|
Johnny Joint® Control Arms by Currie Enterprises
Complete set of 8 Johnny Joint® Control Arms. All arms are fully adjustable allowing the pinion angle and caster angle to be adjusted. This adjustable feature allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. The lower arms are made of 1 1/4" heavy wall D.O.M. tubing, and the upper arms of 1" heavy wall D.O.M tubing. All arms are powder coated gold, and come with zerk fitted grade 8 mounting bolts. To allow complete unrestricted...
|
|
|
Johnny Joint® Rear Upper Control Arms by Currie Enterprises
All Currie Enterprise items on this website are warranties to be free from defects in materials and workmanship prior to installation. Any alteration or improper use will void this warranty. Because all parts which we sell are intended for use in heavy duty applications, it is not possible to warranty or guarantee the performance of any items. Further, we disclaim any liability for action resulting from failure or parts durability. We disclaim any express or implied warranties. Our products may be...
|
|
|
Johnny Joint® lower control arms may be used front or rear on all TJ/LJ vehicles, and on the front of TJ/LJ/XJ/MJ vehicles. The arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1 1/4" heavy wall D.O.M. tubing and feature the Johnny Joint® on both ends of the arms. Sold as a pair.
|
|
|
Rear Upper Johnny Joint Control Arms For 1997-06 Jeep Wrangler And Unlimited
For 1997-2006 Jeep TJ's and Unlimited's. The Johnny Joint® rear upper control arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1" heavy wall D.O.M. tubing and feature the Johnny Joint® on both ends of the arms.
|
|
|
Currie Complete Set of 8 Johnny Joint Control Arms Jeep JK Wrang
This is our complete set of all 8 Johnny Joint® adjustable length control arms for the '07 & up Jeep JK Wrangler. All arms feature heavy tubular steel construction and Johnny Joint® rod ends on both ends. Johnny Joint rod ends offer 30 degrees of overall travel, are urethane bushed, and are fully rebuildable!
|
$1,159-$1,168
See 2 Stores
|
|
Currie Enterprises Rear Upper Control Arms
These are the adjustable length Johnny Joint® rear upper control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating. Sold as a pair of arms.
|
|
|
Currie Enterprises Front Upper Control Arms
These are the adjustable length Johnny Joint® front upper control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing, feature the 2" Johnny Joint® rod end on one end, and a formed steel fork and jam nut on the other end. New grade 8 bolts are furnished for the frame end of the arms, while the housing end retains the factory hardware. Arms and ends are finished in semi-gloss black powder coat. Sold as a pair of arms.
|
|
|
Currie Enterprises Front Lower Control Arms
These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1 1/4" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating. Sold as a pair of arms.
|
|
|
For 1997-2006 Jeep TJ's and Unlimiteds, as well as all years of XJ's and MJ's. The Johnny Joint® front upper control arms are fully adjustable so that you are able to adjust your pinion angle and caster angle after a lift is installed. The arms are fabricated out of 1" heavy wall D.O.M. tubing and feature the Johnny Joint® on the frame ends of the arms only. The opposite end connects to the stock bushing on the front end housing - or you can replace these stock front end bushings with our CE-910...
|
|
|
Currie Enterprises Rear Lower Control Arms
These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1 1/4" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating. Sold as a pair of arms.
|
|
|
Specs: The Johnny Joint lower control arms are fully adjustable allowing the pinion angle and caster to be adjusted while bolted in the vehicle. The arms are made of 1-1/4" heavy wall DOM tubing, zinc plated and come with zerk fitting and grade 8 mounting bolts. To allow complete unrestricted movement, the Johnny Joint is used at both ends of the lower arms.
|
|
|
Currie Lower Johnny Joint Control Arms, TJ/XJ/ZJ
The Johnny Joint® lower control arms may be used front or rear on all TJ/LJ vehicles, and on the front of TJ/LJ/XJ/MJ vehicles. The arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1 1/4" heavy wall D.O.M. tubing and feature the Johnny Joint® on both ends of the arms. Sold as a pair.
|
|
|
Specs: The Johnny Joint lower control arms are fully adjustable allowing the pinion angle and caster to be adjusted while bolted in the vehicle. The arms are made of 1-1/4" heavy wall DOM tubing, zinc plated and come with zerk fitting and grade 8 mounting bolts. The Johnny Joint upper control arms are fully adjustable 1" heavy wall DOM tubing. To allow complete unrestricted movement, the Johnny Joint is used at both ends of the rear arms, front lowers, and on one end of the front uppers.
|
|
|
The Johnny Joint Lower Control Arms are fully adjustable. The pinion angle and caster can be adjusted. This adjustable feature allows your vehicle to be upgraded without replacing the control arms. The arms are made of 11/4" heavy wall D.O.M. tubing, zinc plated and come with zerk fitting and grade 8 mounting bolts. The Johnny Joint Upper Control Arms are fully adjustable 1" heavy wall D.O.M. tubing. To allow complete unrestricted movement, the Johnny Joint is used at both ends of the rear arms,...
|
|
|
Complete Johnny Joint Control Arm Set For 1997-06 Jeep Wrangler And Unlimited
For 1997-2006 Jeep TJ's and LJ's. This is the complete set of 8 Johnny Joint® Control Arms. All arms are fully adjustable allowing the pinion angle and caster angle to be adjusted. This adjustable feature allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. The lower arms are made of 1 1/4" heavy wall D.O.M. tubing, and the upper arms of 1" heavy wall D.O.M tubing. All arms are powder coated gold, and come with zerk fitted grade 8...
|
|
|
This is the 2 1/2" Johnny Joinr® rod end used in our CE-5964U and CE-5964UP '59-'64 Chevy full size and Impala upper control arm applications with a 5/8" thru bolt hole. The Johnny Joinr® portion is fully assembled, is fitted with a zerk fitting for external greasing, and features 1 3/8" of 1"-14 female RH threads welded on. Finished in semi-gloss black powder coat. Sold each.
|
|
|
This is the 2 1/2" Johnny Joinr® rod end used in our CE-7005C Fox Body Ford / Mustang upper control arm applications with a .470" thru hole. The Johnny Joinr® portion is fully assembled, is fitted with a zerk fitting for external greasing, and features 1 3/8" of 1"-14 RH threads welded on. Finished in semi-gloss black powder coat. Sold each.
|
|
(US)
