|
Ape Hangers* Handlebars
Tip to Tip = 32.00. Base Width = 10.00. Rise (Inside) = 10.25. Pull Back = 6.50. Knurl Center to Center = 3.14. Rise (Tip-to-Base) (Outside) = 8.75.
|
|
|
16" Ape Hangers 1-1/4" diameter Handlebars
|
|
|
Khrome Werks 12 inch Narrow Ape Hanger Handlebar, Dimpled - 82 and newer Harleys
Khrome Werks 12 inch Narrow Ape Hanger Handlebar, Dimpled - 82 and newer Harleys
|
|
|
18" APE HANGERS 1-1/4" DIAMETER HANDLEBARS
This set gets a 3 solely because it's a great looking set of bars once you finish installing the product. ABSOLUTLEY does not fit the OEM riser on a 2006 V-Star 1100 Classic! I ended up buying an aftermarket set of 1/2 inch over stock risers because of the issue. which in turn pushed my luck to the limit with the install of the cables. I had to hope they would reach but they did, thankfuly. It was very difficult to find a 1 1/2" "straight" riser to match the oem height. the closest I was able to...
|
|
|
Please e-mail us with any questions before bidding. We make every effort to answer every e-mail we get, but sometimes there are more than we can handle which takes us a little longer. We are open Monday-Friday 8am-6pm Central time, and we answer e-mails and telephone calls during that time. Read item description carefully and place bids according to the item description. The listing title is used for key words only, and may not provide accurate information. We make every effort to have the listed...
|
|
|
FXDWG APE HANGER HANDLEBAR
FXDWG APE HANGER HANDLEBAR made by Khrome Werks Application: See description in catalog at Link to Catalog Page
|
|
|
|
|
|
Tattoo bars feature an engraved flame design on exposed sections. Drilled for internal wires; works with standard controls. Brilliantly show-chromed. Springer-style bars have the area between the risers increased to 1 1/4" for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles, 86-94, 95-04 and mini gauge. 1 1/4" thick risers are also available to complete the Buffalo look; accepts 1" diameter...
|
|
|
|
|
|
Chrome 1" steel handlebars for pre-1982 Big Twin and Sportster models or those from 1982 to present (with wiring recess).
|
|
|
Khrome Werks 18 inch Ape Hanger Handlebar, Dimpled - 82 and newer Harleys
Khrome Werks 18 inch Ape Hanger Handlebar, Dimpled - 82 and newer Harleys
|
|
|
these handlebars were designed for that old chopper look. They're available in dimpled and non.
|
|
|
Khrome Werks 16 inch Ape Hanger Handlebar, Dimpled - 88-03 Softail Springer
|
|
|
|
|
|
Two diameters available. 1/4-20 riser thread. Made in the U.S.A.
|
|
|
These 1" bars work on all hand controls early or late models. They are made of steel then powdercoated black.
|
|
|
1" Diameter Chrome Ape Hanger 18" rise no dimples for internal wiring 14 Guage steel tubing Diamond knurled for OEM risers on 3-1/2" centers to prevent slippage Available in OEM and custom bends Available with or without wire dimples for late-model controls SOLD EACH
|
|
|
These Bars are 1-1/4" across the center and require the use of 1-1/4" diameter Riser Clamps; with control area at 1" diameter for stock controls
|
|
|
these handlebars were designed for a just right feel. They have a beautiful chrome finish.
|
|
|
Ride your cruiser like a hawg. Get those grips up over your head and hang. Cool. 7/8" handlebar clamp, approx 15" rise, 32" wide. Cruiser Lowrider Chopper Bar Bars Handlebar Dyno Schwinn Style. Bicycle use only
|
|
|
Tattoo bars feature an engraved flame design on exposed sections. Drilled for internal wires; works with standard controls. Brilliantly show-chromed. Springer-style bars have the area between the risers increased to 1 1/4" for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles, 86-94, 95-04 and mini gauge. 1 1/4" thick risers are also available to complete the Buffalo look; accepts 1" diameter...
|
|
|
|
|
|
Chrome 1" steel handlebars for pre-1982 Big Twin and Sportster models or those from 1982 to present (with wiring recess).
|
|
|
10" Ape Hanger
Replacement 10" ape hanger handlebar for all models. This is the OEM ape hanger handle bar made by Ridley with holes for internal wiring. Available in chrome.
|
|
|
these ape hangers are designed with 1/2”-20 riser thread
|
|
(US)
