|
Advance Adapters warranties all of their products for a period of 90 days from the date of purchase. We warrant that these products will be free from defects n material and workmanship under customary and normal installation, use and service. We do not warranty the chrome plating on our exhaust systems and the use of aftermarket header wrap products will void header warranty. The Ranger Torque Splitter transmission, Saturn Overdrive and the Atlas transfer case have a 12-month warranty period from...
|
|
|
Advance Adapters Ford AOD Pre 1987 Transmission To Jeep Dana 300 Transfer Case
|
|
|
Ford C4 Transmission To Jeep Dana 300 Transfer Case
Discount Jeep Parts - Lowest Prices, Best Quality - Ford C4 Transmission To Jeep Dana 300 Transfer Case
|
|
|
Advance Adapters Jeep AX15 Transmission To Jeep Dana 300 Transfer Case
|
|
|
The Ford C4 adapter to the to the Jeep Dana 300 transfer case is 6.250. Adapter material is a strong 356-T6 heat treated aluminum alloy and the adapter has a provision for a transmission mount. The adapter kit includes a adapter housing, new C4 output shaft, vent, bearing, seal, gasket, fastening hardware, and adapter instructions.
|
|
|
Advance Adapters Dana 300 Rotation Kit, Dana 300 to 1989-00 AX15
*Dana 300 must be used with a passenger side front axlE. Since ground clearance is a concern for most vehicles, Advance Adapters has developed a rotation kit to allow the Dana 300 to be clocked at a higher than stock rotation. The kit allows up to four different rotations than stock. The adapter is .75? thick and includes a new longer input shaft for the Dana 300. The kit retains the proper spline engagement and proper indexing for the Dana 300 transfer case. Kit works on all Jeep Dana...
|
|
|
*Includes new input shaft. Since ground clearance is a concern for most vehicles, Advance Adapters has developed a rotation kit to allow the Dana 300 to be clocked at a higher than stock rotation. The kit allows up to four different rotations than stock. The adapter is .75” thick and includes a new longer input shaft for the Dana 300. The kit retains the proper spline engagement and proper indexing for the Dana 300 transfer case. Kit works on all Jeep Dana 300s with a 23 spline input. Will not work...
|
|
|
About the only weakness we've seen on the Dana 300 is the output shaft. The stock Dana 300 output shaft is a 1-1/8 diameter 26 spline. We now offer a new, larger 1-3/8 diameter 32 spline output shaft for this transfer case. This kit comes complete with a new tailhousing, output shaft, tapper roller bearings, and speedometer drive. when you require strength and reliability, then you must install the Advance Adapters Dana 300 output shaft kit.
|
|
|
Transfer Case Adapter For 700R 4x4 To Dana 300 Transfer Case
This kit is designed for exclusive use with the 4wd 700R-4 / 4L60 / 4L60E manufactured thru 1996. The overall case length of the transmission is 23.375, has a non-removable bell housing, and a 4 bolt square rear case. Late model 4L60E automatics will have a removable bell housing and a 6 bolt hex pattern rear case. The late model automatic will require an additional Advance Adapter to work with this kit (50-0405).
|
|
|
The Dana Model 300 transfer case has developed a reputation of being strong and durable. The only weakness is the output shaft. Advance Adapters has put together a kit to upgrade from the stock 1-1/8” diameter 26 spline output to a stronger 1-3/8” 32 spline output shaft. This kit includes new output shaft, rear tailhousing, yoke, bearings, seals and other necessary hardware.
|
|
|
The Powerglide to Jeep Dana 300 transfer case adapter is 2.32 in length. The adapter material is 356 T6 heat treated aluminum alloy. The adapter kit includes an adapter housing, new Dana 300 input shaft, crossmember mount kit, fastening hardware, and adapter instructions.
|
|
|
Discount Jeep Parts - Lowest Prices, Best Quality - Transfer Case Adapter For Ford AOD (1988 & Up) Transmission To Jeep Dana 300
|
|
(US)
