|
Non-IC 8" Compact Fluorescent Housing - Horizontally Mounted. Emergency Backup models include a pre-installed emergency backup unit which provides 90 minutes of illumination when normal power fails. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. J-Box has 3 port quick connectors. Socket housing attached to top of reflector. Bar hangers...
|
|
|
HID (High Intensity Discharge) - Metal Halide fixtures provide a large amount of light and are particularly effective in areas with high ceilings, such as warehouses and other industrial settings. 4" Architectural HID-Metal Halide Downlight - Vertically Mounted. Eight 1/2" and eight non metallic building wire knockouts and two concentric 1/2", 3/4" knockouts on J-box. Mounting bracket provides up to 5" vertical adjustment, and accommodates 1/2" EMT conduit. Adjustable socket for a variety of lamps...
|
|
|
Royal Pacific, 8105HA Recessed Can Light
IC Airtight 6" Compact Fluorescent Housing - Vertically Mounted 1x13W. Emergency Backup model includes a pre-installed emergency backup unit which provides 90 minutes of illumination when normal power fails. UL and CUL listed for damp location and feed through wiring. 120V normal power factor (NPF) electronic ballast. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. J-Box has 3 port quick connectors...
|
|
|
Royal Pacific, 8109H Recessed Can Light
Non-IC Slope Ceiling Incandescent 6" Housing Designed for sloped ceiling installation from a 2:12 to 6:12 pitch. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. The socket swivels to align the lamp. Bar hangers with built-in nailers for positioning at any point within a 24" joist span. Can be turned 90° on the plaster frame. Designed...
|
|
|
Royal Pacific, 8176H Recessed Can Light
HID (High Intensity Discharge) - Metal Halide fixtures provide a large amount of light and are particularly effective in areas with high ceilings, such as warehouses and other industrial settings. 6" HID-Metal Halide Downlight - Vertically Mounted. Eight 1/2" and eight non metallic building wire knockouts and two concentric 1/2", 3/4" knockouts on J-box. Mounting bracket provides up to 5" vertical adjustment and accommodates 1/2" EMT conduit. Adjustable socket for a variety of lamps. UL and CUL listed...
|
|
|
Non-IC Incandescent 4" Remodel Housing. Small aperture housing designed for accent and task lighting. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts plus 3 port quick connectors. Lamp holder on trims adjusts 30° from horizontal. Adjusts to accommodate various ceiling thickness. Thermally protected against misuse of insulation and improper lamping.
|
|
|
Royal Pacific, 8104HR Recessed Can Light
Non-IC Incandescent Shallow Remodel Housing with 6" Trim size. Designed for use where vertical installation space is limited to 2" x 6 construction. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain relief clamps. Adjustable socket bracket plate. Adjusts to accommodate up to 1" ceiling thickness. Thermally protected against misuse of insulation...
|
|
|
Non-IC Architectural 6" Compact Fluorescent Housing. UL and CUL listed for damp location. C-Channel bracket allows 5" vertical adjustment. J-Box has eight 1/2" knockouts and non metallic building wire knockouts. 120/277 Volt electronic ballast. Thermally protected.
|
|
|
Royal Pacific, 8179H Recessed Can Light
Line Voltage Eight 1/2" and non metallic building wire knockouts and two concentric 1/2", 3/4" knockouts on J-box. Mounting bracket provides up to 5" vertical adjustment and accommodates 1/2" EMT conduit. Adjustable socket for a variety of lamps. Also compatible with (1)250w A23 Med C Incand or (1)150w A21 Med F Incand light bulbs.
|
|
|
IC Airtight Incandescent 4" Housing. Small aperture housing designed for accent and task lighting. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. 3 Port quick connectors pre-installed. Lamp holder on trims adjusts 30° from horizontal. Bar hangers with built-in nailers for positioning at any point within a 24" joist span. Can be turned...
|
|
|
Royal Pacific, 8112HA Recessed Can Light
Super IC Airtight Incandescent 6" Double Wall Housing. UL and CUL listed for damp location and feed through wiring. Double wall to accommodate cellulose blown-in type insulation. IC Rated for direct contact. Thermally protected against improper lamping. J-Box listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Three port quick connectors pre-installed. Adjustable socket bracket plate. Bar hangers with pre...
|
|
|
Royal Pacific, 8149H Recessed Can Light
Non-IC Architectural 9" Compact Fluorescent Housing - Horizontally Mounted. UL and CUL listed for damp location. J-Box has eight 1/2" knockouts and non metallic building wire knockouts. 120/277 Volt electronic ballast. Thermally protected.
|
|
|
6" Non-IC Vertical Housing J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. J-Box has 3 port quick connectors. Socket housing attached to top of reflector. Bar hangers with built-in nailers for positioning at any point within a 24" joist span. Designed to fit T-bar spine without additional clamps. Adjusts to accommodate up to 1.25" ceiling thickness. HPF 120/277 volt electronic ballast for 4-pin...
|
|
|
Royal Pacific, 8222H Recessed Can Light
Non-IC 4" Compact Fluorescent Housing. UL and CUL listed for damp location and feed through wiring. Adjustable socket bracket plate. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts. J-Box has 3 port quick connectors. Bar hangers with built-in nailers for positioning at any point within a 24" joist span. Can be turned 90° on the plaster frame. Designed to fit T-bar spine without additional clamps. Adjusts to accommodate up to 1" ceiling thickness. Thermally...
|
|
|
Royal Pacific, 8313H Recessed Can Light
Non-IC Low Voltage 3" Universal Housing. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts. J-Box has 3 port quick connectors. Lamp-holder on trims adjusts 30° from horizontal. Bar hangers with built-in nailers position at any point within a 24" span, and are designed to fit on T-bar spine without additional clamps. Adjusts to accommodate up to 1" ceiling thickness. Thermally protected against misuse...
|
|
|
Non-IC Incandescent 6" Universal Housing. UL and CUL listed for damp location and feed through wiring. J-Box listed for through-branch circuit wiring (4 in-4 out) with (5) 1/2" knockouts, (4) non metallic building wire knockouts with strain clamps, and (3) port quick connectors pre-installed. Adjustable socket bracket plate. Bar hangers with pre-installed captive nails for positioning at any point within a 24" joist span. Can be turned 90° on the plaster frame. Designed to fit T-bar spine without...
|
|
|
Royal Pacific, 8134H Recessed Can Light
Non-IC 6" Compact Flourescent Housing - Horizontally Mounted. Emergency Backup models include a pre-installed emergency backup unit which provides 90 minutes of illumination when normal power fails. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. J-Box has 3 port quick connectors. Bar hangers for positioning at any point within a 2...
|
|
|
HID (High Intensity Discharge) - Metal Halide fixtures provide a large amount of light and are particularly effective in areas with high ceilings, such as warehouses and other industrial settings. 6" Architectural Horizontal HID-Metal Halide Housing. Eight 1/2" and non metallic building wire knockouts and two concentric 1/2", 3/4" knockouts on J-box. Mounting bracket provides up to 5" vertical adjustment and accommodates 1/2" EMT conduit. Adjustable socket for a variety of lamps. UL and CUL listed...
|
|
|
IC Airtight 4" Housing. Small aperture housing for accent and task lighting. UL and CUL listed for damp location and feed through wiring. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts. 3 Port quick connectors pre-installed. Adjustable socket bracket plate. Bar hangers with pre-installed captive nails position at any point within a 24" span, and can be turned 90° on the plaster frame. Adjusts to accommodate up to 1" ceiling thickness. IC Rated for direct contact...
|
|
|
Non-IC Incandescent 8" Square Housing with Albalite Lens. UL and CUL listed for damp location and feed through wiring. J-Box listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Socket housing installed. Bar hangers with built-in nailers for positioning at any point within a 24" span are designed to fit T-bar spine without additional clamps. Adjusts to accommodate up to 1.25" ceiling thickness. Thermally protected...
|
|
|
Royal Pacific, 8102HAQ Recessed Can Light
IC Airtight Incandescent 6" Quick Install Housing. UL and CUL listed for damp location and feed through wiring. IC Rated for direct contact with non-cellulose insulation. J-Box listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Three port quick connectors pre-installed. Adjustable socket bracket plate (8102HAQ only). Bar hangers with pre-installed captive nails for positioning at any point within a 24" joist...
|
|
|
Royal Pacific, 8103HAQ Recessed Can Light
Super IC Airtight Incandescent 6" Quick Install Housing. UL and CUL listed for damp location and feed through wiring. IC Rated for direct contact with non-cellulose insulation. J-Box listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Three port quick connectors pre-installed. Adjustable socket bracket plate (8103HAQ only). Bar hangers with pre-installed captive nails for positioning at any point within a...
|
|
|
IC Slope Ceiling 6" Remodel Housing. Designed for sloped ceiling installation from a 2:12 to 6:12 pitch. UL and CUL listed for damp location and feed through wiring. IC Rated for direct contact with non-cellulose type insulation. Thermally protected against improper lamping. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. The socket swivels to align the lamp. Adjusts to accommodate up to 1.2...
|
|
|
IC Airtight Remodel 6" Compact Fluorescent Housing - Vertically Mounted. UL and CUL listed for damp location and feed through wiring. 120V normal power factor (NPF) ballast. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Adjusts to accommodate various ceiling thickness. IC Rated for direct contact with non-cellulose type insulation. Meets WA State energy code for restricted airflow requirements...
|
|
|
Royal Pacific, 8110HA Recessed Can Light
IC Slope Ceiling Airtight Incandescent 6" Housing Designed for sloped ceiling installation from a 2:12 to 6:12 pitch. UL and CUL listed for damp location, feed through wiring and direct contact with insulation. J-Box is listed for through-branch circuit wiring (4 in-4 out) with five 1/2" knockouts and four non metallic building wire knockouts with strain clamps. Three port quick connectors pre-installed. The socket swivels to align the lamp. Bar hangers with pre-installed captive nails for positioning...
|
|
(US)
