|
Brake Proportioning Valve
.
|
|
|
All parts are covered only by the Manufacturer's Warranties and/or Guarantees. 4 Wheel Drive Hardware can and will not assume responsibility for use or application by the user. 4 Wheel Drive Hardware is not liable for any labor, incidental, or any other associated costs related to installation of products.
|
|
|
|
|
|
Installing an adjustable brake proportioning valve requires disabling the original factory proportioning valve, either by removing it from the system, or by dismantling it and installing a different end plug. While it is common for racecars to have the brake lines completely re-plumbed to eliminate the stock proportioning valve, MM designed this kit to allow easily removing the stock proportioning valve while also retaining all of the stock brake line plumbing. This is much easier to do than the...
|
|
|
Wilwood brake proportioning valve
|
|
|
By popular demand, we carry the Russell Brake Proportioning Valve. If you are not using the 4 wheel disc master, then this is the way to go. Let's you adjust the brake bias with a quick turn of the knob. Russell Brake Proportioning Valve is Adjustable up to a 60% pressure reduction. Utilizes anti-corrosive brass internal components. To install, you simply cut the hard line and install.
|
|
|
1987-1995 Wrangler YJ, Cherokee XJ, Grand Cherokee ZJ
|
|
|
Big Brake Proportioning Valve Kit
* This proportioning valve has six preset adjustment points actuated by moving a lever allowing racers to adjust brake bias. The lever 'clicks' into the six positions for positive adjustment and the bright red levers are easily seen in your beautifully detailed front compartment, and extremely easy to use by the small monkey we rent to sit down there. Ideal for oval track, road race, and off road racing where car and racing conditions change throughout the race [ and if you do this in your NSX please...
|
|
|
ABS Brake Proportioning Valve Depressor. The proportioning valve depressor works on various GM. utility vehicles, vans, and pickups fitted with Kelsey Hayes. anti-lock brake systems. It also works on rear-wheel anti-lock. brakes.
|
|
|
Replacement Valve This Corvette replacement brake proportioning valve has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Corvette.
|
|
|
D17 175-420 - Brake Proportioning Valve Brake Master Cylinder Kit Fits: 1993 - 1997 Camaro (RS & Z28) Fits: 1993 - 1997 Firebird (Formula, Trans Am, Trans Am GT & Trans Am GTA SLP) Cross Reference for GM Part Number: 18020020 Limited Stock: Please contact RMS for availability
|
|
|
this setup allows you to dial in optimized braking whether you're running stock brakes with modified suspension/treads etc or our Xtreme ultimate 13" front setups (soon to be in our webshop) with our 11.4" rear disc setup
|
|
|
Mk1 and Mk2 plus Cooper S Mk3 this valve was fitted to every Mk1/2 car including cooper S and the MK3 Cooper S only.For Mk3 versions 850/998/1100 use 21A2031
|
|
|
Stainless Steel Brake Corp. developed a super-compact brake proportioning valve that has a grip knob for fine-tuned adjustments, a 60 percent reduction over the full pressure range and billet aluminum construction with anti-corrosive brass intervals. This competition-proven unit measures only 1-3/4" high by 1-1/4" wide by 3-1/4" deep, which fits even the tightest cockpits. It comes with 3/16" tube adapters.
|
|
|
Gauge screws into bleeder port. Use to check brake line pressure throughout system. Kit includes proportioning valve to regulate rear brake line pressure between 50% and 100%. Includes adapters and fittings. Sold per kit.
|
|
|
|
|
|
This EMPI knob style proportioning valve enables you to adjust the front to rear brake bias with a twist of a knob. Provides up to 50% reduction. Fitting ports are 1/8 inch NPT. Valve includes fittings to adapt to 3/16 inch SAE brake line. Allows easy adjustment of front to rear brake bias when you have to deal with a large tire to small tire ratio or when you wish to tune your brake system to the way you drive.
|
|
|
With this Wilwood Proportioning Valve you can fine-tune your brake system by adjusting the line pressure to your rear brakes for the optimum brake balance. The valve comes with the correct adapters. Very easy installation! When installing an adjustable proportioning valve, (MMBAK-6) is the kit required to modify your stock valve.
|
|
|
Brake Proportioning Valve, Jeep Wrangler YJ, 1987-93.
|
|
|
1974 - 1982 Line , left front brake proportioning valve to rubber line stainless steel
|
|
|
|
|
|
1958-70 BRAKE PROPORTIONING VALVE FOR 4 WHEEL DISC BRAKES (ea)
|
|
|
The prop valve body uses 1/8 pipe thread (NPT) and the adaptors we supply with this are 3/8"-24 tube nut for 3/16" tubing and 7/16"-24 tube nut for 1/4" tubing.
|
|
|
|
|
|
Adjustable distribution block, connects to the master cylinder and distributes brake fluid to all four wheels.
|
|
(US)
