|
Rugged Ridge Mud & Shine Stainless Steel Light Bar for 1997-02 Wrangler Replaces part number: Outland 7481, 12110.53
|
|
|
Bolt on driving lights or Off-road lights to your JK or TJ with minimal drilling required. Llight bar only (Lights are not included). Instructions and hardware included.
|
|
|
|
|
|
All of these lights feature a hermetically sealed (waterproof) design and high-tempered glass resistant to substantial temperature drops that can occur when lights are immersed in water.
|
|
|
The clean, unobtrusive design of the Maxi Light Bar is engineered to off set the lights positioning them forward of the windshield in an effort to eliminate windshield glare.
|
|
|
This cool tubular light bar is constructed with heavy gauge 3 inch tubing. The mounting brackets are laser cut and formed from 10 gauge material to ensure accurate easy mounting. MBRP bar comes with two mounting tabs and will hold up to 8" dia lights . The light bar is pre-drilled to allow for internal wiring of lights. The bumper does not have to be removed for installation. This is a "no drill" install that takes 30 minutes using common hand tools.
|
|
|
|
|
|
ORI Baja Eliminator Light Bars are designed with the west coast pre-run look in mind. With a more aggressive off road look its race design main tube extends to the end of the OEM front bumper. Off Road Innovations light hoops are made specifically for your vehicle type and not one hoop fits all.
|
|
|
Install this flexible replacement Trac Bar in the front of your YJ, in place of the stock unit. This DoubleJointed Trac Bar features Rod Ends in place of stiff rubber bushings, and has left and right threads for length adjustably. It allows for greater articulation and controls side to side movement better then the stock Trac Bar.
|
|
|
|
For lighting up the night, a light bar, with two mounting tabs, can be easily added to the Trans4mer system. Or if your application has space limitations, choose Warn's special "L" brackets to mount lights from the sides of Grille Guard, available elsewhere in our online catalog.
|
|
|
|
|
|
Rampage has came up with a great way to add up to four 8" Lights on the front of your vehicle. The Rampage Dakar light bar is Custom fit to vehicle contour and available in Polished Stainless Steel. Includes No-Drill mounting kit for easy instalation. Lights Sold Seperate.
|
|
|
KC HiLites has developed the perfect lighting accessory. An attractive alternative to bulky bumpers and grille guards, the sleek new front end Light Bars from KC HiLites are made in the USA and feature a great-looking, black powdercoat finish. The KC Light Bars are made from 1-1/2” OD, .095 wall steel tubing and come with light tabs for mounting up to four KC lights. Each bar simply bolts on to the frame using the factory bolts for a quick and easy installation.
|
|
|
Description: The latest innovation in mirrors! LEDs on the back of the mirror housing arm light up when you engage your turn signals. (Simply wire into your signals.) Great replacements for cracked mirrors. On-coming traffic will take notice when you are turning-providing you with an added measure of safety.
|
|
|
Jeep Deluxe Light Bar in CARR's new XP4 Xtreme Titanium Silver Powder Coat finish features a lightly textured matte finish that resists scratching, peeling and fading.
|
|
|
Each application is designed to compliment other N-Fab products such as Nerf Steps, Desert-Runners, Rear-Runners, and Bed-Runners, for that much-desired Baja race truck look. All of N-Fab full-size Pre-Runners are made to house up to four 8-inch front racing lights for a wide off-road race inspired light pattern. Because of our innovative construction, N-Fab Pre-Runners require no brackets for installation on most of our models. A simple supplied bolt kit is all that is necessary. There are no...
|
|
|
Maybe you’re like a lot of other people out there who needs to buy Rock Slider Side Bars for their Jeep Wrangler YJ but just didn’t know where to look. Well look no further because we here at Morris 4x4 Center has anything any Jeep owner could want. Get the exact part you need to fit perfectly. After shopping once at Morris 4x4 Center, you can feel comfortable that you came to right place with our wide selection and low prices!
|
|
|
|
|
|
It works very much like a bicycle seat post into the frame, with a slot in the tube and a clamp. Simply, the best of both worlds. Tests have shown up to 31% increase in ramp travel index (RTI) on stock vehicles. Equipped with a grease zerk to lubed it, and a dust boot to keep the grime out.
|
|
|
Jeep Light Glare Shields are an Optional accessory for KC HiLITES Windshield Mount Light Brackets for Jeeps. The Light Shield helps guard against unwanted glare. Designed to fit all KC 6" round lights. They feature an attractive non-glare satin black powder coated finish. These shields are intended for use on windshield frame or roof mounted lights to reduce glare reflected off the hood of vehicles.
|
|
|
Knight Guard Nerf Bars For 1987-95 Jeep Wrangler YJ
Note: Each bar is pre-slotted with holes for adding the complimentary Knight Guard Step (2 slots on each side fits one step on each side). Steps sold separately. Minimal drilling is required to complete the installation. JK Unlimited has front door step slots only.
|
|
|
State of the art technology and an eye for emerging customer needs have also earned IPF a reputation for innovation. For example, IPF and ARB have been instrumental in introducing Halogen Infra Red (HIR) technology to the automotive aftermarket. By applying a special reflective coating to the inner surface of the HIR globe, visible light can pass through while infra red light reflects back on to the filament. This recycling effect superheats the filament, and produces a light so intense it is only...
|
|
|
This versatile mounting bar can be used to mount auxiliary lights, Hi-Lift jacks and numerous other types of off-road gear. Use as a bumper under rider by mounting under the bumper providing protection of the steering box. Bolts into existing bumper mounting holes--no drilling required on 1997-2006 model Wranglers and does not interfere with tow hooks. Older model Wranglers require drilling to install. Made from 1 1/2 x .065 wall round steel tubing, easily mounts to pre-existing mounting holes. Comes...
|
|
|
Rugged Ridge has engineered a durable and easy to install light bar that allows you to add auxiliary lighting to your factory Wrangler bumper. The light bar bolts to existing mounting holes and installs easily without cutting, drilling, or removing the bumper. With a few simple hand tools you will be able to install your light bar and mount up to three lights on your Jeep while retaining your factory bumper.
|
|
|
*Tire Size (2 modes: 24-38.75” and 39-53.75"). *Gear Ratio. *One Touch Lane Change. *Daytime Running Lamps (Low Beam, Fog Light, or Turn Signal location options). *Low Tire Pressure Indicator. *Automatic Smart Bar (ASBS) Indicator Disable (after Smart Bar removal). *Clear Diagnostic Trouble Codes.
|
|
(US)
