|
|
|
|
This classic enamelware bowl is both a decorative and useful item for your bathroom or anywhere else you want to display soaps, lotions, candles, potpourri, fixins or other accent items. Brand new, but made to look antique and vintage by the manufacturer. Currently available in white enamel with black trim and black lettering, or cream enamel with green trim and black lettering. The "SOAPS" lettering appears on only one side. These bowls have an approximate 3 1/2 cup capacity and are 3 1/4 “ high...
|
|
|
This medium deck height iron block was designed for "Truck Pro Stock Racing" with the following features: Technical Notes: * 8.700" deck height that can be machined to 8.500" * Has standard Chevrolet bell housing bolt pattern * Delivered with 3.900" cylinder bore and can be bored to 4.190" * Uses jesel style timing belt system (4.953 cam to crank) * Has no lifter holes or cylinder head bolt * 2.300 main bearing diameter and 2.250" cam bearing * All other diameters are same as block P/N 2450265...
|
|
|
Description: Reissue of single from Pete''s 1998 classic 'Soul Survivor'
|
|
|
* Clutch linkage boss is cast into block, but must be drilled. * Requires addition of starter (not included). * Requires electric fuel pump because Gen VI tall-deck block. * Comes with a 14-inch automatic transmission flexplate. * Intended for 1979-and-earlier pre-emissions vehicles and all. * Not intended for marine applications. * Big, sticky slicks will help hook up this monster!.
|
|
|
* 10.200 tall deck height. * Nodular iron bearing caps. * Two piece rear main seal design * 16 degree splayed bearing caps. * Mechanical fuel pump provisions. * Grade 8 bearing cap bolts fully CNC machined block. * Machined for production. * Cylinder bore size 4.494" cam with roller lifters.
|
|
|
MonteVina Pinot Grigio California 2007 is virtual sunshine in a glass. Vibrantly hued, it catches the light and warms a room. Breezes of ripe pears swirl with hints of peach and lotus blossom to form a heady perfume. Each sip delivers cool ripe pear slices coupled with lively acidity each more refreshing than the last. All you need to add is the deck chair!
|
|
|
This great video gives you all the information you need to gain entry into the hot new sport of kayak fishing, from rigging your yak to launching safely in the surf. It covers every aspect of kayak fishing including handling large fish safely, plus tips on packing safety equipment, navigation aids, and tackle into your on deck kayak fishing crate. You will also learn about selecting fishing kayaks. It will be entertaining for every sportsman, and has been inspired by the folks who operate coastal...
|
|
|
Great Plains Industrial Crate Wagon
Auto-style steering makes wagon less prone to tipping during turning. Grooved deck surface. Long, D-shaped handle. 13" x 5" pneumatic wheels roll easily on most terrains. Wide track makes wagon less prone to tipping. Volume Discounts Available - Call 866-736-2084.
|
|
|
Alphabet Flash Cards
Introduce children to the spoken and written language through letter sounds and simple phonics. Images are clear, colorful and beautiful. Included in the set are hard & soft consonants, long & short vowels, and more. Comes with helpful instructions telling parents how to use the deck with their children. The 45 flash cards are 4 1/2 x 6 and the matte lamination on the front helps to keep them durable. Developed with a Language Arts Consultant/Early Literacy Teacher Trainer.
|
|
|
* 10.200 tall deck height. * Nodular iron bearing caps. * One piece rear main seal design * 16 degree splayed bearing caps. * Mechanical fuel pump provisions. * Grade 8 bearing cap bolts fully CNC machined block. * Machined for production. * Cylinder bore size 4.494" cam with roller lifters.
|
|
|
* 9.800 standard deck height * Nodular iron bearing caps. * Two piece rear main seal design * 16 degree splayed bearing caps. * Mechanical fuel pump provisions * Grade 8 bearing cap bolts. * Machined for production. * Cylinder bore size 4.494" cam with roller lifters.
|
|
|
* 9.800 standard deck height. * Nodular iron bearing caps. * One piece rear main seal design * 16 degree splayed bearing caps. * Mechanical fuel pump provisions * Grade 8 bearing cap bolts. * Machined for production. * Cylinder bore size 4.494" cam with roller lifters.
|
|
|
This "CNC machined" cast iron bow tie block has an deck height that starts at 8.300" and can be machined to 3.400", compared to the standard block's 9.025" deck height. This block is designed for small cubic inch engines used in drag racing, road racing, or restricted oval track racing. The factory bore on this siamesed block is 3.980" and can be bored to a maximum of 4.190" with a minimum cylinder wall thickness of .250". The camshaft has been raised up to 4.953" to use belt style timing drives...
|
|
|
The Gen V Pro Stock Bow Tie bare block has been the standard for the serious pro stock or boat racer. The Bow Tie block has siamesed cylinder walls, and a two-piece rear main oil seal. Some of the standard features of this block are: extra thick deck surfaces with blind tapped head bolt holes, priority main oiling, no mechanical fuel pump boss, improved coolant flow around the No. 1 cylinder, and inner head bolt bosses. This block also has steel four-bolt splayed bearing caps. Mark IV style cylinder...
|
|
|
For those who need the max, here’s an 502ci Gen VI Chevrolet big-block with roller camshaft. This block is identical to the Gen V block, but has a new roller camshaft design block. The pistons, rods and crankshaft are the same as Gen V. This engine features a standard deck height “iron” block with four-bolt main bearing caps, a 4.00" stroke forged steel crankshaft and 4.47" diameter forged pistons. The compression ratio is a reasonable 8.75:1 when used on the 502 HO engine, with 118cc chambers cast...
|
|
|
This new 15º aluminum cylinder head is designed for small displacement racing engines that run in NHRA competition eliminator. This head is identical to the 18º head, except the head is rolled by machining the deck surface at a 2º angle and thereby removing more material from the exhaust side of the head than the intake side. The valve guide holes are also tipped 1º in the casting to produce a total of 3º valve angle. Smaller combustion chambers are the main advantage. The head does not have valve...
|
|
|
This aluminum block is fully machined and ready for assembly. This kit includes high quality 1/2 inch head studs and 7/16 inch main studs. The cylinders incorporate steel liners, machined for stainless steel o-rings and head gasket (P/N 88958614). This block has a 3.400 inch bore and 8.700 inch deck height. With the bedplate installed the block weighs approximately 69 lbs.
|
|
|
This heavy-duty composition head gasket for iron or aluminum heads is teflon coated and has pre-flattened steel fire rings (this feature reduces head and deck surface galling). This gasket features a 4.200" bore for bow tie, 400 small blocks and aluminum blocks. This gasket does not have steam holes required for the production 400 S/B. It does have revised coolant hole pattern (this reduces coolant temperatures between the center bores). This head has compressed thickness of .038" with volume of...
|
|
|
If you have a 4.8L, 5.3L, 5.7L, or 6.0L Gen III V8 (LS6 design) engine and want to improve the power output, bolt on a set of new GM Performance Parts CNCPorted LS6 cylinder heads. These heads have the same CNC port as the 88958622 race heads, but the deck has been planed just enough to maintain the production 65cc chambers giving a 10.5:1 compression ratio. Loaded with premium hollow stem stainless steel valves, Cr-Si ovate wire valves springs and other production components these head will support...
|
|
|
GM Performance Parts is thrilled to offer the LS9 6.2L in a fully dressed crate engine package. And while it shares the 6.2L displacement of other LS engines, this one is unique, with stronger block casting, stronger cylinderhead castings and steel cylinder liners that are honed with a deck plate installed to maximize performance and cylinder sealing.
|
|
|
100% CNC Machined Cast Iron (280 KPa Tensile). True Priority Main Oiling. 6 Head Bolts per Cylinder. Siamese Cylinder Bores. Standard 4.400" Bore Spacing. Standard Deck Heights (9.700"Tall Deck to Follow). Increased Deck Thickness. LS7 6-Bolt "Doweled-in-Place" Billet Main Caps. Max 4.500" Stroke (Tall Deck Version Only). Capable of 364 to 500+cid (Tall Deck for Larger Displacements). Wet Sump and Dry Sump Capability. Deep Skirted and Dry Sump Capability. Deep Skirted Head Bolt Holes...
|
|
|
"The splayed-valve cylinder head has 240cc intake runners." The splayed-valve casting has a .240" minimum port wall thickness that permits extensive modifications by cylinder head specialist seeking even more airflow. The intake valves are angled 16º to the deck surface and tilted (splayed) 4º . The exhaust valves are 11º , with a 4º tilt. This cylinder head has symmetrical intake and exhaust ports and can accommodate a 2.20" diameter intake valve and a 1.65" exhaust valve. Its nominal combustion...
|
|
|
"The splayed-valve cylinder head has 240cc intake runners." The splayed-valve casting has a .240" minimum port wall thickness that permits extensive modifications by cylinder head specialist seeking even more airflow. The intake valves are angled 160 to the deck surface and tilted (splayed) 40. The exhaust valves are 110, with a 40 tilt. This cylinder head has symmetrical intake and exhaust ports and can accommodate a 2.20" diameter intake valve and a 1.65" exhaust valve. Its nominal combustion chamber...
|
|
|
The splayed-valve cylinder head has 240cc intake runners. The splayed-valve casting has a .240" minimum port wall thickness that permits extensive modifications by cylinder head specialist seeking even more airflow. The intake valves are angled 16 degrees to the deck surface and tilted (splayed) 4 degrees. The exhaust valves are 11 degrees, with a 4 degree tilt. This cylinder head has symmetrical intake and exhaust ports and can accommodate a 2.20" diameter intake valve and a 1.65" exhaust valve...
|
|
(US)
