|
Cleaning the Filter Strainer Screen
Cleaning the Filter Strainer Screen Whenever the large, square solution tank filter screen is removed for cleaning, inspect the cylindrical filter mounted on the end of the solution line inside of the tank. (The Wide Track has two filters.) If debris is present, remove the filter by pulling it off the solution line. Clean by holding the filter under flowing water. Replace filter by pushing over the end of the solution hose. Replace if filter is damaged, worn, or no longer appears to be functioning...
|
$2
See 2 Stores
See All Stores
|
|
|
|
|
Our Water Filters/Strainers protect your engine from damage due to waterborne debris such as seaweed, sand, grass and pebbles that are sucked into the cooling system. Filters mount inline with the inlet cooling hose to your watercraft's engine. Filter cup is clear to provide easy visual inspection, threaded for quick removal and seals with a durable rubber o-ring.
|
|
|
In-Line Fuel Strainer, Steel Screen Media, Length 4 1/4 In, Outside Dia 1 29/32 In, Inlet 1/2 In, Outlet 1/2 In
|
|
|
Model: Anthony Parts. Shipping Weight: 1lbs. 998 Units in Stock. Manufactured by: Val-Pak.
|
|
|
Easy To Use. Lightweight. Makes Great Sauces. Prepare Vegetables And Fruit For Canning. Filters Seeds. Canner.
|
|
|
|
|
|
External Line strainer with screen for 240gph filter pumps.
|
|
|
Note: For filters after 1999 order PAC-051-9954-FNS 39 - Pentair FNS Strainer, Air Vent 3/4 in (172855)
|
|
|
No more stems or cobs with this simple to use cleaning insert! Simply pour your corn and the screen filters out all the trash!
|
|
|
|
|
|
|
|
|
|
|
|
Sand Separator Filter Screen: 2in. 100gpm 100 mesh; 1/2 inch drain clean out with cap. No valve included but fits any 1/2 inch pvc threaded valve or use cap.
|
|
|
Jabsco Pumpgard In-line Strainer Screen 36400-1110
Prevents debris from entering pump intake. Works in any position. Ideal when remote mounting away from pump is needed for easy service access. Transparent inspection housing. Twist off clear bowl. 16 or 50 mesh stainless steel filter screen. Compatible with salt or fresh water, meets FDA standards for potable water. 1/2" x 1/2" MPT.
|
$17
See 2 Stores
See All Stores
|
|
|
|
|
Weight: 0.5 lb. Height: 26 in. Width: 4 in. Depth: 3.9 in.
|
|
|
Used on any aerator pump intake. Simply screws onto threaded pump intake in livewell or on exterior of boat. Used as a strainer on livewell drains. Screws onto thru-hull fitting. Fits T-H Marine thru-hulls (TH-1, TH-1XL, TH-90 and TH-92). Same as a AS-2 with super fine mesh to trap small debris. Prevents Pump Damage. Threaded Base.
|
|
|
Supply Co :: Parts :: Valves, QDs, Fittings, Etc. :: Filters & Screens
Tee Jet In-line filter with Strainer & 1/4" FPT Adapter
|
$1
See 12 Stores
See All Stores
|
|
Brass bodies & cap. FPT inlet & outlet. Stainless steel 50 mesh cylinder screen. 170 PSI max pressure. 194 deg. F max temp.
|
|
|
Intake Screens 1 in Strainer Small
|
$3
See 2 Stores
See All Stores
|
|
Sand Separator Filter Screen: 2in. 100gpm 60 mesh; 1/2 inch drain clean out with cap. No valve included but fits any 1/2 inch pvc threaded valve or use cap.
|
|
|
Line strainer screen replacement for 240gph filter pumps that have the external screens.
|
|
|
|
|
|
|
|
(US)
