|
Save money with this 4 pack of 120 volt AC operated ionization smoke alarms with battery backup! Universal Security smoke and carbon monoxide alarms are easy to install. For maximum protection, install smoke alarms and carbon monoxide alarms in every sleeping room, and on every level of your home. Photoelectric smoke alarms are generally more effective at detecting slow, smoldering fires - fires which smolder for hours before bursting into flame. Sources of these fires may include cigarettes...
|
|
|
The new Firex/Kidde i5000 is a 120V AC hardwire ionization smoke detector with 9V battery back-up for single or multiple station use. Smart Hush Control allows user to quiet a nuisance alarm for up to 8 minutes. Power On indicator is lit green when operating on AC power. Interconnectable with up to 12 Firex AC/DC smoke alarms. Red LED indicates which detector has sensed smoke. UL Listed. Ten year limited factory warranty. NOTE: The Firex/Kidde i5000 is the replacement for the original Firex 5000, but the mounting...
|
|
|
Kidde 0910 Ionization Smoke Alarm
LED RED LIGHT FLASHES WITH 4 MODES OF OPERATION: STANDBY, ALARM MODE, HUSH MODE & MEMORY SET. TEST/RESET BUTTON TESTS UNITS ELECTRONIC CIRCUITRY, HORN & BATTERY FUNCTION & RESETS ITS MEMORY AFTER AN ALARMING CONDITION OCCURS. HUSH MODE TEMPORARILY SILENCES NUISANCE ALARMS. BATTERY OPERATED. NO WIRING NEEDED. SEALED-IN LI-ION BATTERIES. UNIT WILL CONTINUE TO OPERATE FOR 10 YEARS.
|
|
|
The Firex ionization smoke alarms are ideal for fast moving, flaming fires. Ionization-type smoke alarms work because there is a small amount of radioactive material between two electronically charged plates which causes current to flow between the plates. When smoke enters the chamber, it disrupts the flow of ions, thus reducing the flow of current and activating the alarm.
|
|
|
Model USI-1209 Smoke and Fire Alarm 120 Volt AC Powered. Battery Pull-Tab activates battery and reduces installation time. 9V battery back-up in event of AC power failure. Super Heavy Duty Battery included. Full dust and contaminant cover protects the smoke alarm from spray applications, thereby eliminating the need to remove the alarm during home construction. Ideal for replacement of most existing smoke alarms. Interconnectable up to 18 units, when unit goes into alarm, all interconnected units...
|
|
|
Kidde i12020 120VAC Ionization Smoke Alarm
The Kidde i12020 is an AC powered, ionization smoke alarm that operates on a 120V power source. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The i12020 includes a quick connect wiring harness for...
|
|
|
Power Source: 9V Battery. Sensor: Ionization. Audio Alarm: 85dB at 10 ft. Temperature Range: 40°F to 100°F. Humidity Range: 5%-95% relative humidity. Size: 5" Diameter x 1.75" Depth. Weight: .5 lb. Interconnect: No. LED: Red, Normal. Digital Display: No. Warranty: 5 year limited.
|
|
|
General-use, battery-powered smoke alarm with flashing indicator assures alarm is receiving power. Tamper-resistant locking pin and LED low-battery indicator. Uses 9V battery (included). Manufacturer�s five-year limited warranty.
|
|
|
Flashing red L.E.D. indicates alarm is operating properly. Green L.E.D. power on indicator. Interconnect units of the same model: 24-unit multiple station interconnect with originating alarm indicator. Ionization chamber responds quickly to low-smoke flaming fires. Test button checks horn and alarm circuitry. AC quick-connect power harness. Loud, piercing, pulsating 85db horn. Special twist-off trim ring for fast installation. U.L.-listed. Temper-proof locking pin to deter theft. 5-year...
|
|
![Canada's Parts Pros [Electrical -> Smoke Alarms -> Ionization Smoke Alarms Wireless] - Browse](http://i.s.shopwiki.com/i/data/__Canada%27s+Parts+Pros+%5BElectrical+-%3E+Smoke+Alarms+-%3E+Ionization+Smoke+Alarms+Wireless%5D+-+Browse/140x140/7/337/484/aHR0cDovL3d3dy5hbXJlc3VwcGx5LmNvbS9pbWFnZXMvc2t1LzE1MC9QYXJ0SW1hZ2U5Mzg4MDA0MTczNjE0OTc2OTM4Mzk5NC5qcGc===.jpg)
|
|
|
|
QUICK DRAWTM - convenient pull-out drawer for easy battery replacement. Dust Cover - full dust and contaminant cover. Battery Pull-Tab - activates battery and reduces installation time. Super Heavy Duty Battery Included. Silencer Feature - convenient silencer button with automatic reset allows you to temporarily override alarm - ideal for cooking smoke and fireplaces - eliminates nuisance alarms. Dual Ionization Sensor. 30 Day Low Battery Audible Indicator. Test Button. For Product Information...
|
|
|
Unit Number: 1235E. UPC: 0-25417-12351-7. Power Source: 120VAC. Sensor: Ionization. Audio Alarm: 85dB at 10ft. Temperature Range: 40°F (4.4°C) to 100°F (37.8°C). Humidity Range: 5%-95% relative humidity (RH). Size: 5.6” in diameter x 1.55” depth. Weight: .6lbs. Interconnects: Up to 24 Kidde devices. LED: Green, receiving ac power. Red, alarm mode. Manufacturer’s Warranty: 5 year limited.
|
|
|
Model Number: 0915E. Power Source: 9V Battery. Sensor: Ionization. Audio Alarm: 85dB at 10 ft. Temperature Range: 40°F to 100°F. Humidity Range: 5%-95% relative humidity. Size: 5" diameter x 1.75" depth. Weight: .5 lb. Interconnect: No. LED: Red, Normal. Digital Display: No. Warranty: 5 year limited.
|
|
|
Battery powered, 9 volt battery included. Dual-ionization AND photoelectric technology for earliest detection of both "fast flaming" and "slow smoldering" fires. Ideal for any location. Alarm and power test button. Operating LED. Low battery warning. Battery removal indicator. Easy installation, mounting hardware included. 10 Year Limited Warranty (battery excluded). Meets applicable standards.
|
|
|
General use battery powered smoke alarm with flashing indicator assures alarm is receiving power. Tamper-resistant locking pin and LED low battery indicator. Uses 9V battery (included). Five-year limited warranty.
|
|
|
Interconnectable - Interconnect up to 24 Kidde devices (of which 18 can be initiating) on one wiring network
|
|
|
120V AC Wire-In Capability. When any one interconnected alarm is triggered by smoke or heat, all interconnected alarms within the building sound an immediate warning. The most immediate and complete system available.
|
|
|
The Fire Sentry 0914E smoke alarm is a battery operated smoke alarm utilizing ionization sensing technology (good for detecting smoldering fires). The four inch diameter gives it a discreet design. The 0914E is powered by a 9V battery (included), providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended. Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year...
|
|
|
Long-Life Ionization Smoke Alarm
Pulsating 85-decibel alarm. Hush® button silences false alarms caused by cooking, fireplaces or cigarettes; alarm resets automatically after seven minutes. Hush® system override when dense smoke is detected. Includes flashing red power light, low-battery indicator, tamper-resistant locking pin and easy twist-off mounting bracket. Ten-year lithium battery included. Manufacturer's limited ten-year warranty.
|
|
|
General-use battery-powered smoke alarm with flashing indicator assures alarm is receiving power. Tamper-resistant locking pin and LED low-battery indicator. Uses 9V battery (included). Manufacturer's limited five-year warranty.
|
|
|
Kidde Battery Powered Ionization Smoke Alarm
* Dimensions: 5" Diam. x 1-1/2" Width. * Power Source: 9V Battery (included). * Audio Alarm: 85dB at 10ft. * Temperature Range: 40°F to 100°F (4°C to 38°C). * Humidity Range: 5%-95% relative humidity (RH). * Sensor: Ionization. * Size: 5" in diameter x 1.75" depth. * Interconnects: No. * LED: Red, normal operation.
|
|
|
Includes 10-year LITHIUM Battery. Battery backup in event of AC power failure. Silencer Feature - convenient silencer button with automatic reset allows you to temporarily override alarm - ideal for cooking smoke and fireplaces - eliminates nuisance alarms. Dual Ionization Sensor. Ideal for replacement of most existing smoke alarms. Smart Interconnectable up to 18 units (with 12 smoke alarms maximum) - when unit goes into alarm mode, all interconnected units sound their alarms. Originating...
|
|
|
Smart Interconnect Wire - Allows the SPI 37 to be connected to additional smoke alarms and CO detectors on a single interconnect wire, eliminating the need for additional wiring. Quick Connect Wiring Harness - Makes it easy and quick to upgrade existing alarms with SPI 37 or move alarms in the residence. The unit shares the standard Firex AC/DC mounting brackets and wire harness. Pre-installed batteries and the exclusive Powerlink Tab™ - Keeps batteries fully charged until the residence is occupied...
|
|
|
Pulsating 85 decibel alarm. Hush® button silences false alarms caused by cooking, fireplaces or cigarettes; alarm resets automatically after seven minutes. Hush® system override when dense smoke is detected. Includes flashing red power light, low-battery indicator, tamper-resistant locking pin and easy twist-off mounting bracket. Ten-year lithium battery included. Manufacturer's limited ten-year warranty.
|
|
|
First Alert Dual Sensor Photoelectric & Ionization technology Smoke & Fire Alarm, Model #SA302CN2
Battery operated dual ionization and photoelectric sensor smoke alarm offers maximum protection from both primary types of fires: flaming and smoldering. Remote mute silences nuisance alarms from cooking smoke or shower steam by pressing any button on a standard household remote control (remote not included). Single button also tests alarm functions. Easy access battery drawer: no need to remove alarm from ceiling to change battery. 10-year limited warranty. Meets UL standards.
|
|
(US)
