|
The Edelbrock Performer-Plus Camshaft and Lifter Kit are part of the total power package to produce optimum torque from the low-end to the mid-range. It features smooth idling cams for daily drivers, trucks or vans. The advertised intake duration is 278 degrees and the exhaust duration is 288 degrees. The camshaft comes with hydraulic lifters, assembly lube and full instructions. The intake valve lift with factory rocker arm ratio is 0.42 and the exhaust valve lift with factory rocker arm ratio is 0.442.
|
|
|
Camshaft and Lifter Kit
This kit comes with Cam #SRC-5, Lifters #201 and a 4 oz. bottle of Mell Lube. For AMC 304, 360 and 401 engines.
|
$149
See 3 Stores
See All Stores
|
|
The Edelbrock Torker-Plus Camshaft and Lifter kit is designed to work with Edelbrock's Torker II manifolds for performance from 2,500 to 6,500 RPM for increased horsepower and optimum torque from the low-end to the mid-range. They are ideal for high-performance street, drag or marine applications. They offer improved throttle response and torque. The intake valve lift with factory rocker arm ratio is 0.488 and exhaust valve lift is 0.488. The intake duration at 0.050 lift is 232 degrees and the exhaust duration...
|
|
|
|
|
|
The Edelbrock Performer-Plus Camshaft and Lifter Kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling camshafts for daily drivers, trucks, vans, RVs and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube and instructions. The valve springs, retainers, locks, pushrods, rocker arms and gaskets are not included. Both the lifter and cam comes with hydraulic flat tappet style. The advertised intake...
|
|
|
Sign up for newsletters, promotions, sneak previews, design ideas, and more! Your email address:
|
|
|
Edelbrock Ford All Models Camshaft And Lifters Kit - Ford All Models Camshaft And Lifters Kit
|
$173
See 2 Stores
See All Stores
|
|
The Edelbrock Performer-Plus Camshaft and Lifter Kit are part of the total power package to produce optimum torque from the low-end to the mid-range. It features smooth idling cams for daily drivers, trucks or vans. The advertised intake duration is 244 degrees and the exhaust duration is 264 degrees. The camshaft comes with hydraulic lifters, assembly lube and full instructions. The intake valve lift with factory rocker arm ratio is 0.398 and the exhaust valve lift with factory rocker arm ratio is 0.442.
|
|
|
Duration @ .006": 259º Intake/267º Exhaust. Duration @ .050": 204º Intake/210.5º Exhaust. Lobe Separation: 116º. Intake Centerline: 120º ATDC. Lift: .500" Intake/.488" Exhaust. Basic rpm: 3,000 - 6,200.
|
|
|
The Edelbrock Performer-Plus Camshaft and Lifter Kits are designed to produce optimum torque and horsepower from off-idle to 5,500 RPM. They are ideal for any daily driver, truck, van or RV. These kits offer optimum throttle response and torque.
|
|
|
|
|
|
The Edelbrock Performer-Plus Camshaft and Lifter Kits are designed to produce optimum torque and horsepower from off-idle to 5,500 RPM. They are ideal for any daily driver, truck, van or RV. These kits offer optimum throttle response and torque.
|
|
|
COMP CAMS Camshaft and Lifter Kit, Hydraulic-Great for Street Machines, largest cam for stock converter.
|
|
|
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500...
|
|
|
This 5.7L Hemi Mopar Performance camshaft was designed applying the same technology utilized on NASCAR racing engines as a drop-in replacement for the stock cam. It will increase airflow and engine output at 3,000 rpm and above while maintaining low rpm drivability characteristics. Requires Non-MDS hydraulic lifters (included). Can be used with 5.7L Hemi production valve springs.
|
|
|
COMP CAMS Camshaft and Lifter Kit, Hydraulic-Great for Street Machines. Needs stall, headers & gears. Rough idle.
|
|
|
COMP CAMS ® Small Block Chevy Xtreme Marine XM262H Hydraulic Flat Tappet Cam and Lifter Kit #CL12-236-3 INCLUDES CAMSHAFT AND #812-16 LIFTERS HYDRAULIC FLAT TAPPET #XM262H- Biggest Cam for Inboard/Outboard, good mid-ranfe ith excellent response, noticable idle More details...
|
|
|
COMP CAMS Camshaft and Lifter Kit, Hydraulic-Very strong mid-range torque & throttle response, 2200+ stall.
|
|
|
Includes 5.7L Hemi camshaft (P5153325) and non-MDS hydraulic lifters (16 total). Duration @ .006":259/267, Lift:.500/.488
|
|
|
1988-93 Corvette heads require the use of guide plates. 1955-57 265 c.i.d. engines need an oiling groove in rear journal of camshaft. This camshaft is for carburetor equipped vehicles only. 50-state legal for 1987 and earlier carbureted V8 small block Chevy 262-400 c.i.d. C.A.R.B. E.O #D-279-3 D279-5 D-279-6
|
|
|
COMP CAMS Camshaft and Lifter Kit, Hydraulic-Street / Strip, 2800+ stall, likes headers & gears, rough idle.
|
|
|
COMP CAMS Camshaft and Lifter Kit, Hydraulic-Pro Street / Bracket, needs good intake, headers, gear & 3300+ stall.
|
|
|
CAMSHAFT. ENGLE TCS10 .. w/Gear and Lifters
Race proven in some of the fastest VW's in the world. Engle Cams feature billet strength and reliability.
|
$160
See 2 Stores
See All Stores
|
|
Edelbrock 2103 Performer-Plus Chevrolet 400 small block cam and lifter kit. Designed for optimum torque from the low end to the mid range. Match with Edelbrock's Performer intake manifold for strong street performance from off-idle to 5,500 rpm. Smooth idling cam for daily drivers, trucks, vans, RVs, and 4x4s. You can expect a major improvement in throttle response and torque. Picture shows a typical Edelbrock Performer-Plus cam kit but is not application specific. Kit includes camshaft and hydraulic...
|
|
|
|
|
(US)
