|
1/2" Drive, 6 Point Standard Fractional Impact Socket - 1 1/4"
Corrosive resistant Laser engraved every 120° SureGrip® hex design drives the side of the fastener, not the corner Made in the U.S.A Lifetime Warranty Size: 1-1/4" Diameter: 1.75" Length: 1.96"
|
|
|
Sunex 221UM, 1/2in. Drive Standard 6 Point Flex Impact Socket 21mm
Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability. Radius corner design - to extend the life of fasteners. Used for the hard to reach fasteners. Size: 21mm. Fully guaranteed.
|
|
|
1/2" Drive, 6 Point Standard Fractional Impact Socket - 1 1/4" by SK Hand Tool
Features and Benefits: Corrosive resistant Laser engraved every 120 degrees SureGrip hex design drives the side of the fastener, not the corner Made in the U.S.A. Lifetime warranty This 6 point impact socket is 1.75 in diameter and 1.96 in length.
|
|
|
SK Hand Tool 34324 1/2" Drive, 6-Point Standard Swivel Fractional Impact Socket - 3/4"
SK Hand Tool 34324. SKT34324. SKT-34324. SKT 34324. SK34324. SK 34324.
|
|
|
SK 34024 - 1/2 inch Drive, 6-Point Standard Fractional Impact Socket - 3/4 inch SKT-34024 SKT34024 SKT 34024
* The patented SureGrip® hex design drives the side of the fastener not the corner. This not only provides increased strength, but also avoids rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. * Improved Coating: The black coating retains more rust preventative compound than black oxide. * Standard length
|
|
|
Sunex (SUN566) 1in. Drive Standard 6 Point Impact Socket 2-1/16i
Sunex (SUN566) 1in. Drive Standard 6 Point Impact Socket 2-1/16i
|
|
|
1/2" Drive, 6 Point Standard Swivel Fractional Impact Socket -1-1/4" (SK Hand Tool - 34340)
* Corrosive resistant and laser engraved every 120°. * 30 degree flex angle and smooth collar design. * SureGrip® hex design drives the side of the fastener, not the corner. * Made in the USA. * Lifetime Warranty.
|
|
|
SK 34324 - 1/2 inch Drive, 6-Point Standard Swivel Fractional Impact Socket - 3/4 inch SKT-34324 SKT34324 SKT 34324
* The patented SureGrip® hex design drives the side of the fastener not the corner. This not only provides increased strength, but also avoids rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool.
|
|
|
SK Hand Tool 34024 1/2" Drive, 6-Point Standard Fractional Impact Socket - 3/4"
SK Hand Tool 34024. SKT34024. SKT-34024. SKT 34024. SK34024. SK 34024.
|
|
|
Hitachi 728530 13 Piece, 1/2" Square Female Drive Standard Length, 6 Point Impact Socket Set
|
|
|
Sunex 2652, 14 Piece 1/2in. Drive Standard Metric 6 Point Impact Socket Set
Sunex Tools impact sockets can be purchased individually or in a set (as shown). All Sunex Tools impact sockets are forged from the finest chrome molybdenum alloy steel- the best choice for strength and durability. Lifetime, full replacement warranty (except for socket adapters and extra thin wall sockets. All Sunex Tools impact sockets feature a radius corner design. This design causes the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners, resulting in less...
|
|
|
* The patented SureGrip® hex design drives the side of the fastener not the corner. This not only provides increased strength, but also avoids rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. * Improved Coating: The black coating retains more rust preventative compound than black oxide. * Standard length
|
|
|
SK Hand Tool 1/2 Inch Drive, 6 Point Deep Fractional Impact Socket - 1-1/4 Inch
Model # : SK 34240 Item Id: 373664 SK Hand Tool 1/2 Inch Drive, 6 Point Deep Fractional Impact Socket - 1-1/4 Inch: The patented SureGrip hex design drives the side of the fastener not the corner. This not only provides increased strength, but also avoids rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Improved Coating: The black coating retains more rust preventative compound than black oxide. Deep length Weight: 2 pounds
|
|
|
The patented SureGrip hex design drives the side of the fastener not the corner. This not only provides increased strength, but also avoids rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool.
|
|
|
1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8" Sockets. Packaged on a rail.
|
|
|
SK 11 Pc 1/2" Drive, 6 Point Standard Fractional Impact Socket Set
Unique nose-down design provides for improved access to hard-to-reach fasteners. Improved coating for better rust resistance.
|
|
|
* Corrosive resistant. * Laser engraved every 120°. * SureGrip® hex design drives the side of the fastener, not the corner. * Made in the U.S.A. * Lifetime Warranty. * Size: 3/4". * Diameter: 1.13". * Length: 1.53".
|
|
|
Sunex 218U, 1/2in. Drive Standard 6 Point Flex Impact Socket 9/16in
Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability. Radius corner design - to extend the life of fasteners. The design drives the side of the fastener not the corners. Provides increased strength, but also avoids rounding of rusted or damaged fasteners. Fully guaranteed.
|
|
|
Sunex 214UM 1/2" Drive Standard 6 Point Universal Impact Socket 14mm
|
|
|
* Corrosive resistant. * Laser engraved every 120°. * SureGrip® hex design drives the side of the fastener, not the corner. * Made in the U.S.A. * Lifetime Warranty. * Size: 3/4". * Diameter: 1.13". * Length: 1.53".
|
|
|
Sunex 572 1" Drive 6 Point Standard SAE Impact Socket, 2-1/4"
Sunex 572 1" Drive 6 Point Standard SAE Impact Socket, 2-1/4"
|
|
|
* Corrosive resistant and laser engraved every 120°. * 30 degree flex angle and smooth collar design. * SureGrip® hex design drives the side of the fastener, not the corner. * Made in the USA. * Lifetime Warranty.
|
|
|
1/2" Drive, 6 Point Standard Fractional Impact Socket - 1 1/8"
Corrosive resistant Laser engraved every 120° SureGrip® hex design drives the side of the fastener, not the corner Made in the U.S.A Lifetime Warranty Size: 1-1/8" Diameter: 1.63" Length: 1.96"
|
|
|
SK Tools 85671, 1in. Drive Standard 6 Point Impact Socket 2-1/4in
SK Tools 85671, 1in. Drive Standard 6 Point Impact Socket 2-1/4in.
|
|
|
SK Hand Tool 1/2 Inch Drive, 6 Point Standard Metric Impact Socket - 24 Mm
Model # : SK 34074 Item Id: 373643 SK Hand Tool 1/2 Inch Drive, 6 Point Standard Metric Impact Socket - 24 Mm: Corrosive resistant Laser engraved every 120 SureGrip hex design drives the side of the fastener, not the corner Made in the U. S. A Lifetime Warranty Weight: 1 pounds
|
|
(US)
