|
Motion sensor has built-in transmitter Supervised for low battery and sends hourly status signals
|
|
|
Wireless Intelligence Passive Infrared Detector SK-160
This is 100% brand new Wireless Intelligence Passive Infrared Detector. It is made of durable and high material. You can use it for a long time. Good choice for you!
|
|
|
Linear Supervised Passive Infrared Motion Detector Transmitter
|
|
|
Linear Supervised Passive Infrared Motion Detector Transmitter - DXS-54
. Motion sensor has built-in transmitter. Supervised for low battery and sends hourly status signals
|
|
|
Aleph XP Series Passive Infrared Detector
XP-43SL XP43SL Passive Infrared Detector (Wall Mount, Pet Immunity/Tamper/Sensor ADJ/LED)
|
|
|
|
|
|
Pet Immune 30 lbs. 40 x 56.
|
|
|
WS4904 Passive Infrared Motion Detector Multi-level signal processing and specially designed lenses deliver superior intruder detection and reliable long-term operation while minimizing false alarms! 433 MHz wireless Multi-level PIR signal processing+ Dual element low noise sensor High level static and transient protection Excellent RF immunity Temperature compensation LED on / off jumper Sensitivity jumper Super quiet operation Wall, corner, or ceiling mounting Attractive styling for any decor ...
|
|
|
Dual-element pyroelectric sensor. Fully supervised. Tamper switch. Walk test mode. Adjustable pulse count. Transmission delay feature. Retransmission delay. Multiple lens options. Alkaline batteries supplied. 5-Year battery life. SX format. RF frequency: 303.875 MHz. 3.25" (W) x 5.75" (H) x 1.75" (D).
|
|
|
Passive infrared (PIR) sensor technology provides one of the most reliable and cost effective methods for protecting spaces in home or office. PIR detectors trip an alarm when sensory changes in infrared energy levels caused when an intruder moves about the protected area are detected sending an alarm signal to the Main Digital Keypad/Auto-Dialer unit. PIR's emit no energy of their own. These motion sensors merely "see" infrared images. Built-in smart technology senses both heat and movement. Senses...
|
|
|
Aleph XP Series Passive Infrared Detector Motion Detectors
The Aleph XP Series Passive Infrared Detector is loaded with unique innovations which give you reliable detection and freedom from false alarms. Superior white-light and RFI immunity, SMD circuitry, and unique copper-plated circuit board provide outstanding performance and sensitivity. The low-cost XP Series Passive Infrared Detector incorporates a fully tested dual pyroelectric element, jumper electable 2/4 pulse count, and a walk-test LED. This detector is pet-immune up to 30lbs and has a coverage...
|
|
|
Linear Supervised Passive Infrared Motion Detector
This additional Supervised Passive Infrared Motion Detector Transmitter is a battery powered passive infrared motion detector with a built-in transmitter designed for use with the Linear DVS-2400 Security System. Supervised means that the security system keeps track of each sensor. This transmitter can be used in a variety of motion detection applications. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded wireless signal to its companion...
|
|
|
Exceptionally small detector measuring 2.64" x 2.09" x 1.46"(68 mm x 54 mm x 38 mm
|
|
|
This Detector is ideal for Outdoor annunciation, activation, and automation applications.This detectors feature special UV resistant lenses and casings for outdoor use. LX Detectors also feature an easy Pet Alley adjustment, selectable sensitivity and pulse count, extra strong Sunlight & RFI Immunity, built-in photocell, and Form C relay output.
|
|
|
Optex RX-40PI - Pet-Immune Passive Infrared Detector
The "Quad Zone Logic" provides multi segmented detection zones over the detection area. An alarm signal is created by the cumulated total IR energy of each zone. It is designed so that a human size target will normally fill 4 to 8 zones, and this will cause an alarm to be generated. Any smaller temperature change (small to medium size pets, rodents or moving curtains) only activates one or two zones at the same time creating a much weaker detection signal. Pet immunity applies to animals 0 to 16...
|
|
|
Anti-masking with spray detect. Quad element design. Microprocessor controlled self-test supervision systems. Q-map signal processing. Field replaceable pointable mirrored optics. Temperature compensation. Motion Monitor targets.
|
|
|
Based on the Bravo?3D hardwire motion detector. High traffic shutdown. Pet-immunity up to 60 lbs (27 kg). 1 lithium battery included. WLS904L-433 available in Europe.
|
|
|
RFI Protection No alarm at 20V/m from 100MHz to 1GHz. Temperature Protection No alarm during temperature changes from -4°F to +122°F (-20°C to +50°C). Noise Reduction Circuit. Selectable Pulse: 2 or 4. LED On/Off Switch.
|
|
|
|
|
|
Passive Infrared Detector, Low Voltage, Color White, Material ABS Plastic, Length 6 1/4 In, Width 1 1/2 In, Height 1 1/2 In, Operating Temp -20 F to +120 F, Mounting Height 7 to 15 Ft, Coverage Area 20 Ft Width, Coverage Area 15 Ft Length, Coverage 300 Square-Ft, Time Delay Adjustable, Time Delay Up to 60 Sec, Voltage 12VDC or 24VDC, 26mA @12V, For Use With 1RAA4, 1RAA6
|
|
|
DSC Wireless 85 lb Pet-Immune Passive Infrared Detector - WLS914-433
4 programmable function keys. Small compact design. Integrated LED to indicate a transmission occurred. Silk-screen buttons. Optional Belt clip included. Includes optional generic rubber button insert. 433 MHz technology. Uses long life lithium batteries. 3 second delay on panic key to reduce false alarms.
|
|
|
Based on the Bravo 3 hardwire motion detector. Patented MLSP (Multi-Level Signal Processing). Interchangeable lens. Wall-to-wall lens (standard). Curtain lens. Pet-immune lens. Corridor lens. Built-in tamper switch.
|
|
|
Automatically signals SSD Security System console to sound siren when monitored area is entered. Virtually undefeatable once intruder detection pattern is entered. Protects large interior areas, such as hallways, stairs, and other main access routes. Employs passive infrared technology to detect temperature and motion changes. Mounts easily to wall, corner, or wall/ceiling without screws. Automatically armed in AWAY mode/disarmed in HOME mode. Covers 30' x 30' area. Includes alkaline batteries...
|
|
|
The IMS-4861 Passive Infrared Detection Sensor is a dual-element passive infrared intrusion detector for use in electronic security systems. It reduces false alarms by eliminating background noises and nuisance stimuli. The IMS-4861 employs variable pulse-count adjustment, thus making it adaptable for use both inside and outside of server/equipment rooms. It is designed to connect to the IMS-4000 Host or Node. Refer to the manufacturer's instruction guide for more information.
|
|
|
This sensitive PIR detector contains a sophisticated 9 IC circuit and a sensitive PIR sensor. The unit operates from 1 9V battery (not included) and is about 5" x 3" x 2". The unit has a built in transmitter which was to transmit the intruder detection alert at 433MHz (Our kit C6849 picks up this signal). We do provide you with simple directions on how to connect up a relay to this PIR unit to allow you to set off sirens, lights etc. when the unit detects an intruder. This sensitive PIR unit has...
|
|
(US)
