|
Threshold Ramp 3"
Lengths: 17 Used for sliding doors thresholds raised landings etc. Dimensions: 17 L x 34 W
|
|
|
This slip resistant ramp is designed to be used on any surface and can easily be trimmed or notched for a custom fit. Made of 100% recycled materials. Ideal for indoor and outdoor use and can easily be moved to another location if needed. Ramp does not interfere with door tracks, making it great for use with sliding glass doors. Usable width is 36 in. (42 in. overall including bevels) with a maximum height of 1-1/2 in and a length of 12 in.
|
|
|
EZ-ACCESS Threshold Ramp - Threshold Ramp The EZ-ACCESS Threshold Ramp is a durable, inexpensive alternative when a ramp is not feasible or available. It bridges most standard and sliding door entries, allowing wheelchairs and scooters to enter and exit doorways with ease. The EZ ACCESS Threshold Ramp may be used for rises and features a durable 34" (86cm) wide, non-skid driving surface for maximum safety and support. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. EZ-ACCESS Threshold Ramp Features: Smooth and safe bridge door access Bridges most standard and sliding door entries Non-skid driving surface for fall prevention Affordable alternative to more expensive mobility ramps Anodized aluminum finish resists scratches and won't rust No tools required, simply place the ramp down and it's ready to use All Ramps can hold up to 600 lbs EZ-ACCESS Threshold Ramp Dimensions: 1" ramp: works best for 0.75" to 1.25" rise. Dimensions: 6
|
|
|
designed to enable users of scooters and wheelchairs to enter and exit through standard or sliding doors with a threshold ranging from 1"-3" (2.5 -7.6 cm). each 34" (86cm) wide rust-proof aluminum ramp has a non-skid surface for added safety. for sliding glass or extra-wide doors two ramps can be placed side-by-side. to choose correct size ramp measure both the inside and outside of the door entry and refer to sizing chart. accommodates up to 600 lbs. (273 kg).
|
|
|
Rubber Beveled Threshold Ramp 1.5"
Rubber Beveled Threshold Ramps from EZ-Access create an easy ground-to-sill transition for your scooter or wheelchair while preventing skidding or slipping. Are you looking for something more environmental friendly, too? Don't fret, these ramps are made from 100% recycled tires and can withstand years of punishing use.
|
|
|
EZ Edge™ Threshold Ramps Get over the little bumps in life with a heavy-duty, slip resistant, rubber ramp. All EZ Edge™ Ramps have a 1:12 slope ratio at any height and meets specific ADA requirements. Sloped sides allow you to enter doorways easily from any angle. Just place against your indoor or outdoor threshold, and bumps disappear. Ramp can be trimmed, height or width to meet your specific needs.
|
|
|
Designed for doorways. Lightweight durable aluminum. Anti-slip, high traction surface. Easy to handle and set up. Hardware provided to secure ramp to surface. Holes punched in top corners for easy installation. Maximum ramp capacity: 800 lbs.
|
|
|
8-inch Threshold Ramp Small threshold ramp is designed for doorways Perfect solution for overcoming various threshold issues Made of aluminum Anti-slip traction tape on surface is lightweight yet durable Accommodates threshold heights of 1/4 inch to 1-3/8 inch Pre-drilled holes in the top corners for easy installation Weighs 3 pounds Measures 8 inches long x 32 inches wide Maximum single axle capacity is 300 pounds and 600 pounds for double axles Complete with hardware for securing in doorway ...
|
|
|
All threshold ramps are: For scooters and wheelchairs to make doorways sliding glass doors and raised landings easy to travel over * Easily installed * Made of extruded anodized aluminum that will not rust or corrode * 600 Lbs. weight capacity * Limit of use: 1 1/4 to 1 3/4 * Lengths: 9 1/2 * Used for sliding doors thresholds raised landings etc. * Dimensions: 9 1/2 L x 34 W
|
|
|
EZ-ACCESS Threshold Ramp
EZ-ACCESS Threshold Ramp - Threshold Ramp The EZ-ACCESS Threshold Ramp is a durable, inexpensive alternative when a ramp is not feasible or available. It bridges most standard and sliding door entries, allowing wheelchairs and scooters to enter and exit doorways with ease. The EZ ACCESS Threshold Ramp may be used for rises and features a durable 34" (86cm) wide, non-skid driving surface for maximum safety and support. The anodized finish resists scratches and won't rust, leaving a clean, attractive...
|
|
|
Item will be drop shipped directly from the manufacturer/distributor. Item is non-cancelable and non-returnable. Estimated delivery time is 2-4 weeks
|
|
|
EZ-Access Rubber Threshold Ramps
Simply place against the door threshold (inside or outside) to provide a smooth ground-to-sill transition. Standard width is 48" (for wider entrances, place 2 ramps side-by-side). Ramp can easily be trimmed for lower heights and widths or combined to reach greater heights. Price shown is for 1½-IN Rubber Threshold Beveled Boxed (1 EA) Ramp
|
|
|
Materials: Aluminum. Usable Size: 8 inch: 8 x 32 in 10 inch: 10 x 32 in 12 inch: 12 x 32 in 16 inch: 16 x 32 in 24 inch: 24 x 32 in 36 inch: 36 x 32 in. Weight Capacities: 700 lbs. Surface: Grip tape. Compatible with: Scooters, Wheel chairs. Weight: 8 inch: 8.00 lbs 10 inch: 10.00 lbs 12 inch: 12.00 lbs 16 inch: 15.00 lbs 24 inch: 23.00 lbs 36 inch: 35.00 lbs.
|
|
|
2.5" threshold ramp (THRBE 250-1) is 43" x 25" x 2.5"H with a usable width of 36"; weighs approximately 40 pounds. Weight capacity: 850 pounds. Width is 48". For wider entrances, place two ramps side by side. Alternately, this ramp can easily be trimmed for lower heights and narrower widths to fit any entrance or threshold.
|
|
|
Threshold self supporting ramps are simple, lightweight, solutions for smoothing uneven door thresholds, whether the door swings inward or outward. These ramps are ideal for use on door thresholds where you do not want the ramp to extend onto the threshold plate, including sliding glass doors, doors with storm doors, or raised landings. The ramp aligns directly against the door threshold, keeping the ramp from interfering with, for example, a storm door that swings inward or outward. Mfg's Model No. SSTH
|
|
|
EZ-Access 5" Aluminum Threshold Ramp (EZ-THR5)
Aluminum with non-skid surface. Weighs 15.25 lbs. For use with 4.75" to 5.25" rises. Ideal for doorways, sliding doors, raised landings. May be used one by itself or two combined to make entry or exit easier and safer. Simply measure the height of the transition and choose the correct threshold ramp size.
|
|
|
|
|
|
Threshold Ramp (1" height)
Place threshold ramps from EZ-Access at the door jams in your home to make getting inside and outside your home trouble-free. Their lightweight aluminum construction is rustproof and strong.
|
|
|
Silver Star's solid threshold ramp provides long-term access for mobility devices to a variety of environments. Lightweight but strong, this ramp features a 600 lbs. weight capacity to accommodate heavier users and wheelchairs. The ramp also features built in traction control and is slotted for moisture drainage. Available in a variety of lengths.
|
|
|
Guldmann Threshold Ramp,26" width,Each
Threshold ramp is used for negotiating doorsteps. It is an aluminium plate with a non-slip black surface and is placed over the existing threshold to offset height differences between two rooms.Next Business Day / Second Business Day shipping is not available on this item
|
|
|
EZ-Access Rubber Threshold Ramp with Beveled Sides -
EZ-Access Rubber Threshold RampWith Beveled Sides The EZ-Access Rubber Threshold Ramp with Beveled Sides is designed for doorways and raised landings to make entry and/or exit convenient and safe. Ramp simply sits against the doorsill (inside or outside) to provide a smooth ground to sill transition and is especially practical for sliding glass doors because it does not interfere with the door track. Ramp rise is from 1/4" to 1-1/2" but can be trimmed back to accommodate less than 1-1/2" rise. Made of 100% recycled tires, The Rubber Threshold ramp is ideal for indoor and outdoor use and because the ramp is fully portable, it provides the ability to move it to another door or location if desired. Made in the USA. EZ-ACCESS Rubber Threshold Ramp Features: Made of Rubber - 100% recycled tires Ramp sold singly (1 ea) or Pair (2 ea) Sides are Beveled for aesthetics Can be custom cut with saw or knife Non-skid surface Rubber Threshold Ramp with Beveled Sides SPECIFICATIONS RAMPTHRW36 150-1 Made of 100
|
|
|
For scooters and wheelchairs. The EZ-ACCESS Threshold Ramp is a lightweight yet durable modular ramp designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size.Constructed of extruded, anodized aluminum that will not rust or corrode. Features a durable non-skid driving surface. Easy installation.
|
|
|
Length: 4'. Width: 2'. Height: 2.5". Weight Capacity: 850 lb. Ramp Weight (total): 80 lb. Ramp Weight (heaviest piece): 80 lb. Folding: No. Ramp Material: Rubber. Carrying Handle: No. Safety Straps: No.
|
|
|
Designed for doorways. Lightweight durable aluminum. Anti-slip, high traction surface. Easy to handle and set up. Hardware provided to secure ramp to surface. Holes punched in top corners for easy installation. Maximum ramp capacity: 800 lbs.
|
|
|
Designed for doorways Holes punched in top corners for easy installation Lightweight, durable aluminum Anti-slip, high traction surface Hardware provided to secure ramp to surface Maximum ramp capacity is 300 lbs on a single axle or 600 lbs on two axles Suitable for threshold height of .75 to 1 inch Weight - 5 lbs Length - 12" Width - 32"
|
|
(US)
