|
Note: The IR In is used to broadcast an Infrared signal out all 16 ports. To do this simply connect the IR output on the Ocelot™ to the IR input on the SECU-16IR™ using a mono 3.5 mm cable. When you send an IR signal out the Ocelot IR out port, that IR signal will be broadcast out all 16 IR ports.
|
|
|
Home theater control. Indoor/outdoor lighting control. Fire and security monitoring. Weather monitoring. CCTV control. Telephone interface. Lawn and indoor irrigation. Utility monitoring. HVAC control. Audio equipment control. Aquarium control. Swimming pool monitoring and control. Drapery control. And much more...
|
|
|
6.5"L x 3.75"W x 1.38"H. 9-16 Volts AC or DC, 150ma. RS232 - DBSF w/6' Cable. X-10 - RJ11 w/6' Cable. Infra-Red In - Stereo Jack. Infra-Red Out - Stereo Jack.
|
|
|
Supervised Digital I/O Module. Supervised Digital Input Module. Infrared Output Module. High Current Relay Output Module. Speak-Easy Voice Module. Octal Interface Module. Video Overlay Module. 1-Wire Interface Module. Adnet Modem. Bridge Module. Multi-I/O Module.
|
|
|
Allows the Ocelot Controller to issue pre-recorded messages. ...
|
|
|
The SpeakEasy™ module interfaces to the Leopard™ or Ocelot™ controllers to play pre-recorded audio messages. Messages may be recorded using the on-board microphone or any audio line-level device such as a PC soundcard, tape deck, etc. The Speak-Easy™ has the option of 50 five second messages, 24 ten second messages, or 12 twenty second messages. The Speak-Easy™ can drive an 8 ohm speaker directly or may be connected to an external audio amplifier.
|
|
|
Description APPLIED DIGITAL ADICON ADNET-Modem™ USED WITH ADICON OCELOT AND ADICON LEOPARD CONTROLLERS The Applied Digital Adicon ADNET-Modem™ connects to the OCELOT™ OR LEOPARD™ to provide more flexible control of the ADICON 2500 Series of controllers. The ADNET-Modem™ connects to the OCELOT™ OR LEOPARD™ using a null-modem cable. Using the C-Max Software provided with the OCELOT™ OR LEOPARD™, you can call into the ADNET-Modem™ and monitor the status of the ADICON 2500 series. You don’t need any...
|
|
|
Description CONNECTS TO ADICON OCELO/LEOPARD CONTROLLERS BOBCAT TEMPERATURE SENSOR The Temperature BobcatsÖ are a single point module which provide temperature readings. The Temperature Bobcat is available in both Fahrenheit and Celsius. The Fahrenheit sensor has a range of -20â*F to 170â*F. The Celsius sensor has a range of -18â*C to 77â*C. These new modules, controlled by either the Ocelot or Leopard, provide single-point control for various functions.
|
|
|
Description CONNECTS TO ADICON OCELOT/LEOPARD CONTROLLERS BOBCAT HUMIDITY SENSOR These new modules, controlled by either the Ocelot or Leopard, provide single-point control for various functions, including: The Humidity BobcatÖ is a single point module providing relative humidity readings from 5% to 95% RH.
|
|
|
Description ADICON SUPERVISED DIGITAL I/O MODULE WITH IR CONTROL Features sixteen switched zones of Infrared output. RS-485 interface for connection to the ADICON network to send an IR output to any zone desired. When used in stand-alone mode, the IR input is amplified and sent to all sixteen output zones. When used with the Ocelot Controller, any combination of output zones can be selected for each IR transmission. IR emitters sold separately.
|
|
|
Features sixteen switched zones of Infrared output. RS-485 interface for connection to the ADICON network to send an IR output to any zone desired. When used in stand-alone mode, the IR input is amplified and sent to all sixteen output zones. When used with the Ocelot Controller, any combination of output zones can be selected for each IR transmission. IR emitters sold separately.
|
|
(US)
