|
Made from high grade cast iron. Ground vise bed for smooth consistent jaw movement. Hardened top V-groove jaws. Rugged design and large workload capacity. Jaw Width (in.): 6 Jaw Opening (in.): 6-3/4 Jaw Depth (in.): 2-1/8 Ship Weig
|
|
|
Versatile Drill Press Vise - 6" Jaw Width, 6-3/4" Jaw Opening, 2-1/8" Jaw Depth
* Made from high grade cast iron. * Ground vise bed for smooth, consistent jaw movement. * Hardened top V-groove jaws. * Rugged design and large workload capacity. * Jaw Width (in.): 6. * Jaw Opening (in.): 6-3/4. * Jaw Depth (in.): 2-1/8. * Ship Weight (lbs.): 28.
|
$231
See 2 Stores
See All Stores
|
|
Wilton Versatile Drill Press Vise - 6 Inch Jaw Width, 6-3/4 Inch Jaw Opening, 2-1/8 Inch Jaw Depth WIL63243
Made from high grade cast iron. Ground vise bed for smooth, consistent jaw movement. Hardened top V-groove jaws. Rugged design and large workload capacity. Jaw Width (in.): 6. Jaw Opening (in.): 6-3/4. Jaw Depth (in.): 2-1/8. Ship Weight (lbs.): 28.
|
$245
See 3 Stores
See All Stores
|
|
|
|
|
Wilton® Versatile Drill Press Vises - 63242
|
$140
See 3 Stores
See All Stores
|
|
Wilton 63243 Versatile Drill Press Vise - 6" Jaw Width, 6-3/4" Jaw Opening, 2-1/8" Jaw Depth
Wilton 63243 Versatile Drill Press Vise - 6" Jaw Width, 6-3/4" Jaw Opening, 2-1/8" Jaw Depth. Made from high grade cast iron. Ground vise bed for smooth, consistent jaw movement. Hardened top V-groove jaws. Rugged design and large workload capacity. Jaw Width (in.): 6. Jaw Opening (in.): 6-3/4. Jaw Depth (in.): 2-1/8. Ship Weight (lbs.): 28.
|
$229
See 4 Stores
See All Stores
|
|
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
|
|
|
Wilton 1206, Cam Action Drill Press Vise, 6-3/16" Jaw Opening
Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs.
|
$189
See 2 Stores
See All Stores
|
|
Versatile vises for drilling, grinding, tapping, reaming, etc. All vises can be turned on either side or placed on end for general use.
|
|
|
Traditional drill press vises for drilling, grinding, tapping, reaming, and more. Machined 4 sides so it can be used on sides or end. Replaceable jaw plates except 12251 which has grooved cast jaw. Palmgren numbers 12301 and 12602 have side grooves for mounting brackets. Made of FC25 fine grain cast iron. Two year warranty. USA
|
|
|
Wilton 1208, Cam Action Drill Press Vise, 8-3/16" Jaw Opening
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
|
$259
See 3 Stores
See All Stores
|
|
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS...
|
|
|
Wilton 1360, Drill Press Vise Continuous Nut, 6" Jaw Opening
Wilton 1360, Drill Press Vise Continuous Nut, 6" Jaw Opening
|
$119
See 2 Stores
See All Stores
|
|
Quick Slide Drill Press Vise Jaw Width 4" * Jaw Width 4"* Jaw Opening 4-11/16"* Jaw Depth 1-5/16"* Made of strong stress relieved iron castings.* Precision ground guide bar for smooth, rapid movement. * Locking clamp for tight, accurate holding.* Vise Weight 19 lbs. 575 N. Hague Ave.Columbus, Ohio. 43204 Phone # 1-800-543-5998 Pay me securely with any major credit card through PayPal! On Jul-08-08 at 16:05:52 PDT, seller added the following information:
|
|
|
Much more accurate and stable than the traditional screw and cross plate means of attaching the movable jaw to the vise bed
|
|
|
* Simple push or pull on the center bar knob sets the jaw in position. * Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 Ibs. * Base is designed for clear through drilling applications. * Unique top locking lever can be raised or lowered to tighten or loosen against the workpiece. * Jaw Width (in.): 6. * Jaw Opening (in.): 6-3/16. * Jaw Depth (in.): 1-13/16. * Ship Weight (lbs.): 34.
|
|
|
* Traditional drill press vises for drilling, grinding, tapping, reaming, and more. * Machined 4 sides so it can be used on sides or end. * Replaceable jaw plates except 12251 which has grooved cast jaw. * Palmgren numbers 12301 and 12602 have side grooves for mounting brackets. * Made of FC25 fine grain cast iron. * Lifetime guarantee. * MADE IN USA.
|
|
|
Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs.
|
|
|
4 Inch Quick Release Drill Press Vise (3/4 inch X 4 inch Jaw with 4 inch Opening)
The Delta 20-622 is a 4 inch Quick Release Drill Press Vise that holds wood and metal work pieces up to 4 inch wide. Features quick-release trigger for instant release of work piece. Built-in groove holds dowels and other round materials. Thru-holes provided for mounting an auxiliary fence.
|
$23
See 2 Stores
See All Stores
|
|
Ground vise bed for smooth, consistent jaw movement
|
|
|
Wilton 13402 Cam Action Drill Press Vise - 6" Jaw Width, 6-3/16" Jaw Opening, 1-13/16" Jaw Depth
Wilton 13402 Cam Action Drill Press Vise - 6" Jaw Width, 6-3/16" Jaw Opening, 1-13/16" Jaw Depth
|
$243
See 4 Stores
See All Stores
|
|
365526 JET - DPV-6BT, Drill Press Vise 6" Jaw Width
Much more accurate and stable than the traditional screw and cross plate means of attaching the movable jaw to the vise bed
|
$95
See 2 Stores
See All Stores
|
|
Online / Catalog Exclusive!
|
|
|
Online / Catalog Exclusive!
|
|
|
Wilton 12800 25 Drill Press Vise, 2-1/2" Jaw Width, 2-9/16"Jaw Opening, 1-1/2" Jaw Depth
Wilton Cam Action/Quick Acting Drill Press Vise, 4- Jaw Width, 4-11/16"Jaw Opening, 1-5/16" Jaw Depth
|
$59
See 2 Stores
See All Stores
|
(US)
