|
|
|
|
Note: All axles and hubs are NOT warranted against spinning. For best results, we recommend replacing the axle and hub as a kit or upgrading to one-piece axle shafts.
|
|
|
Rear Axle Wheel Stud
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either. [6]
|
|
|
Moser Axles feature the ability to be shortened and resplined if you decide to narrow your rear at a later time. Whether mated to a 31 spline spool or a 31 spline LSD, Moser Engineering's Forged Steel 31 Spline Mustang Axles will help you put your Mustang's power to the road!
|
|
|
|
|
|
Features and Benefits: Axle stud cone pliers. Wt., 13 oz. Now you can easily remove the tapered cone from studs used on medium- and heavy- duty truck rear axles. This specially designed pliers gives you the leverage needed to expand the cone and remove it from the stud for axis removal.
|
|
|
OTC Axle Stud Cone Plier
Now you can easily remove the tapered cone from the studs used on medium- and heavy-duty truck rear axles. This specially designed plier gives you the leverage needed to expand the cone and remove it from the stud for axle removal.
|
|
|
Stud, with serrated shoulder for rear brake drum. 5/8" -18 thread .690" O.D. on serration.
|
|
|
Now you can easily remove the tapered cone from studs used on medium- and heavy- duty truck rear axles. This specially designed pliers gives you the leverage needed to expand the cone and remove it from the stud for axis removal.
|
|
|
The puller will service axles with bolts and studs up to 9/16" diameter. Fits 4-, 5-, or 6-bolt stud circle from 4-1/4" to 5-9/16".
|
|
|
Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 & 4 Speed Transmissions. For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7120) $38.79 [Enlarge Picture]
|
|
|
Rear axle control rod stud, front. Attaches rod to 412 bracket, 2 rqrd.
|
|
|
Moser Axles feature the ability to be shortened and resplined if you decide to narrow your rear at a later time. Whether mated to a 31 spline spool or a 31 spline LSD, Moser Engineering's Forged Steel 31 Spline Mustang Axles will help you put your Mustang's power to the road!
|
|
|
Rear Axle Wheel Stud, 1-1/2" for 1979-1993 Mustang.
|
|
|
Kits include: 1 left axle, 1 right axle, 2 Timken Set-9 bearings, 2 bearing retainers, 2 spacers, 2 inner oil seals, 2 outer oil seals, 10 Studs, silicon seal & c
|
|
|
|
|
|
23 - Wheel Stud, Right Thread, for Dana 44 Tapered Rear Axle for Jeep
Discount Jeep Parts - Lowest Prices, Best Quality - #23 - Wheel Stud, Right Thread, for Dana 44 Tapered Rear Axle for Jeep
|
|
|
|
|
|
Chrysler: Fits most Chrysler rear axles, 1/2 in.-20 thread, 3 in. long, .685 in. knurl diameter, press-in style, quick start dog end, wheel stud set by Moroso. This stud set is manufactured from high-grade SAE 8740 steel to withstand shear loads of 190,000 psi. They are designed expressly for use with thick hub racing wheels for both drag and oval track racing and have quick start dog ends for easier starting of lug nuts.
|
|
|
TA Performance rear-axle bearing cap stud kit is used to help prevent stock cast-iron bearing caps from moving and causing carrier breakage. Kit includes studs, nuts and washers.
|
|
![[20] Wheel Stud, Right Thread (Each) Wrangler W/ Drum Brakes Only, Rear Dana-44 With Flanged Axles](http://i.s.shopwiki.com/i/data/__%5B20%5D+Wheel+Stud%2C+Right+Thread+%28Each%29+Wrangler+W%2F+Drum+Brakes+Only%2C+Rear+Dana-44+With+Flanged+Axles/140x140/10/929/408/aHR0cDovL3d3dy5zaG9wamVlcHBhcnRzLmNvbS9wcm9kdWN0X3RodW1iLnBocD9pbWc9aW1hZ2VzL3JlYXItZGFuYS00NC1mbGFuZ2VkLWF4bGVzLmdpZiZ3PTE4MCZoPTIwMA====.gif)
|
[20] Wheel Stud, Right Thread (Each) Wrangler W/ Drum Brakes Only, Rear Dana-44 With Flanged Axles
Wheel Stud, Right Thread (Each] Wrangler W/ Drum Brakes Only - Rear Dana-44 With Flanged Axles.
|
|
|
Forged steel street/strip axles. Non-tapered with hardened bearing seats and machined c-clip grooves to fit OEM applications. Can be shortened and resplined to fit narrowed rear ends. ABS Compatible. Fits 2005-2010 GT with 31 spline 8.8" rear. Includes Two Axels: One - 31 11/16" in length One - 32 13/16" in length.
|
|
|
Wheel Stud for 70-86 Jeep CJ w/ Rear Dana 44 or AMC 20 Axle. Sold individually.
|
|
|
Stainless Steel Hub Cap for Rear Wheels - 8.5" Axle with Eight 3/4" Studs
|
|
|
Ford 9'' center section. One piece 1/8'' thick triangulated design offers increased strength and weight reduction compared to pieced-together housings. Features 3'' o.d. x 60.75'' wide steel axle tube, drain plug, filler plug, and 1/4'' thick faceplate designed for press-in studs, item #247-9006. TIG welded throughout with the exterior welds ground smooth to eliminate stress risers.
|
|
(US)
![[20] Wheel Stud, Right Thread (Each) CJ Only, Rear Dana-44 With Flanged Axles](http://i.s.shopwiki.com/i/data/__%5B20%5D+Wheel+Stud%2C+Right+Thread+%28Each%29+CJ+Only%2C+Rear+Dana-44+With+Flanged+Axles/140x140/5/535/103/aHR0cDovL3d3dy5zaG9wamVlcHBhcnRzLmNvbS9wcm9kdWN0X3RodW1iLnBocD9pbWc9aW1hZ2VzL3JlYXItYW1jLW1vZGVsLTIwLmdpZiZ3PTIwMCZoPTIwMA====.gif){kind=small}