|
Boot puller has an angled nose for easier access to spark plug wire boot. Nylon insulating tips and vinyl grip handles.
|
|
|
Insulated Spark Plug Boot Puller has an angled nose for easier access to boots
|
|
|
|
|
|
Swivel design for any angle of approach which allows the use of a lever block to pop the spark plug boot off.
|
|
|
Spark Plug Boot Puller
The T-handle will give you all the pulling power needed to remove and replace even the toughest spark plug boot.
|
$2
See 2 Stores
See All Stores
|
|
The VW and Audi Steel Spark Plug Boots Are Designed to Seal and Increase Contact Between the Spark Plug and Spark Plug Wire. With the Increased Seal and Location of the Boot, a Special Tool Has Been Developed to Access and Remove the Spark Plug Boot. The Tool is Also Needed in Snapping the Spark Plug Boot Onto the Spark Plug that is in a Very Confined Area. THis Spark Plug Boot Tool Was Designed in Hardened Stainless Steel for Long Term Service for the Professional Technician. The T Handle Gives...
|
|
|
This unique specialty tool has been designed to easily remove “ripped” and “stuck on” spark plug boots where there is no access to grab the boot for removal. In usage, this tool goes down in the confined space of the spark plug hole and with hand pressure separates the stuck on piece of rubber boot from the porcelain part of the plug. This spark plug boot tool then slides out with the damaged boot leaving the spark plug exposed and easily removed. Made from quality heat treated steel, this tool...
|
|
|
Overall length: 9 3/4". Vinyl coated jaws and handles assure gripping ability. Use only on automotive-type ignition systems.
|
|
|
Schley Products 65350. SCH65350. SCH-65350. SCH 65350.
|
|
|
WESTWARD 2GKR9 Spark Plug Boot Puller Length 5 3/4 In Works with All Gasoline Engines For Use With Spark Plugs Material Carbon Steel
|
|
|
Long reach to grab down to the bottom of the spark plug boot. Tips have a gripping ledge to go under the spark plug boot. Tips have a vertical ribs to grip the spark plug boot to help break it loose. Swivel design for any angle of approach which allows the use of a lever block to pop the spark plug boot off. This tool works on all types of vehicles.
|
|
|
S-K GrabbersT feature SureGripr tips that allow you tobreak loose rubber or metal boots from plugs with just a twist of the wrist.
|
|
|
Overall length: 9 3/4". Vinyl coated jaws and handles assure gripping ability. Use only on automotive-type ignition systems. Straight jaws access spark plug boots where the offset jaws cannot perform.
|
|
|
Features SureGrip tips that allow you to break loose rubber or metal boots from plugs with just a twist of the wrist. With 9" short handle and spring loaded design this tool offers one-handed operation.
|
|
|
SureGrip tips that allow you to break loose rubber or metal boots from plugs with just a twist of the wrist.
|
|
|
This unique specialty tool has been designed to easily remove ripped and stuck on spark plug boots where there is no access to grab the boot for removal. In usage, this tool goes down in the confined space of the spark plug hole and with hand pressure separates the stuck on piece of rubber boot from the porcelain part of the plug. This spark plug boot tool then slides out with the damaged boot leaving the spark plug exposed and easily removed. Made from quality heat treated steel, this tool comes...
|
|
(US)
