6
Safecoat DuroStain - Clear Base
$0
$120
/Safecoat+DuroStain+-+Clear+Base?
|
This premium quality, fast-curing flat finish, semi-transparent stain is ideal for interior and exterior wood surfaces. It promotes penetration of porous surfaces and has high adhesion for superior protection as a decorative colorant. It has excellent pigmentation stability and is a durable stain. It contains no aniline dyestuffs, no gilsonite or asphalt, no aromatic solvents and no formaldehyde. Use on: all wood surfaces.
|
|
|
Premium-quality, low-odor, fast-curing stain and protective coating for interior/exterior wood surfaces. Promotes penetration of porous surfaces, evenly stains and encapsulates the finish, and has high adhesion for superior protection as a decorative colorant. Used on all wood surfaces such as siding, paneling, columns, and solid wood beams. Tech Sheet
|
|
|
A water-based, acrylic stain for interior or exterior wood. Available in seven semitransparent wood tones, plus clear. On wear surfaces, top with an abrasion-resistant finish. Soap and water cleanup. Good UV resistance.
|
|
|
Always have adequate ventilation. Intermix (boxing) all containers of the same color to ensure uniformity before applying. Before using, stir Safecoat DuroStain well, then apply it evenly without reduction using a high quality nylon or synthetic bristle brush. To adjust intensity of color, best results will be obtained by staining six foot sections (2’ x 3’) of the surface and wiping off excess stain while it is still wet to achieve the desired intensity of color. Always keep a wet edge. Darkness...
|
|
|
Suggested Use: Surface Preparation: Surfaces to be stained with Safecoat DuroStain should be sound and cleaned of dirt, dust, grease, wax, silicone, soap and oil, and must be completely free of mold, mildew or similar contamination. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Before application, it is very important to test DuroStain in a small section of the surface to be stained to be sure shade and intensity of color is acceptable. Note...
|
|
|
Always have adequate ventilation. Intermix (boxing) all containers of the same color to ensure uniformity before applying. Before using, stir Safecoat DuroStain well, then apply it evenly without reduction using a high quality nylon or synthetic bristle brush. To adjust intensity of color, best results will be obtained by staining six foot sections (2’ x 3’) of the surface and wiping off excess stain while it is still wet to achieve the desired intensity of color. Always keep a wet edge. Darkness...
|
|
|
(US)
