|
Slide Hammer Puller Kit
This kit provides a wide range of puller applications such as: Flange-type axles oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow Flange Deep Flange Slide Hammer 2 Wa
|
|
|
This kit provides a wide range of puller applications such as: Flange-type axles oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow Flange Deep Flange Slide Hammer 2 Wa
|
|
|
: This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs.Contents:: Shallow Flange: Deep Flange: Slide Hammer: 2 Way Yoke: 3 Way Yoke: Center Bolt and Cone: 3 Pc. Adapter Set: Leg Package with Screws
|
|
|
Provides wide range of puller applications such as: flange type axles, oil seals & other press and fit parts.
|
|
|
Internal puller kit with slide hammer will remove pilot bearings and other bearings that require an internal puller. Includes four separate adapters for multiple applications. Kit is stored in a plastic case with instructions.
|
|
|
Slide hammer. Pro glue gun. 10 sticks of 10" High Glue. 10 sticks of 10" Pro Glue. 2oz. bottle of Release Agent. 2- 1" flat tabs. 2- 1" domed tabs. 2- 3/4" flat tabs. 2- 3/4" domed tabs. 2- 1/2" flat tabs. 2- 1/2" domed tabs. Finishing tool. Plastic razor blade. Carrying Case and Instructions. Made in U.S.A.
|
|
|
This 13 lbs auto dent puller kit has everything you need for pulling dent auto body, removing bearing, pulley and more. Features heat treated steel. The unit includes: 4 standard hooks, return coupler, shaft, chain and hook, screw puller. Also includes 24" slide pole with 1" diameter. Heavy duty blow mold carry case.
|
|
|
The Slide Hammer Kit includes; Slide hammer, 10 each of 16mm, 21mm, 27mm, 32mm tabs, 10 sticks of black glue, 10 sticks yellow glue and 10 sticks of red glue.(Glue gun not included)
|
|
|
Professional slide hammer puller set includes:-5lb heavy duty slide hammer, dent puller, 8 function internal or external 2-jaw/3-jaw puller, seal puller hook, rear axle puller plate, metal boxFeatures:-Eases removal of flange type axles, oil seals, bearings and other press fit parts-Jaws can be set up for 2 or 3 jaw internal or external pulling applications.
|
|
|
Without this tool, nine times out of ten, you will have difficulty removing axle shafts & wheel hubs. This tool will pay for itself at the first use. If you are removing axles for U-joint replacement, you will need this puller to remove your hubs. This is he best method of hub removal. Damage to hub is likely with any other method. Kit includes slide hammer with internal & external puller fingers. Also includes locking pliers adapter, puller hook and dent puller. Sturdy storage case included...
|
|
|
Dent Fix Equipment DF-SK100 Slide Hammer Glue Kit - Paintless Dent Repair
Sometimes you need extra force and this slide hammer glue kit is you ticket. Perfect for pulling dings and dents from steel and aluminum panels. Double walled panels do not present a problem for our Glue Puller. The ultimate tool for PDR Paintless Dent Repair.
|
|
|
BS-1 Thin Hook - Used on light duty applications where a narrow blade is needed. BS-2 Chain Hook - Chain fits around metal parts where a regular hook might slip off or not reach. Can be used with vice grips to pull sheet metal edges. BS-4 Caulking Blade - Used as a straight driver or deep reverse pulling when used with a BS-3 Return Coupler. BS-5 Offset Blade - Malleable and can be used as a driver as well as deep reverse pulling with the BS-3 Return Coupler. BS-7 Shaft - Impact ring is hot formed...
|
|
|
Big 7 lb slide hammer includes multiple attachments to tackle a number of pulling jobs. Kit includes 2/3 jaw internal and external pullers, a rear axle puller, a locking plier adapter, and a hook and dent puller. All items are stored in a plastic case with instructions.
|
|
|
Stiletto 5-Piece Hickory Carpenter's Combo Kit - 2 Hammers, Nail Puller, AirGrip and Bag - CB514H
The Titanium Clawbar Nail Puller with the patented Dimpler creates a recess around the nail head allowing the claws to slide underneath, reducing the chance of chipping the wood. The Clawbar is 5 times stronger than steel but yet lightweight so it won't weight down your tool belt. Lightweight solid titanium. Super strong prying power. Less recoil shock than steel bars. Measures 12" long and weights only 8.5 oz. Two sets of claw tips and strike plate last longer than Steel, no mushrooming, rolling...
|
|
|
Complete with lip puller, screw collet, panel-piercer, and L-tip.
|
|
|
Eight functions: Internal or external 3 jaw puller, internal or external 2 jaw puller, puller hook, rear axle puller, dent puller and special grip wrench adapter.
|
|
|
This is a basic 5 lb. slide hammer. It gives the extra muscle for really stubborn jobs. Which can be a great help! This can attached to any of the pullers.
|
|
|
|
This tool pulls C.V. joints on 1986-current Taurus/Sable. Will also pull other joints having hidden retaining rings. Pry bars can damage expensive aluminum transmission cases, and attempting to do the job by pulling on the axis can damage the roller bearing inside the C.V. joint. With this puller, the axle assembly is popped out of the transaxle without damage, thanks to the straight, even pull provided by the slide hammer. Tool is available with fork only, C.V. joint slide hammer assembly, or...
|
|
(US)
