|
|
|
|
Pitman Arm/Tie Rod End Puller. The versatile design allows this tool to be used as a Pitman. arm remover for many small, domestic rear wheel drive vehi-cles, or as a tie rod end puller for many domestic and import. vehicles.
|
|
|
Used for the removal of the tie rod ends. Applicable for VW type 1 and 3. Height-36mm, Width-36mm, Opening-18mm.
|
|
|
Remove tie rod ends the correct way. Opening size is 1-1/16” with a pull travel of 2-1/8” Features include a 3/8” drive square port center drive screw and a heavy duty forged alloy steel yoke.
|
|
|
OTC 6497 Super-Duty Pitman Arm Puller/Tie Rod End Puller
Product Description-OTC (Division of SPX Corp.) OTC6497 The OTC 6497 is a Super-Duty Pitman Arm Puller/Tie Rod End Puller. The OTC 6497 works on 2005 and newer Ford F-250 and F-350 four-wheel drive super-duty trucks. The Pitman arm can be removed from the steering gear while the steering gear is still in the vehicle. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip. Includes-OTC (Division of SPX Corp.) OTC6497 OTC 6497 Pitman Arm/Tie Rod End Puller Application-OTC (Division...
|
|
|
The versatile design allows this tool to be used as a Pitman arm remover for many small, domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a positive grip in tight work places.
|
|
|
Used for the removal of the tie rod ends. Applicable for VW type 2. Height=45mm, Width=44mm, Opening=23mm.
|
|
|
Use as a Pitman arm remover for many small domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. 1-1/16 in. & 2-1/8 in. (27 & 56mm) maximum opening capacity.
|
|
|
S80 (07-), S80 (-06), XC90, V70 (00-08), V70 XC (01-) / XC70 (-07), S60, 440, 460, 480, S40 (-04), V40, 850, C70 Coupe (-02), C70 Conv (-05), S70, V70 (-00), V70 XC (-00), 940, 940 SE, 960, S90, V90
|
|
|
Designed for Porsche tie rods, our thin wrench gets in where others cannot. Use the 46mm spanner for removing and installing tie rods Porsche.(except Turbo)
|
|
|
|
|
|
OTC Tools & Equipment 6296. OTC6296. OTC-6296. OTC 6296.
|
|
|
Product Description-Performance Tools W80557 Heavy duty forged alloy steel yoke Heat treated center screw Removes tie rod ends and pitman arm assemblies from many cars and light trucks Opening size 1-1/16” - Pull travel 2-1/8” Specifications-Performance Tools W80557 Model Number: W80557 Weight: 1 lb(s)
|
|
|
Supersedes part number 128-2. Puller used for the removal of the tie rod ends. Applicable for VW type 2. Height: 45mm. Width: 44mm. Opening: 23mm.
|
|
|
: This versatile set allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints: Kit Contents: 2289 Pitman Arm Puller 22 x 140mm, 3533 Tie Rod Puller, 3916 Universal Ball Joint Separator, 3917 Tie Rod End Puller and Pitman Arm Puller, and 3918 Universal Tie Rod End Remover
|
|
|
Wilmar W80557 - Tie Rod End/Pitman Arm Puller
|
|
|
Universal Tie Rod End and Ball Joint Puller. Opens from 5 to 55mm, with a 30mm inside opening and an overall outside size of 47mm. Compareable to VW tool # 3287 A.
|
|
|
This tool makes removal of the tie rod ends quick and easy without tearing the boots.
|
|
|
The design of this universal tool makes it easy to remove tie rod ends without tearing the boots. Compact size allows you to carry the tool along on an off-road outing for fast repairs.
|
|
|
|
|
|
This tools unique screw joint offers a wide gripping range. Well-suited for the job because of the tool's parallel arrangement of the top & bottom jaw plates.
|
|
|
Used for R and R of Tie Rod Ends. Applicable to VW Type 1 and 3. Height: 36mm. Width: 36mm. Opening: 18mm.
|
|
|
|
This is a must if you are going to do any driveline work. We call it a pickle fork, technically it is a Tie Rod End Puller. You simply stick the forks in and tap it with a hammer.
|
|
|
|
|
|
|
|
(US)
