|
Hidden Hitch Class III Trailer Hitch Receivers feature black rust resistant coating and have a 2 receiver opening. It has a low profile design to compliment the rear contours and aerodynamic styling of modern vehicles. This square tube hitch supports up to 3500 pounds of gross trailer weight and 300 pounds of tongue weight. Upon adding a weight distribution system, the towing capacity can be increased to 5000 pounds of trailer weight and 500 pounds of tongue weight. These trailer hitches come with necessary...
|
|
|
Hidden Hitch Round Tube Class III Trailer Hitch
Quite simply, Receiver Hitches are the only way to go for a Jeep®. Since Jeeps® have a high-mounted chassis, most drawbar style hitches do not line up correctly with the trailer coupler. And since no two trailers seem to have the same optimum hitch height, you need flexibility. Receiver hitches allow you to use a ball mount that drops or rises to the correct hitch height when towing. Bolt-on kits include all installation instructions. 100% coverage of a patented finish prevents corrosion.
|
|
|
Hidden Hitch Class III Trailer Hitches have a low profile design to compliment the contours and aerodynamic styling of present day vehicles.These hitches are custom fitted to the vehicle for easy installation. This square tube hitch with 2" receiver opening supports up to 5,000 pounds of maximum trailer weight. These hitches also support 500 pounds of maximum tongue weight. These trailer hitches come with necessary mounting hardware and clear instructions required for installation.
|
|
|
Hidden Hitch Class III Roll Pan Style Trailer Hitch This hitch fits the following vehicles: Chev/GMC - pickup, full size - new body style Sierra/Silverado 1500 and 2500 REG duty FS (1999-2006) Chev/GMC - pickup, full size - new body - with Sir Michael's Roll Pan (1999-2002) Hitch will work the with the style of roll pan bumper shown above. Tech Tips: No drilling required Roll pan requires cutting - Hitch comes through license plate P245/75-R16 and P265/R16 spare tires on 6-1/2' box models must...
|
|
|
Weight Rating: Weight Carrying: 350/3500 lbs.(TW/GTW) Weight Distributing: 500/5000 lbs.(TW/GTW)
|
|
|
87424 - Hidden Hitch - Class III & IV Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 350 lbs. WC Carrying Weight: 3,500 lbs. WD Tongue Weight: 400 lbs. WD Carrying Weight: 4,000 lbs.
|
|
|
Hidden Hitch Class III Roll Pan Style Trailer Hitch This hitch fits the following vehicle applications with OEM Roll Pan: Chev/GMC - S-10, S-15 and Sonoma pickup - with roll pan bumper (1983-1984) Chev/GMC - S-10, S-15 and Sonoma pickup - with roll pan bumper (1985-1997) Chev/GMC - S-10, S-15 and Sonoma pickup - with roll pan bumper (1998-2004) Isuzu - Hombre pickup - with roll pan bumper (1996-1997) Note: 1994-2000 Chevy/GMC S-10, S-15, and Sonoma trucks may have a rear close-out panel. A close...
|
|
|
Hidden Hitch Class III Trailer Hitches have a low profile design to compliment the contours and aerodynamic styling of present day vehicles.These hitches are custom fitted to the vehicle for easy installation. This square tube hitch with 2" receiver opening supports up to 5,000 pounds of maximum trailer weight. These hitches also support 500 pounds of maximum tongue weight. If a weight distribution system is added the towing capacity goes up to 7,500 pounds of gross trailer weight and 750 pounds of maximum tongue...
|
|
|
Hidden Hitch Class III Trailer Hitches have a low profile design to compliment the contours and aerodynamic styling of present day vehicles.These hitches are custom fitted to the vehicle for easy installation. This square tube hitch with 2" receiver opening supports up to 6000 pounds of maximum trailer weight. These hitches also support 600 pounds of maximum tongue weight. If a weight distribution system is added the towing capacity goes up to 10,000 pounds of gross trailer weight and 1000 pounds of maximum...
|
|
|
|
|
|
87451 - Hidden Hitch - Class III & IV Max-Frame Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 400 lbs. WC Carrying Weight: 4,000 lbs. WD Tongue Weight: 500 lbs. WD Carrying Weight: 5,000 lbs.
|
|
|
CLASS III AND IV ROUND-TUBE RECEIVER HITCH Look more "at home" on your aerodynamic vehicle than boxy square-tube hitches! Limited lifetime warranty Made for years of safe, dependable towing. Innovative round tubing follows the rear contours of today's vehicle better than a square-tube hitchlooks better, too, because it hides almost all of the receiver. V-5 ratedmeet or exceed SAE specifications. Heavy-duty 2-1/2" diam. steel tubing. Rust-resistant composite finish exceeds 500-hour spray testthat's equal to 5 hard winters. Bolt to framehardware included. No drilling required unless specified. Accept 2" square ball mounts in a variety of lengths, drops and rises to level trailer tongue. Note: Do not exceed manufacturer's rated towing capacity of towing vehicle. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiri
|
|
|
|
|
|
87668 - Hidden Hitch - Class III & IV Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 300 lbs. WC Carrying Weight: 3,500 lbs. WD Tongue Weight: 500 lbs. WD Carrying Weight: 5,000 lbs.
|
|
|
Hidden-Hitch Class 4 Frame Receiver Hitches | Trailer Hitches | Hidden Hitch
Hidden Hitch Class 4 Ultra Frame Receiver Hitches feature a 2" square receiver tube opening and are designed for full size pickup trucks, vans and sport utility vehicles with full frames and heavy duty suspensions. Rated up to 12,000 lbs WC / 1,200 lb TW - 14,000 lbs / 1,400 lbs WD. Ideal for marine and commericial use. Strong, secure heavy duty bracket design with an all frame attachment. J-pin ready and feature a premium black powder coated finish.
|
|
|
Weight Rating: Weight Carrying: 350/3500 lbs.(TW/GTW) Weight Distributing: 500/5000 lbs.(TW/GTW)
|
|
|
87421 - Hidden Hitch - Class III & IV Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 350 lbs. WC Carrying Weight: 3,500 lbs.
|
|
|
|
|
|
Draw-Tite receiver style hitch for the Mercedes-Benz ML320 and ML430 Solid all-welded construction for maximum strength and safety Trailer hitch is custom built according to the vehicle's manufacturer and model year to ensure perfect fit and top towing performance Computer-aided design and fatigue stress testing ensure a strong design that will withstand road abuse within specified capacities Black E-Coat base with black powder coat finish for corrosion resistance All frame attachment Simple bolt...
|
|
|
87413 - Hidden Hitch - Class III & IV Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 350 lbs. WC Carrying Weight: 3,500 lbs.
|
|
|
|
|
|
Hidden Hitch Class I Trailer Hitch Receiver is dipped in a black rust resistant coating. They are custom designed for each vehicle type and model year for simple installation and better fit. It has a low profile design to compliment the rear contours and aerodynamic styling of today's vehicles. It includes mounting hardware and easy to read installation instructions. It has 1-1/4" square receiver opening with simple bolt-on installation, no welding required. The removable drawbars and ball mounts eliminate banged...
|
|
|
87780 - Hidden Hitch - Class III & IV Trailer Hitch Receiver
2" Square Receiver Tube Opening. Black Enamel Powder Coat Finish. Receiver Style Hitch. All Frame Attachments. All Installation Hardware and Instructions Supplied. Backed by Nationwide Limited Lifetime Warranty. WC Tongue Weight: 500 lbs. WC Carrying Weight: 5,000 lbs. WD Tongue Weight: 750 lbs. WD Carrying Weight: 7,500 lbs.
|
|
|
|
|
|
Hidden Hitch Class I Trailer Hitch Receiver is dipped in a black rust resistant coating. They are custom designed for each vehicle type and model year for simple installation and better fit. It has a low profile design to compliment the rear contours and aerodynamic styling of today's vehicles. It includes mounting hardware and easy to read installation instructions. It has 1-1/4" receiver opening with simple bolt-on installation, no welding required. The removable drawbars and ball mounts eliminate banged or...
|
|
(US)
