|
Tiella 800MPSF4 Track Accessory
Four inch round surface canopy with one MonoPoint port. Use in conjunction with any MonoPoint element to create a decorative ceiling or wall fixture. Transformer fits in the 2 inch high by 4.5 inch diameter housing. Includes 12 volt, 50 watt electronic transformer. Dimmable with standard incandescent dimmer. If wall mounting, head should be no longer than 6 inches. Mounts to 4 inch square electrical box with round plaster ring, not included.Note: For use with any Tiella MonoPoint pendants and heads...
|
|
|
Tiella 800RLSRT Track Accessory
Surface transformers convert standard 120 line voltage to 12 volts to provide the necessary voltage for powering a low-voltage lighting system. The transformer is concealed inside a decorative housing with a single integral power feed. Available for systems totaling 150 or 300 watts. Electronic transformer is dimmable with 600 watt low-voltage electronic dimmer or standard incandescent dimmer. Magnetic transformers are dimmable with 600 watt low-voltage magnetic dimmers, and include an integrated...
|
|
|
Tiella 800DIM Track Accessory
Dimming a transformer may create a buzzing sound, which may be objectionable in some applications. A debuzzing dimming coil may be wired in series on one of the 120 volt input lines to reduce the audible noise. Select the correct dimming coil based on the wattage of transformer it is to be used with. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: The dimming coil does not dim the system; it functions only to reduce the noise from the transformer...
|
|
|
Tiella 800MPR3 Track Accessory
Round surface canopy with three MonoPoint ports. Use in conjunction with any three MonoPoint elements to create a decorative ceiling fixture. Transformer fits in the 12 inch diameter housing. Includes 12 volt, 150 watt electronic transformer, for three 50 watt ports. Dimmable with standard incandescent dimmer. For ceiling installation only. Mounts to 4 inch square electrical box with round plaster ring, not included.Note: For use with any Tiella MonoPoint pendants and heads, sold separately.
|
|
|
Tiella 800RLCCAP Track Accessory
The decorative end cap fits onto the end of the Rail run for a finished look. Order one for each end. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.
|
|
|
Tiella 800MP4RF Track Accessory
Four inch round flush canopy with one MonoPoint port. Use in conjunction with any MonoPoint element to create a decorative ceiling or wall fixture. Includes 12 volt, 50 watt electronic transformer that fits in junction box. Dimmable with standard incandescent dimmer. If wall mounting, head should be no longer than 6 inches. Mounts to 4 inch square electrical box with round plaster ring, not included.Note: For use with any Tiella MonoPoint pendants and heads, sold separately.
|
|
|
Tiella 800RLP4C02 Track Accessory
A single-feed canopy is mounted to the ceiling above the rail run. It brings power to the rail run from a remote transformer, sold separately. The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. This product can mount to either a four inch square electrical box with round plaster ring or an octagon electrical box, not included. For use with a single-feed remote transformer, sold separately. Note: If dropping the rail more than two inches below...
|
|
|
Tiella 800RLREC15 Track Accessory
A 150 watt electronic transformer and white single-feed canopy is mounted to a six inch recessed lighting housing in the ceiling above the rail run. Includes incandescent socket base adaptor for screw-in power connection. This product is suitable for indoor dry locations only. Dimmable with a low voltage electronic dimmer. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: The Tiella Rail recessed can transformer can be used with the following...
|
|
|
Tiella 800RLSVLT Track Accessory
Installs between the rigid or adjustable standoff, sold separately, and the ceiling to position rail parallel to the floor. Use to install a Rail system to a vaulted ceiling. Use one with each standoff when installing a Rail system to a vaulted ceiling. Includes several rod lengths to achieve the proper pitch when used with a surface transformer. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: Canopy and Standoffs not included.
|
|
|
Tiella 800MPREC6 Track Accessory
Use to retrofit existing six inch recessed down lights with a MonoPoint element. Includes a 12volt, 50 watt electronic transformer and a white canopy. Includes incandescent socket base adaptor for screw-in power connection. This product is suitable for indoor dry locations only. Dimmable with standard incandescent dimmer. For use with any Tiella MonoPoint pendants and heads, sold separately.Note: The Tiella MonoPoint Recessed Can Adapter is ETL listed for use with the following recessed cans: Juno...
|
|
|
Tiella 800RLP4CEN Track Accessory
To be used with a remote transformer, the flexible center power feed with canopy brings power from a ceiling or wall mounted junction box to the Rail when the junction box is not located directly above the Rail. Includes 12' feet of field-cuttable flexible leads. Use with a single-feed remote transformer, sold separately. Mounts to four inch square electrical box with round plaster ring, not included. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately...
|
|
|
Tiella 800RLP4C40 Track Accessory
A dual-feed canopy is mounted to the ceiling above the rail run. It brings power to the rail run from a remote transformer, sold separately. The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. This product can mount to either a four inch square electrical box with round plaster ring or an octagon electrical box, not included. For use with a dual-feed remote transformer, sold separately. The shortest rigid standoff that can be used with a dual...
|
|
|
Tiella 800RLPJMP Track Accessory
Use a power jumper to transfer power from one Rail system to another. Includes 36 inches of field-cuttable flexible leads. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: Transformer not included.
|
|
|
Tiella 800RLPKEXT Track Accessory
Add an additional 8 feet to your rail run. Includes 8 foot rail and three standoff supports for drops of 2 to 24 inches. Field-cuttable for custom drop height. For use with Tiella Rail Kits. Tiella Transformer Rail Kit and accessories must be purchased separately.Note: Transformer and elements are not included.
|
|
|
The adjustable standoff cable virtually disappears for a clean look. It is best used on fairly straight runs with a drop greater than six inches. A wire grip allows you to easily shorten or lengthen the cable to size it for use. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.
|
|
|
Tiella 800MPPRT Track Accessory
Use to power a series of MonoPoint elements from a remote transformer, sold separately. Minimal install hole of 1½ inch diameter, 2½ inch deep. Can be installed in a range of locations. access to back of ceiling is not needed. If wall mounting, head should be no longer than 6 inches.Note: Transformer not included. For use with any Tiella MonoPoint pendants and heads, sold separately.
|
|
|
Tiella 800RLTBAR Track Accessory
To install a Rail system to a T-bar drop ceiling, add a T-bar connector to every standoff (sold separately). The T-bar clip twists into the slat. Specify 15/16 or 9/16 inch slat. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: Use only if local electrical codes allow. Standoffs not included.
|
|
|
Tiella 800RLP4CD Track Accessory
The direct-end power feed brings power from a remote transformer to the Rail at an end of the run and mounts to a wall perpendicular to the run. Use with a single-feed remote transformer, sold separately. Mounts to four inch square electrical box with round plaster ring, not included. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: Transformer not included.
|
|
|
Tiella 800MPL3 Track Accessory
Manufacturer: Tiella Type: Track Accessories & Transformers, Transformer: Electronic Transformer Feed: Three Port Finish: Bronze Wattage: 150 Watt Maximum Description: Linier surface canopy with three MonoPoint ports. Use in conjunction with any three MonoPoint elements to create a decorative ceiling fixture. Transformer fits in the 28 by 4 inch housing. Includes 12 volt, 150 watt electronic transformer, for three 50 watt ports. Dimmable with standard incandescent dimmer. For ceiling installation only. Mounts...
|
|
|
Tiella 800RLCHED Track Accessory
Use to adapt a MonoPoint head or pendant to a Tiella Rail system. For use with Tiella Rail. Tiella transformer, rail, and accessories must be purchased separately.Note: Rail MonoPoint connectors are included with all RL- prefixed MonoPoint heads and Pendants.
|
|
|
Tiella 800AT Track Accessory
Manufacturer: Tiella Type: Track Accessories & Transformers, Transformer: Magnetic Transformer Wattage: 150 Watt Maximum Description: This remote transformer converts standard 120 volt line voltage to 12 volts, providing the necessary voltage for powering a low-voltage lighting system. Can be used to power lamps totaling up to 150, 300, or 600 (two runs of 300) watts. Equipped with fast-acting secondary circuit breaker that will safely turn off the system should a short occur. Once the short has been removed the breaker can be reset. Should be installed in an accessible location above the ceiling or in a closet. To simplify installation the transformer should be located no more than 20 feet from the run or power feed. 100 and 300 watt transformers are dimmable with a 600 watt low-voltage dimmer and must be used with a single-feed canopy or other power feed option (sold separately). 600 watt transformer is dimmable with a 1000 watt low-voltage dimmer must be used with a dual-feed canopy or two other power feed
|
|
|
Tiella 800PLUG Track Accessory
Manufacturer: Tiella Type: Track Accessories & Transformers, Finish: Black Description: 16 foot cord with inline switch and plug for standard power outlets. For use with Tiella Rail Systems only. Tiella Rail System and accessories must be purchased separately.Note: Canopy and transformer not included.
|
|
|
Manufacturer: Tiella Type: Track Accessories & Transformers, Finish: Satin Nickel Description: Drop the rail run farther down from the ceiling. Kit includes a 24 inch power extender to attach to the transformer or canopy, plus two 24 inch rods to lengthen the standoff supports. Field-cuttable for custom drop height. For use with Tiella Rail Kits. Tiella Rail Kit and accessories must be purchased separately.Note: Rail and Standoffs are not included.
|
|
(US)
