4
Safecoat MexeSeal
$0
$210
/Safecoat+MexeSeal?
|
Use On: Safecoat MexeSeal is recommended on substrates such as the following: limestone, unpolished granite, sandstone, slate, fireclay (brick, tile, terra cotta, pavers), unglazed tile, concrete (brick, tile, precast panels, cast in place). Always test in small, inconspicuous places before full application. Safecoat MexeSeal is generally not suited for polished surfaces. Not recommended for use on modern satillo or quarry tiles without special care. Satillo or quarry tiles generally contain salts...
|
|
|
Safecoat MexeSeal 5 Gallon
Drying/Curing Time : Under normal conditions, Safecoat MexeSeal dries to touch in one hour, is recoatable after two hours and may be opened to traffic after 8-24 hours, depending upon conditions. Normal conditions include a clean, dry surface, access to fresh air flow, a dust free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat MexeSeal to dry and cure more slowly.
|
$209
See 2 Stores
See All Stores
|
|
Safecoat MexeSeal
Safecoat MexeSeal is one of the most durable Safecoat sealers. For porous, unpolished mexican clay tile, stone, granite, slate, concrete and stone pavers, and masonry surfaces where oil and water repellancy are desired. Non hazardous and non-flammable, MexeSeal is a replacement for high solvent content floor sealing systems. Multiple coats will build an attractive gloss finish. Used in retail stores on their pavers, Mexeseal is great for the homeowner who wants a tough but environmentally safe clear...
|
$34
See 4 Stores
See All Stores
|
|
Remove loose or peeling paint and scuff sand the surface (to create surface profile). All surfaces must be clean, sound, dry, and free of any dirt, dust, oil, wax, grease, mildew, mold, and other contaminants and debris. New cementitious surfaces should age at least thirty days and have a pH below 10 before coating. Scrub surface with a solution of SafeChoice® Safety Clean and water. Use 2-6 oz. of SafeChoice® Safety Clean per gallon of water. Triple rinse to assure cleaner is completely removed...
|
|
|
(US)
