4
Safecoat Zero VOC Eggshell Paint (Pure White)
$0
$45
/Safecoat+Zero+VOC+Eggshell+Paint+%28Pure+White%29?
|
Safecoat’s top-of-the-line paints offer durable, long-lasting finishes that look good for years. They use some of the highest quality, most highly refined ingredients available, which eliminate the residual toxic chemicals found in typical paints. They avoid extenders, drying agents, formaldehyde, mildewcides and fungicides. The result is a higher quality resin content - and therefore higher quality paint film than most commercial paints - with none of the unnecessary chemical additives. In addition...
|
|
|
Suggested Use: Surface Preparation: Surfaces should be sanded and cleaned of dirt, grease, mildew and oil. Cleaning with an odorless, dye-free, all-purpose cleaner such as SafeChoice Super Clean is recommended. To achieve an even, consistent eggshell finish, the underlying surface must be evenly sealed. Previously painted surfaces in poor condition need to be scraped and sanded smooth before priming with Safecoat Transitional Primer. Always spot test for adhesion over prior coatings. Before application...
|
|
|
Safecoat’s top-of-the-line paints offer durable, long-lasting finishes that look good for years. They use some of the highest quality, most highly refined ingredients available, which eliminate the residual toxic chemicals found in typical paints. They avoid extenders, drying agents, formaldehyde, mildewcides and fungicides. The result is a higher quality resin content - and therefore higher quality paint film than most commercial paints - with none of the unnecessary chemical additives. In addition...
|
|
|
Premium-quality, zero voc, low-odor, fast-curing enamel paint designed for interior surfaces where a durable, semi-gloss finish with superior hiding properties is needed. Use primarily on walls, ceilings, wood trim, doors, wallboard, primed plaster, plaster board, and colorfast wallpaper. Semi-Gloss tenting is NOT available per the manufactor, please order AFM Cabinet & Trim and Door Enamel). One gallon covers approximately 300 - 350 sq ft in one coat depending on surface porosity.
|
|
|
(US)
