|
|
|
|
Requires 4 shocks. Factory shocks can not be used with this application. Tuff Country™ Nitro Gas Shocks sold separately (see below). Brackets and all necessary hardware included.
|
|
|
Click to Enlarge The dual steering stabilizer is recommended for tires 35" and taller. This kit will improve overall steering and control as well as ball joint and tie rod end wear. Includes all brackets and hardware.
|
|
|
BDS Suspension Front Dual Shock Mounting Kit - Superduty
BDS Suspension Front Dual Shock Mounting Kit - Superduty
|
|
|
DUAL MULTIPLE SHOCK KITMultiple shock kit helps distribute the workload over multiple shocks Improve performance on or off-roadBolt-on kit - no special tools requiredRequires 4 shocks. Factory shocks can not be used with this application. Tuff Country Nitro Gas Shocks sold separately (see below). Brackets and all necessary hardware included.
|
|
|
Tuff Country's Dodge Ram dual shock kit allows you to add an additional shock to the passenger and driver side of your Ram 1500, 2500 or 3500. Increased shock dampening and control for lifted Dodge trucks with large tires.
|
|
|
In the model year of 2006 GM introduced new upper control arms on H2's. The new factory upper arms are much thinner and lighter than the previous design and therefore will not properly support the load of a dual shock mounting application. Fabtech has addressed this with a Dual Shock System that includes replacement upper control arms constructed of 1.5 OD DOM tubing with urethane frame pivot bushings. Approximately 4-hour bolt on, no weld installation. Drilling required. Mounts available in black...
|
|
|
|
|
|
Chevy/GMC 1969-87 1/2 & 3/4 ton 4wd - Front dual shock kit
|
|
|
Improves control for off-road driving. Bolt-on installation. Provides a more aggressive look. Compatible with all lift heights. Average installation time of 1 hour.
|
|
|
Rough Country Dual Front Shock Kit for 99-04 Superduty
This kit will allow your front suspension to run dual shocks for more control off-road and give your rig that desired look on the street. Kit comes complete with dual shock brackets and hardware. Hydro 8000 or Nitro 9000 shocks can be added.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Cognito dual shock hoop kit is designed to run two shocks on each front corner of the vehicle. Normally, there is no shock run in the factory location when running the dual hoop kit, as three shocks per corner is just too much dampening. The kit bolts on to the frame rails and the factory shock mount to make for a rigid mounting location for the front shocks. The hoops provide the upper mount for the dual shocks, and when running a replacement spindle kit, the Cognito Tubular Upper Control...
|
|
|
Rough Country Dual Front Shock Kit Chevy 1500HD 2001-2006 4WD
Set your HD apart with our NEW Dual Front Shock setup. Gain more control off-road and give your HD a more aggressive appearance on the street! Kit includes driver and passenger dual hoops, lower control arm brackets, (4) RC Hydro 8000 series shocks, and hardware. For use with Rough Country 6" lift kit.
|
|
|
Rebound and dual-speed compression adjustable gas shocks. Kit includes matching springs and hardware. Sold in pairs
|
|
|
1 Fox 2.0 Front Brushed Finish Shock (Dual Front, 4 needed) FOX-R-030-25/70
|
|
|
Fabtech's 2WD lift spindles not only increases the vehicle's height, but provides increased front-end ground clearance while providing a stock-like ride. Lift spindles are compatible with Fabtech's Performance Suspension systems or may be installed on stock suspensions. The one-piece cast design directly replaces the factory units for a quick, easy, no-weld installation. All spindles are engineered to accept factory ball joints and feature a press in axle snub design for superior strength and longevity...
|
|
|
The Cognito dual shock hoop kit is designed to run two shocks on each front corner of the vehicle. Normally, there is no shock run in the factory location when running the dual hoop kit, as three shocks per corner is just too much dampening. The kit bolts on to the frame rails and the factory shock mount to make for a rigid mounting location for the front shocks. The hoops provide the upper mount for the dual shocks, and when running a replacement spindle kit, the Cognito Tubular Upper Control Arm...
|
|
|
|
|
|
|
DUAL SHOCK SPRING "U" BOLT SKID PLATE KIT Features 1/4" thick spring plate and a heavy-duty 3/16" skid plate with welded braces Durable gold-zinc finish Dual shock kit is used to install a second shock; order shock pin to install an additional shock (sold separately; SKU# ZX496915W) Leaf spring "U" bolts are extremely vulnerable when you're trailblazing or rock climbing. They can break, stranding you in the middle of nowhere. This skid plate is designed to protect the "U" bolts and axles of serious off-roaders. Questions? Log onto www.performanceaccessories.com .
|
|
|
The Cognito dual shock hoop kit is designed to run two shocks on each front corner of the vehicle. Normally, there is no shock run in the factory location when running the dual hoop kit, as three shocks per corner is just too much dampening. The kit bolts on to the frame rails and the factory shock mount to make for a rigid mounting location for the front shocks. The hoops provide the upper mount for the dual shocks, and when running a replacement spindle kit, the Cognito Tubular Upper Control...
|
|
|
|
|
|
|
Overview: The Cognito dual shock hoop kit is designed to run two shocks on each front corner of the vehicle. Normally, there is no shock run in the factory location when running the dual hoop kit, as three shocks per corner is just too much dampening. The kit bolts on to the frame rails and the factory shock mount to make for a rigid mounting location for the front shocks. The hoops provide the upper mount for the dual shocks, and when running a replacement spindle kit, the Cognito Tubular Upper...
|
|
(US)
