7
Small Branch Bender (SPB1)
$0
$13
/Small+Branch+Bender+%28SPB1%29?
|
Description Branch benders, often referred to as levers or branch jacks are used when a trunk or branch must have additional pressure to bend it into a different position. The hooks and jacks are coated with red vinyl plastic to cushion the branch and minimize scuffing. After the lever is in place, tighten the jack screw a little bit every few days until you get the results you are looking for. This branch bender has a fixed spread of 2 1/4 inches and will accommodate a branch diameters of ...
|
|
|
Branch Bender Small 170 Branch benders, often referred to as levers, are used when a trunk or branch, in addition to being wired, must have additional pressure to bend it slowly into a different position. Actually, the bender works as a combination vise-lever, moving the branch or trunk until it reaches the desired position. Our five sizes of branch benders accept maximum branch diameters of 5/8" to 1 1/2". The hooks and jacks are coated with red vinyl plastic to cushion the branch and minimize scuffing...
|
|
|
Small Branch Bender 2.5"x2.5". If you need to take a curve out of you tree or put movement into it, Branch Benders are the way to go. You tighten the jack screw a little each day untill you get the results you are looking for.Hooks and jack are vinyl coated to protect trunks and branches. T-27433
|
|
|
Leave live wood to stay in place for a few months, after which, when this tool is removed, the wood will remain in chosen form.
|
|
|
Kiku Branch Bender and Jack. It is all brass construction with padded contact points and fixed hooks. Only the screw driven fulcrum is adjustable. It has a fixed spread of 2.5 inches (6cm) and will accommodate trunk or branch diameters of .5 inch (1.2cm) or less
|
|
|
Use this small Joshua Roth branch bender (#170) when your Bonsai branches are too large or rigid to be conformed with shaping wire.
|
|
|
The hooks and jacks are coated with red vinyl plastic to cushion the branch and minimize scuffing. Small- 2 1/4 x 2 1/2 (overall WxH) Brass construction
|
|
|
(US)
