|
Makita 4200NH 4-3/8 Circular Saw, 9.1 AMP
* Ball and needle bearing construction for smooth operation. * Well balanced and light for easy handling. * Lock-off button helps prevent accidental starts. * Blade is on the left side. * Dry cutting of stone and masonry with optional diamond blade. * Includes:. * Blade Diameter: 4-3/8". * Arbor: 3/4". * Max. Cutting Capacity:. * No Load RPM: 11,000. * Watts out: 1,150. * AMPS: 9.1. * Length: 9". * Net Weight (lbs.): 6.8.
|
|
|
|
|
|
Makita 4100NH 4-3/8 Masonry Saw
* Makita built motor delivers 12 AMPS for various cutting applications. * Increased 1-3/8" cutting capacity. * More compact design at only 8-5/8" long and weighs only 5.9 lbs. for less operator fatigue. * High power to weight with 13,000 RPM. * Easy to adjust depth gauge for precision cutting. * Lock-off button helps prevent accidental starts. * Flat rear side of motor housing allows for easy blade changes. * Includes:. * Blade Diameter: 4-3/8". * Arbor: 20mm. * Max. Cutting Capacity:....
|
|
|
Porter Cable 12121, 4-1/2" Circular Saw Blade For cutting plexiglass, 3/8" Arbor
|
|
|
DeWalt DW3184 8-1/4 40T Carbide Tipped Thin Kerf Circular Saw Blade
The DeWalt DW3184 is a 8-1/4" 40 Teeth Carbide Tipped Thin Kerf Circular Saw Blade. This is series 20 construction designed to deliver the cut quality, speed and durability to stand up to the toughest jobsite use. It has exclusive wedge shoulder for increased durability. The patented ribbed heat vents eliminate blade flexing and binding for long lasting performance.
|
|
|
Makita 4101RH 4-3/8" Circular Saw
Blade on left side of saw. For wet cutting of tile masonry and concrete. Lock on button for continuous operation. Adjustable depth of cut. Special cover design prevents water from entering into motor housing. Ground fault circuit interrupter (GFCI) plug.
|
|
|
HSS Blade cuts plastic, fiberglass, wood, non-ferrous metals, sheet steel up to 19 ga, Star Drive for maximum torque transmission of power to the work surface, Circular Saw Blades. Note: Blades may not be sharpened. Tools, Power Tools, Fein Tools, Fein Multimaster
|
|
|
General Purpose Saw Blades
|
|
|
Freud Model # DO436X. FINISHING - MICROGRAIN CARBIDE. CONSTRUCTION GRADE. DIABLO. 20MM ROUND ARBOR. Carded. Dia. Inches=4-3/8. Teeth=36. Unit: 1 per card. Unit Weight: 0.2000 lbs. UPC Code: 008925020820.
|
|
|
MAKITA SAW BLADE. *4-3/8. *Designed for Makita Model. No. 4200N (Ace No. 20314). *Carbide tipped. *20mm arbor. *24 tooth. *Carded.
|
|
|
|
|
|
For use with model No. 5090D and 5090DW. 15mm arbor. No. 721003-8: Combination blade, general-purpose rips or crosscuts, 50T No. 792299-8: Fine tooth blade, smooth cuts in thin materials, 50T No. 792611-2: Carbide-tipped blade, fast, smooth cuts, thin kerf, 20T
|
|
|
Cut through your workload like never before with the TS 75 plunge-cut saw. Take on bigger projects with our largest cutting depth yet - 2 15/16" or 2 3/4" with the included guide rail. And with 13 amps of adjustable power, the TS 75 has plenty of muscle to spare - powerful enough to cut through steel doors. And it won't tire you out as quickly since it weighs less than 14 lbs. A limit stop and slip clutch drastically reduce the effects of kickbacks, making the TS 75 much safer to use. The splinter...
|
|
|
* 5 3/8 in. Diameter blade. * Tungsten Carbide Teeth; 24T. * Application: rip / cross cut. * Saw Type: circular saw. * Manufacturer Part No. : 73524.
|
|
|
|
|
|
Powerful 14.4V battery. Compact and well balanced for easy handling. High performance "Makita" motor lasts 5 times longer. Makita exclusive externally accessible brushes for longer tool life. 2-speed gear selection (0-400 RPM or 0-1,300 RPM). 18 torque settings, 330 in.lbs. maximum torque. Keyless chuck for easy bit installation. Conveniently located forward/reverse button Capacity Steel 3/8" Capacity Wood 1" No load speed: (Low) 0 - 400 RPM No load speed: (High) 0 - 1,300 RPM Maximum...
|
|
|
* Bosch offers cordless circular saw blades for both general purpose and fast cutting applications. * Cordless Series Circular Saw Blades. * Item # CBCL524A. * Blade Diameter 5-3/8″. * # of Teeth 24. * Arbor Size 5/8″. * Hook Angle 22°. * Kerf .063″. * Max. RPM 4,800.
|
|
|
Fein 6-35-02-103-05-0 is a 3-1/8 HSS Circular Saw Blade (5 / Pack). Universal use on sheet metal of up to approx. 1 mm, Easily slice through plastic, fiberglass metals. The high-speed steel blade provides longer life and better cutting ability.
|
|
|
Makita 5094DWD, 14.4V 3-3/8" Cordless Circular Saw Kit
Adjustable cutting depth with easy to read gauge on blade housing. Bevel cuts 0° - 45°. Shaft lock for easy blade changes. Blade Diameter 3-3/8". Arbor 15mm. Max. Cutting Depth 45° 11/16". Max. Cutting Depth 90° 15/16". No Load RPM 1,000. Watt Hours 37.4. Battery (Ah) 2.6. Length 12-5/8". Net Weight (lbs. w/battery) 4.6. Shipping Weight (lbs.) 9.8. UPC Code 088381045049. (1) Makita Battery 1434 (193158-3). (1) Makita Charger DC1411. (1) Makita Carbide tipped blade (792611-2). (1...
|
|
|
Metal seated ball bearing wards off damage to the motor caused by high temperatures and vibration, adding to its overall performance and durability
|
|
|
View more Lifetime Carbide items 5-3/8", 24 Tooth Tungsten Carbide Tipped Circular Saw Blade
|
|
|
Introducing a lightweight durable circular saw that cuts wood, paneling, aluminum or plastic with speed and efficiency. Its heavy duty rigid steel shoe with angled ends for added stiffness ensures durability. (optional guide rule.)
|
|
|
Use arbor 35-394 or 35-395; Cuts 1-3/8 inches deep; Cuts any material that can be cut with a hacksaw blade; High-speed steel; 4-6 teeth per inch, variable pitch, positive rake, M3 bi-metal tooth design; Fits standard arbors available from IDEAL; Knock-out slots for easy core removal
|
|
|
5008FA is a NEW Replacement for 5008NB. * Ball bearing construction for longer tool life * Flat motor housing design for stability when changing the blade * Bevel cuts 0-45° with a 45° bevel capacity of 2-1/4" * Conveniently located shaft lock for easy blade replacement * Technologically advanced centrifugal fan and baffle for efficient cooling of the motor * Double insulated INCLUDES: * 8-1/4'' x 24T Carbide-Tipped Blade * Rip Fence (164095-8) * Wrench #13 (782016-4)
|
|
|
4-3/8" (112mm) Diameter. This new Master-Grit Hole Saw from Lenox brings the same quality and advantages to the special requirements of recessed lighting applications. Fast and smooth cutting, with high abrasive resistance. The tungsten carbide continuous edge cuts in both directions without snagging or binding. Grit hardness RA 90-93.
|
|
(US)
