|
|
|
|
Surebonder Flooring Cleat Nailer with Hammer
SRR1028: Ships Via Small Parcel Ground Features: Flooring Cleat Nailer with Hammer Drives L and T shape cleat nails from 1 - 2 in length Die cast aluminum/magnesium body with long handle for easy operation Well balanced hardened driver blade for a longer life Ergonomic design for less fatigue Composite base to eliminate scratch and damage to the surface of the wood Mallet included Specifications: Model Number: 9800 Dimensions: 19.6 L x 3.5 W x 22.8 H Load capacity: 100 nails Operating air pressure: 70-100 PSI (0.45-0.
|
|
|
Porter-Cable FCN200 2 Flooring Cleat Nailer
*Drives "L" shape cleat nails from 1-1/2" to 2". *Pneumatic driving action consistently drives fastener for better finished installation. *Unit comes fully assembled and ready for use right out of the box. *Strong, lightweight, die-cast aluminum housing. *Non-Marring base is designed to allow driving of fastener close to wall. *Better balance for stability - tool sits upright for smoother floor installation. *Rear-load gravity feed magazine with a bypass pusher. *Air fitting is angled so hose...
|
|
|
BOSTITCH engineered the MFN-201 flooring cleat nailer for users that prefer to install flooring manually. As a result, it requires no compressor or hose when driving fasteners. Its thoughtful design protects delicate flooring while maximizing user comfort. The MFN-201 installs both pre-finished and unfinished flooring (thicknesses of 1/2 In. to 3/4 In.).
|
|
|
Stanley Bostitch MFN-201 Flooring Nailer
BOSTITCH created the MFN-201 for DIYers that prefers to install flooring manually. It requires no compressor or hose when driving fasteners. Its thoughtful design protects delicate flooring while maximizing user comfort. The MFN-201 installs both pre-finished and unfinished flooring thicknesses of 1/2 In. to 3/4 In. (sold separately).
|
|
|
Bostitch Manual Flooring Cleat Nailer Kit
Manual Flooring Cleat Nailer Kit - MFN201. Mallet. Flooring Adapters (for 1/2" & 5/8" flooring). Hex Wrenches. Carrying Case.
|
|
|
|
|
|
Campbell Hausfeld 2-in-1 Flooring Nailer/Stapler Kit
2-in-1 Flooring Nailer/Stapler - CHN50399. Rubber Mallet. 1/4" Air Plug. Adjustment Tools. (2) Flooring Shoe Plate Protectors. (1) Box of Flooring Cleats and Staples. Storage Case.
|
|
|
Browse by Brand. Featured Categories.
|
|
|
Porta Nailer(r) Flooring Installation Kit (403)
|
|
|
Bostitch Industrial Manual Flooring Cleat Nailers
BSC2017: Ships Via Small Parcel GroundThis item features: Single-blow design reduces user fatigue Extra wide composite base plate for added stability Rubber bumpers protect against marring pre-finished flooring Long reach handle for added comfort Cartridge Cap.: 200 [Max] Nail Length: 1 1/2 in [Min], 2 in [Max] Length: 17 1/2 in Width: 3 1/2 in Height: 13 1/2 in Handle Type: Top Swan Neck Body Material: Aluminum Power Source: Mallet Actuated Applications: Flooring Includes: Mallet Wt.
|
|
|
|
|
|
|
|
|
Hardwood Flooring Cleat Nailer - MIIIFN. 1/2" Base Plate. 3/4" Base Plate. Graphite Mallet. Pre-Finished Flooring Adapter Foot.
|
|
|
PORTA NAILS MANUAL FLOORING. NAILER. *Kit includes: mallet,. wrenches and carry case. *Will nail these angles:. 5/8, 3/4, 33/32 flooring. *With accessory shoes you can. face nail 3/8-9/16 flooring. *For use in hardwood floor. installation. *Replacement 2 nails (Ace. No. 2125326). *Boxed.
|
|
|
Uses both "T" and "L" Cleats for use with a greater variety of fasteners Integrated safety protects the user and work piece by preventing accidental drives High capacity magazine reduces downtime by requiring fewer reloads "Preferred Seating System" provides accurate placement of fasteners and the proper angle and depth High strength aluminum housing for less weight and greater durability Non-marring accessory shoes allow for nailing in a variety of sizes, while preventing damage to the floor Uses Hitachi "T" and "L" Cleats- 2" T-Cleat (42629H), 1-1/2" T-Cleat (42640H), 2" L-Cleat (04702H), 1-1/2" L-Cleat (04704H) Sold separately- Wide Profile Flooring Shoe (330389) for 9/16" - 3/4" pre-finished wood flooring- may also be used for 5/8" - 3/4" imported and Bamboo flooring Sold separately- Nail Set (330328) for "T" and "L" cleats Includes: Non-marring Hammer (330631) 1/2" Shoe Pad
|
|
|
Senco Shf50 Pneumatic Hardwood Flooring Nailer
Senco SHF50 Pneumatic Hardwood Flooring Nailer *** BRAND NEW *** The new SENCO ® SHF50 Pneumatic Hardwood Flooring Nailer is ergonomically designed with the hardwood installer in mind. It has a rugged composite base to virtually eliminate scratching and damage to the wood surface. It's also the industry's only pneumatic hardwood flooring nailer with a work contact safety, which is activated when the tool is positioned on the flooring tongue, not by depressing a trigger.Designed for the install
|
|
|
Hitachi NT50AGF 2" Oil-less Flooring Nailer
Free Standard Shipping!!! Oil-less design for long life and prevention of oil stains on wood flooringIntegrated safety protects the user and work piece by preventing accidental driving
|
|
|
Campbell Hausfeld Hardwood Flooring Nailer and Stapler
Find the Campbell Hausfeld Hardwood Flooring Nailer and Stapler CH50399 at Air Compressors Direct. We offer a wide selection of air compressors from Briggs & Stratton , Campbell Hausfeld , Ingersoll Rand , Puma and Maxus , plus a full assortment of air compressor accessories and air tools including accessory kits , air dryers , air hoses , air tanks , covers , filters , fuel siphons , fuel stabilzer , gas cans , lubricators , nails , regulators , staples , tire gauges and valves .
|
|
|
The Grip-Rite GR200LCN 2" hardwood flooring cleat nailer is the ideal hardwood flooring tool for the professional installer looking for high speed, high volume fastening. This nailer handles 1/2" to 33/32" tongue and groove hardwood flooring.
|
|
|
Senco SHF15 Flooring Cleat Nailer
The Senco SHF15 manually operated flooring cleat nailer, item# 730001N, drives 1-1/2" to 2" L shaped cleat nails . Mallet included. Ratchet system allows cleats to be driven with multiple blows. This flooring nailer features a composite base to reduce surface damage and scratching. The Senco SHF15 cleat nailer is used for 1/2 to 33/32" hardwood flooring. 1/2" flooring applications requires optional adapter kit. Sold separately. Tool Specifications:
|
|
|
Uses 16 gauge "L" or "T" type flooring cleats 1-1/2" to 2" long. Uses 15-1/2 gauge 1/2" crown flooring staples 1-1/2" to 2" long. Magazine capacity of 100 staples and 120 nails, top loading magazine with push out cover. Additional base plate for installing 1/2" hardwood flooring. Maximum air operating pressure: 120 PSI. Air inlet: 1/4" - 18 NPT. Includes coupler plug, top handle, slugging hammer, wrench set, air tool oil, and additional base plate for installing 1/2" hardwood flooring. Flooring...
|
|
|
* High-speed, air-powered. * High-capacity magazine. * Long-reach handle for added user comfort and control. * Aircraft-grade aluminum housing.
|
|
|
Aluminum housing for job site durability. High-speed, mallet-actuated pneumatic operation increases productivity over manually-operated tools. Precisely drives L-shaped flooring cleats at proper angle and depth. Extra-wide composite base plate for added stability. Long-reach handle for increased comfort and added control (short handle optional). High-capacity magazine reduces reload time. Mallet included Specifications: Height: 11-1/2 in,292.1mm Length: 17-1/4 in,438.15mm Width: 3 in,...
|
|
|
The Model 200 is recommended for use on 5/16", 3/8", 1/2" and 9/16" Engineered, Tongue and Groove flooring. Standard configuration is Short Handle with Short Channel (S/S). Nailer package includes a White 3mi Mallet, 4 adapter pads, 4 shims, 2 Allen wrenches, lube oil and a manual. Requires a 70 to 110 psi air compressor. 20 Gage Powercleats
|
|
(US)
