|
Motion Pro Damper Rod Fork Tool
Perfect for disassembly and assembly of most Kayaba and Showa inverted forks in 41, 43, 46 and 47mm. 2 tools in one, one side for Kayaba forks and the other side for Showa forks. Not needed for 91-92 Honda CR models.
|
|
|
Designed to install fork caps on forks with a large amount of spring pre-load. Will work on most 39mm and 41mm Harley-Davidson forks. Reduces risk of damage to fork caps during installation.
|
|
|
Motion Pro Chain Alignment Tool
Allows visual alignment of sprocket for accurate alignment of drive chain and rear wheel.
|
|
|
Motion Pro Combination Fork Damper Tool
Designed to hold the damper rod during assembly and disassembly of Honda XR400s or Suzuki DRZ400s. One end features spanner-type prongs for the XR400 and the other a 27mm hex for the Suzuki.
|
|
|
Motion Pro - Primary Chain Alignment Tool
For aligning the teeth on the clutch shell with the teeth on the motor sprocket
|
|
|
Motion Pro FORK ROD DAMPER TOOL KAYABA/SHOWA INVERTED FORKS IN 41/43/45M 08-0117
Motion Pro FORK ROD DAMPER TOOL KAYABA/SHOWA INVERTED FORKS IN 41/43/45M 08-0117
|
|
|
Use for removal of 1-3/8" hex fork cap nut. 1/2" drive. Thin socket measures only 9/32" deep by 5/8" tall. O-ring insert to help protect the top of the cap from damaging polished surfaces. Sold each. Made in the U.S.A.
|
|
|
Motion Pro Fork Cap Wrench 46 50mm
For removing the fork caps on late model Honda and Suzuki motocrossers. Can be used for removal of a compression stack on late model RM125,250. One end is 46mm and the other is 50mm.
|
|
|
|
|
|
Motion Pro Fork Cap Wrench
This quality tool from Motion Pro is designed to remove the fork cap
|
|
|
Motion Pro Fork Bleeder Kit
Release built-up air pressure in forks of late-model MX bikes. Push-button operation -no tools. Required drilling, tapping & end milling. Includes 2 Pro Bleeder valves, 5/16-32 tap, 9/32 drill bit, washers & instructions.
|
|
|
Motion Pro Fork Compression Valve Removal Tool
* Replaces Yamaha OEM YM-01500 * For removing the compression valve from cartridge * 19mm drive hex / 36mm octagon * Manufactured out of billet 6061 T-6 aluminum Applications: * Yamaha: YZ 125/250 05-06, YZ 250F/450F 06
|
|
|
Motion Pro Fork Seal Drivers
Designed for easy installation of most fork seals on either conventional or inverted forks. Manufactured from plated carbon steel, split design with weighted body. Sold each.
|
|
|
Motion Pro Fork Seal Drivers 46/47mm combo
Designed for easy installation of most fork seals on either conventional or inverted forks in 35mm thru 50mm configurations.
|
|
|
Motion Pro Damping Rod Bleed Tool
* Tool allows for effortless retrieval of damping rod after spring installation. * Perfect for working on Kayaba, Showa and WP inverted forks. * Packaging includes tube for convenient tool storage.
|
|
(US)
