|
Create perfectly sized polymer clay, metal clay and wire wrapped rings. Work your rings right on the mandrel to maintain correct size and shape. Features easy-to-read white markings, which measure rings from size 1 to 15 by quarter sizes.
|
|
|
Black plastic ring mandrel with white size markings. Sizes rings to size 15. Also used to form wire wrapped rings.
|
|
|
This six piece ring mandrel set is ideal for making PMC rings as well as for the traditional wax worker. The steel mandrel stand can be inverted so that ou can work on rings from two directions. And the mandrel can be removed from the holder for hand held detail work. The mandrel set consists of six aluminum mandrels covering sizes 4 to 15, allowing you to make PMC rings in sizes 2 to 13. This size range allows for the approximate 2 size shrinkage when making rings from PMC.
|
|
|
Heavy duty, 2.45 lbs. ring mandrel. Marked with U.S. standard sizes 16 - 24. Graduated in 1/4" sizes. Use with rings and small bracelets.
|
|
|
Approximately 11 1/2'' overall. Grooved stick with marks 1 - 13
|
|
|
Bezel Mandrels Primarily used to form bezels, these mandrels are also used to shape decorative ornaments, make chain links etc. Made of hardened and tampered steel, approximately 11 long, mandrel portion is 8 (except round 8 length), with 1/2 to 1/8 taper. Made in the USA.
|
|
|
Grooved mandrel is used with stone set rings to prevent the bottom of the stone from touching the mandrel
|
|
|
This is a new graduated ring mandrel. Has sizes 1 to 15 in 1/4 size increments. Calibrated for accuracy. Precision ground to 0.0015". It measures approximately 12 1/2" (31.7 cm) long.
|
|
|
|
|
|
This ring mandrel, wit its stand, enables the user to create rings. Using the mandrel on the stand keeps the work secure, allowing you to use both hands to create.
|
|
|
Ring Mandrel with etched 1-15 Markings. This item is sold per each.
|
|
|
American-made mandrels of case-hardened steel are finely polished. Two styles to fit various requirements of shaping, measuring, and enlarging rings. Sizes 1 to 16
|
|
|
Set of 16 jump ring making mandrels. These metal mandrels are 5" long. Each mandrel is drilled with a hole for inserting wire. Mandrel sizes are 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0 & 12.0mm.
|
|
|
Jump Ring Mandrels - Set of 2. Small and large stainless steel with non-slip PVC handle. Each offers five different diameters. Small: 1.5, 2.5, 3.5, 4.5 and 5mm. Large 6, 7, 8, 9 and 10mm. Nicely rounded and extremely smooth so wire will not be scratched.
|
|
|
This versatile, quality-made aluminum mandrel remains cool so wax designs don’t stick and can be removed from the mandrel without damage. The steel stand leaves your hands free to work on the smooth, graduated mandrel surfaces, which rotate 360°, or you can remove the ring stick entirely. Marked at 30° intervals to index the mandrel into 12 equal segments, the ring stick is ideal for marking the spacing for stone placements or repeating patterns. The indexing feature also holds rings in place for...
|
|
|
This ring mandrel is made of hardened steel. 13.5 inches long (doesn’t include length of knurled handle). Ring sizes 1-16 in ¼ inch increments. Please note: The ring mandrel you receive will have a black handle. [THM-0372].
|
|
|
The graduated ring mandrel is used for shaping, straightening and enlarging rings. It can also be used to hold rings while setting stones. Overall length 12 1/2". Graduated sizes 1 to 15. Made of hardened tool steel.
|
|
|
|
|
|
A new idea for bead and wire artists. Made of stainless steel with a non-slip PVC handle, these mandrels will give the user consistent size loops time after time. This set of two includes a small mandrel, with diamaters of 1.5, 2.5, 3.5, 4.5 and 5mm, while the large offers 6,7,8,9,and 10mm diameters. Nicely rounded and extremely smooth so the wire won't be scratched.
|
|
|
This American-made mandrel of case-hardened steel is finely polished to meet various needs for shaping, measuring and enlarging rings. Great for hardening wire rings using a mallet or hammer. Round shape with half-sizes 1 to 16. 13-1/2" in length.
|
|
|
MD201, Steel Ring Mandrel, by PePe. Preferred mandrel companion piece to MD200. Non Grooved model. See MD200 for complete description. $29.95.
|
|
|
This is the standard jewelers ring mandrel with grooves on the back to protect any gem or delicate settings. Sturdy enough to laugh in the face of ring stretching with a leather mallet!
|
|
|
This essential tool for wireworkers enables you to make perfectly round jump ring coils or rings for fusing. The small wire wrap ring mandrel makes rings in five diameters: 1.4mm, 2.4mm, 3.4mm, 4.4mm, 5mm.
|
|
|
American-made mandrels of case-hardened steel are finely polished. Several sizes and styles to fit various requirements of shaping- measuring and enlarging rings.
|
|
|
This basic wooden ring mandrel is an economical way to make rings. Great for students in classes! Simply take polymer clay and ball into feet. Press ring mandrel down to make a rest for the mandrel so it is elevated. Bake the polymer clay as directed and now you have a great way to make rings!
|
|
(US)
