|
The MEGAshield is a Shield board that sits on top of a standard Arduino MEGA board
|
|
|
All Arduino mega pins are brought to this protoshiled. 5V, GND, digital I/O, analog input, and the RESET button, etc are all exposed to users. Download:
|
|
|
Arduino MEGA
The Arduino Mega is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed...
|
$58
See 5 Stores
See All Stores
|
|
By popular demand! We are now carrying the Mega. The Mega is basically a big brother to the Arduino Duemilanove (& similar), with many more pins, UARTs, PWMs, etc. If you've run out of pins on your Arduino or you need 128k of flash (compared to 32k!) you will find this a good upgrade!
|
|
|
Arduino Shield - MEGA Proto PCB
Power bus for +5V and GND down the center of the board. Central bus can be configured to carry +5V, GND, neither or both (set with jumpers). Special horizontal 5-pin bus to install pin headers for external connections. 2x5 IDC connector area for external connections. Holes connected in groups of five, much like a breadboard. All regular Arduino pins accessible on top. No worries about shorting against large USB jack! This Shield does not go over it!. Power LED and reset button on top. USB...
|
$6
See 2 Stores
See All Stores
|
|
DescriptionOverview * PCB used for Arduino MEGA Prototyping * Multilayer PCB design * All hardware included * Soldering and assembly required The Arduino Prototyping Shield Kit for Arduino MEGA allows you to create a prototyping board to connect to the Arduino MEGA Microcontroller. The board is intended to fit atop the Arduino MEGA Microcontroller module and is clearly labelled. Prior soldering experience is recommended. List of RobotShop different items in this product : * PCB used...
|
|
|
DescriptionOverview * PCB used for Arduino MEGA Prototyping * Multilayer PCB design * Components sold separately * Soldering and assembly required The Arduino Prototyping Shield PCB for Arduino MEGA allows you to create a prototyping board to connect to the Arduino MEGA Microcontroller. The board is intended to fit atop the Arduino MEGA Microcontroller module and is clearly labelled. Prior soldering experience is recommended. List of RobotShop different items in this product : * PCB...
|
|
|
Seeeduino Mega is a microntrolller board based on ATmega1280, derived from Arduino Mega with changes in pursuit for small form factor, flexibility and functionality.It has 70 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it...
|
|
|
This is an extra large protoshield designed by NKC for the Arduino Mega. We include 3 sticks of 36 pin header, 9 8-pin female headers, a 6-pin female header, a red LED, 1K LED resistor, button, 2x3 reprogramming header and a 0.1uF cap
|
|
|
* Microcontroller: ATmega1280. * Operating Voltage: 5V. * Input Voltage (recommended): 7-12V. * Input Voltage (limits): 6-20V. * Digital I/O Pins: 40 mA. * Analog pins: 16 (10 bit resolution provides a range of 1024). * Analog voltage: 0 to 5V (upper limit can be changed using Aref pin). * DC Current for 3.3V Pin: 50 mA. * Flash Memory: 128 KB of which 4 KB used by bootloader. * SRAM: 8 KB. * EEPROM: 4 KB. * Clock Speed: 16 MHz.
|
|
|
Arduino Shield - MEGA Proto Kit
Arduino MEGA Proto shield bare PCB. 1 x 40 way male 0.1" strip. 1 x 40x2 way male 0.1" strip. 2 x pushbuttons. 5 x 220 Ohm resistors. 5 x 1K Ohm resistors. 5 x 10K Ohm resistors. 3 x LEDs.
|
$10
See 2 Stores
See All Stores
|
|
Product Info Arduino MegaShield Kit sku: DEV-09346 Description: The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a prototyping area, two general LEDs, and, most important of all, the Arduino Mega reset switch is brought to the top level. The shield also works with our small breadboards if you don't want to solder to the prototyping area. This comes in kit form and must be soldered together by the end user. Please note...
|
|
(US)
