|
Fieldpiece SC46 Clamp-On Meter
SC44 is the basic clamp meter with NCV in a size that easily fits on a tool belt or in a tool case. SC45 adds temperature and capacitance. SC46 adds true RMS and backlight. <table width="586"
|
|
|
The SC line of current clamps is for the field service technician who wants to get the most out of the one meter he carries. The SC66 and SC67 are manual rangers. The SC76 is an autoranger that works with Fieldpiece accessory heads. The SC76 has more ranges and functions plus a bar graph. The SC77 adds a 4000 count display with backlight and TrueRMS. Non-contact Voltage Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V. Microamps For flame rectifier diode...
|
|
|
Hi-voltage indicator you can?t miss--both LED and beeper turn on to indicate you?ve touched a potentially dangerous voltage. Continuity indicated by LED and beeper. MAX hold automatically holds reading so you can look at the meter after you?ve disconnected. Low ohms ranges for motor windings and mid range for thermistors. Amps AC resolution to 0.01A for heat anticipator circuit (20A range). Up to 200AAC with 0.1V resolution (200A range). VDC to 0.01V resolution (20V range). Auto-power off to extend...
|
|
|
Fieldpiece SC76 Expandable Clamp-On Meter HVAC Click an Image to Enlarge Retail Cost: 166.00 The SC line of current clamps is for the field service technician who wants to get the most out of the one meter he carries. The SC66 and SC67 are manual rangers. The SC76 is an autoranger that works with Fieldpiece accessory heads. The SC76 has more ranges and functions plus a bar graph. The SC77 adds a 4000 count display with backlight and TrueRMS. Non-contact Voltage Loud beeper and bright LED indic
|
|
|
SC44 is the basic clamp meter with NCV in a size that easily fits on a tool belt or in a tool case. SC45 adds temperature and capacitance. SC46 adds true RMS and backlight. <table width="586"
|
|
|
|
|
|
Dual-Display: View amps through the clamp while viewing any of the dial functions. Two real-time displays are better than one. Non-contact Voltage: Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V (thermostats). Temperature (SC53): Thermocouple plugs in directly for accurate readings, even in fast changing environments. No adapter to lose. Capacitance (SC53): For motor-run and motor-start capacitors. Wire Grabbing Jaw: Jaw shaped to make grabbing a wire easy...
|
|
|
Fieldpiece SC44 Clamp-On Meter HVAC NEW Click an Image to Enlarge Retail Cost: 69.00 SC44 is the basic clamp meter with NCV in a size that easily fits on a tool belt or in a tool case. (SC45 adds temperature and capacitance. SC46 adds true RMS and backlight.) Non-contact Voltage Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V. Temperature Thermocouple plugs in directly for accurate readings, even in fast changing environments. Wire Grabbing Jaw Jaw
|
|
|
Fieldpiece SC67 Clamp-On Meter
|
|
|
Accuracy: 0 to 400A 50Hz to 60Hz?(1.5%+2A), 0 to 400A 61Hz to 400Hz?(3%+2A)400A to 1000A, 50Hz to 60Hz?(2%+2A)400A to 1000A, 61Hz to 400Hz?(3.5%+3A
|
|
|
The padded ANC4 case is included with every SC series meter. It has a zippered pocket and a belt loop on the back. Also included are test leads, battery (installed), and operator?s manual.
|
|
|
The SC66 and SC67 are manual rangers. The SC76 is an autoranger that works with Fieldpiece accessory heads. The SC76 has more ranges and functions plus a bar graph. The SC77 adds a 4000 count display with backlight and TrueRMS.
|
|
|
The SC64 is the basic clamp meter. The SC66 is a manual ranger designed for HVAC/R. The SC76 is an autoranging version of the SC66 that works with Fieldpiece accessory heads. The SC76 has more ranges and functions plus a bar graph and 4000 counts. The SC68 is perfect for those working with electrical power.
|
|
|
Use Fieldpiece K-type thermocouples with any meter using the K-type design. The new line of thermocouples (ATA1, ATAF1, ATWB1) include alligator clips so that you can just clip to the spot you're testing. Yo
|
|
|
Use Fieldpiece K-type thermocouples with any meter using the K-type design. The new line of thermocouples (ATA1, ATAF1, ATWB1) include alligator clips so that you can just clip to the spot you?re testing. You no longer need three hands to do your job. All three pipe clamps are redesigned to provide faster and more accurate pipe temperatures. Wrap the lead wire around the tab for convenient lead storage.
|
|
|
Use Fieldpiece K-type thermocouples with any meter using the K-type design. The new line of thermocouples (ATA1, ATAF1, ATWB1) include alligator clips so that you can just clip to the spot you?re testing. You no longer need three hands to do your job. All three pipe clamps are redesigned to provide faster and more accurate pipe temperatures. Wrap the lead wire around the tab for convenient lead storage.
|
|
|
Fieldpiece ACDC6 AC/ DC Current Clamp
Connect to any digital multimeter with industry standard jacks to measure AC or DC current up to 600A. Reads amps directly on any Fieldpiece meter so thereâÂÂs no need to mentally move decimal points.<fon
|
|
|
Use Fieldpiece K-type thermocouples with any meter using the K-type design. The new line of thermocouples (ATA1, ATAF1, ATWB1) include alligator clips so that you can just clip to the spot you?re testing. You no longer need three hands to do your job. Both pipe clamps are redesigned to provide faster and more accurate pipe temperatures.
|
|
(US)
