|
This SRF-25 ultrasonic range finder can be used as a distance meter. The distance can be displayed by the 3 8-segment LEDs in unit of meter. The display LEDs can be removed easily as they are connected using headers.
|
|
|
Newcon LRF MOD 2 Laser Rangefinder Module with Speed Detection
Newcon LRF MOD 2 Laser Rangefinder Module with Speed Detection
|
|
|
VEX Robotics Ultrasonic Range Finder Kit
|
|
|
Laser Sighted Ultrasonic Range Finder
Minimum / Maximum Distance: 0.3 m - 15 m (1 ft - 49 ft). Response Time: ~1 second. Accuracy: ~1%. Laser: Class II Laser Product. Wavelength: 630-670 nm. Output: ~1mw. LCD Backlight: YES (6 seconds). Auto Shut-off: YES (~ 60 seconds). Power Source: 1 x 9V Battery. Dimension: 180 x 55 x 40 (L x W x D) in millimeters. Certification: CE. Manufacturer Ref: L2PH99OTCU5Z.
|
|
|
Ultrasonic Range Finder - Maxbotix LV-EZ0
42kHz Ultrasonic sensor. Operates from 2.5-5.5V. Low 2mA supply current. 20Hz reading rate. RS232 Serial Output - 9600bps. Analog Output - 10mV/inch. PWM Output - 147uS/inch. Small, light weight module.
|
|
|
Devantech SRF02 Low cost Ultrasonic Range Finder
DescriptionOverviewUseful links * Ranges from 15cm to 6m * I2C bus and Serial (0-5V) interface * 3-4cm Resolution * Supply Voltage: 5VDC (max 5.5VDC) * Dimensions: 24mm x 20mm x 17mm The Devantech SRF02 Low cost Ultrasonic Range Finder is the lowest cost ultrasonic ranger with both I2C and Serial interfaces. This Sonar module can identify obstacles, 15cm to 6m, and can easily be connected to a microcontroller. Built by Devantech, this ultra-sonic ranger will soon become essential for your...
|
|
|
Ultrasonic Range Finder
Laser Sighting for Accurate Measurement Up to 50 ft. Fast, Automatic Measurements in Imperial or Metric Version. Memory of Calculations and Readings. Automatic Calculation of Length/Area/Volume. Measure Base is Top or Bottom Selectable. Includes 9V Battery. Packaging:White Box.
|
|
|
Devantech SRF235 Ultrasonic Range Finder
The SRF235 is a small sonar with an industrial air coupled transducer, giving a very narrow 15° beam width and fast cycling - up to 100Hz update rate.
|
|
|
Avoid obstacles and measure distances with the ultrasonic range finder. Device emits a high-frequency sound wave that alerts the robot to things in its path. A Programming Kit is needed to change the program in the VEX Controller. * Expand functionality * Avoid obstacles * Measure distances * Create more autonomous function Ultrasonic Range Finder - Technical Info Useable range: 3.0 centimeters - 3.0 meter / 1.5 inches - 115 inches Frequency: 40 KHz Output Function: Echo response from the ultrasonic...
|
|
|
Ultrasonic Range Finder SRF08 with Header
The factory supplied SRF08 provides pads to which you must solder wires or a 5-pin header such as our Header .100" PCB Male 5-Pin . This part is just a standard SRF08 with the header pre-soldered for your convenience. You may also want to order a pre-built cable Cable for Ultrasonic Sensors .
|
|
|
NOTICE: This product will become obsolete as of 1/1/2010 - Please contact Celeritous for availability of this product after 11/23/2009. This page ... more info
|
|
|
Devantech SRF10 Small Ultrasonic Range Finder
Click for larger image The SRF10 is a very small high performance sensor that uses sonar to detect objects. It has a much wider field-of-view than the Sharp infrared distance measuring sensors. Interfaces easily with the Mark III or your own robot design. Comes completely assembled - this is not a kit.
|
|
|
42kHz Ultrasonic sensor. 20Hz reading rate. RS232 Serial Output - 9600bps (it's RS232 not TTL). Analog Output - 10mV/inch. PWM Output - 147uS/inch. Low 2mA supply current. 2.5-5.5V operation range. Small, light weight module.
|
|
|
Ultrasonic range finder with accurate measurement up to 50', battery included. Item# - TL09 Ultrasonic range finder. Features include laser sighting for accurate measurement up to 50 ft, fast, automatic measurements in imperial or metric version, memory of calculations and readings, automati... c calculation of length / area / volume, and the measure base is top or bottom selectable. Includes 9V battery. (more)
|
|
|
Devantech Ultrasonic Range Finder SRF05
DescriptionOverviewUseful links * Ranges from 1cm to 4m * Returns a positive TTL level signal, width proportional to range * 3-4cm Resolution * Dimensions: 43mm x 20mm x 17mm The Devantech Ultrasonic Range Finder SRF05 allows you to determine the exact distance of an obstacle in the sonar field of view. The cleverness of your robot will depend on a sensitive sensor similar to the one bats use to know their position and track prey. With advanced programming, you can design compensators in...
|
|
|
Devantech SRF04 Ultrasonic Range Finder
Click for larger image Uses sonar to detect obstacles. Has a much wider field-of-view than the Sharp infrared distance measuring sensors. Interfaces easily with the Mark III or your own robot design. Comes completely assembled - this is not a kit.
|
|
|
Newcon LRF MOD 4CI Laser Rangefinder Module with Elevation/Azimuth Detection 7x50 5.0° Binocular Elevation Detection Azimuth Detection Height Measurement For OEM Applications B&H# NELRFMOD4CI Mfr# LRF MOD 4CI
|
|
|
Newcon LRF MOD 2CI Laser Rangefinder Module with Elevation/Azimuth Detection 7x25 8.0° Monocular Elevation Detection Azimuth Detection Height Measurement For OEM Applications B&H# NILRFMOD2CI Mfr# LRF MOD2CI
|
|
|
NOTICE: This product will become obsolete as of 1/1/2010 - Please contact Celeritous for availability of this product after 11/23/2009. This page will remain in place for the the time being for reference and support only. This is the USB Ultrasonic Rangefinder weathertight enclosure and waterproof cable assembly only. It is for customers who have purchased the board-only version of the USB Ultrasonic Rangefinder and would like to upgrade to the outdoor version. Please order individually and...
|
|
|
Devantech SRF01 Ultrasonic Range Finder
* Ranges from 0cm to 600cm. * One Pin Serial Bus @ 9600 baud. * 3-4cm Resolution. * Supply. * Dimensions: 20mm diameter x 4 cm. *. *. * Frequency - 40KHz. * Range - 18cm to 600cm (Industrial spec', no calibration required). * Range - 0cm to 600cm (Hobby spec' after auto-calibration). * Connection - One Pin Serial Bus @ 9600 baud. * Up to 16 SRF01's connected to a single pin on your controller. * Units - Range reported in cm or inches. * Very light weight, just 2.7gm.
|
|
|
|
Product Info Ultrasonic Range Finder - Maxbotix LV-WR1 sku: SEN-09009 Description: This is the new, weather resistant, field-hardened WR1 from Maxbotix. The WR1 uses a robust PVC housing, is designed to meet IP67 water intrusion, and matches standard electrical 3/4" PVC pipe fittings. We are extremely pleased with the size, quality, and ease of use of this low voltage weather-resistant range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces...
|
|
|
Designed for ranging against difficult, soft or diffuse targets. All-weather use down to -15C. Conformal Coated PCB. Weather tight connector and enclosure. Dual transducer design for minimum blind range. USB 2.0 Compatible. Flash based microcontroller with non-volatile setup memory. Compact size (4" x 4" x 3" ). Low Power (approximately 50mA per unit at full rate). Fully programmable ranging parameters. Free USB drivers. Example code and diagnostics program with source. Up to 16 sensors...
|
|
|
|
Product Info Ultrasonic Range Finder - Maxbotix LV-EZ3 sku: SEN-08501 Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or...
|
|
|
|
Product Info Ultrasonic Range Finder - Maxbotix LV-EZ4 sku: SEN-08504 Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead...
|
|
|
|
Product Info Ultrasonic Range Finder - Maxbotix LV-EZ1 sku: SEN-00639 Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or...
|
|
(US)
