|
Bezel Mandrels Primarily used to form bezels, these mandrels are also used to shape decorative ornaments, make chain links etc. Made of hardened and tampered steel, approximately 11 long, mandrel portion is 8 (except round 8 length), with 1/2 to 1/8 taper. Made in the USA.
|
|
|
Stepped aluminum mandrel securely mounts on a steel base and easily rotates 360°. The smooth round steps allow you to precisely size rings when wax working or using metal clay. Mandrel is clearly marked with sizes 413 and can be removed from the stand for handheld use. 13" total length.
|
|
|
Stepped Ring Mandrel - Half Sizes Sizes 3 1/2-15 1/2, 1" steps. 13 1/2" length. Use for sizing and shaping wide shank rings without distortion that a tapered mandrel could cause.
|
|
|
These non-tapered mandrels are great for wide bands or wax models. The aluminum cannot withstand being pounded by a hammer. Each "step" of the mandrel is one size. This will eliminate any size taper when working on wider bands. The steps range in size from 3-1/2 thru 15-1/2. Each step is 1 full size large than the previous (eg. 3-1/2, 4-1/2, 5-1/2, etc.).
|
|
|
Having straight walls on the mandrels makes flipping the ring to achieve a balanced stretch a thing of the past. This quality ring stretcher and reducer can stretch plain band rings from size 1 to 15, and reduce plain band rings up to 12mm wide.
|
|
|
Enlarge and reduce rings quickly with this great tool. Traditional stretchers use a tapered mandrel to stretch rings in two steps (first on one side, then on the other), often yielding uneven and disappointing results. This stretcher uses a stepped, straight-walled mandrel to enlarge rings uniformly in just a single step. Stretches sizes 115. Also includes reducer plate for gently compressing rings to smaller sizes.
|
|
|
These non-tapered mandrels are great for wide bands or wax models. The aluminum cannot withstand being pounded by a hammer. Each "step" of the mandrel is one size. This will eliminate any size taper when working on wider bands. The steps range in size from 4 thru 16. Each step is 1 full size large than the previous (eg. 4, 5, 6, etc.).
|
|
|
Enlarge and reduce rings quickly with this great tool. Traditional stretchers use a tapered mandrel to stretch rings in two steps (first on one side, then on the other), often yielding uneven and disappointing results. This stretcher uses a stepped, straight-walled mandrel to enlarge rings uniformly in just a single step. Stretches sizes 115. Also includes reducer plate for gently compressing rings to smaller sizes.
|
|
|
The ring sizes on this steel mandrel are straight, making it useful when working on wider rings. Full sizes from size 4 through 16.
|
|
|
These non-tapered mandrels are great for wide bands or wax models. The steel can withstand being pounded by a hammer. Each "step" of the mandrel is one size. This will eliminate any size taper when working on wider bands. The steps range in size from 3-1/2 thru 15-1/2. Each step is 1 full size large than the previous (eg. 3-1/2, 4-1/2, 5-1/2, etc.).
|
|
|
These non-tapered mandrels are great for wide bands. The steel can withstand being pounded by a hammer. Each "step" of the mandrel is one size. This will eliminate any size taper when working on wider bands. The steps range in size from 4 thru 16. Each step is 1 full size large than the previous (eg. 4, 5, 6, etc.).
|
|
|
This aluminum wax mandrel can handle rings sizes 4 to 13. The steps on the mandrel do not taper so the shank of your wax pattern will not taper either. Workable length of mandrel is 10-7/8” long.
|
|
(US)
