|
The tool features an extremely rugged motor and gear train that is capable of handling some of the toughest jobs and is durable enough to withstand job-site abuse. The 0721 features a 1/2 inch keyed chuck that includes a thick, clear coat finish to help prevent rusting.
|
|
|
Voltage 28 DC. Chuck Size 1/2 in. No Load Speed 0-400/0-1,000 RPM. Torque 1,081 in.-lbs. Chuck Type Keyed. Reversible Battery No. No. of Batteries Included 0. Spindle Lock No. Capacity in Steel 1/2 in. Capacity in Wood 2-9/16 in. Length 18-1/2 in.
|
|
|
|
|
|
Ratcheting, single-sleeve chuck with carbide jaws for superior gripping strength. Metal hammer selector for added durability. Heavy-duty 2 speed gear box, with all metal gears, delivers 0-600/0-1,800 RPM; 0-9,000/0-27,000 BPM. 28 Volt Milwaukee high power motor delivers 600 in-lbs of torque. Clip-Lok(TM) System secures tool to belt with one hand. Comfortable non-slip soft-grip reduces vibration grid fatigue. Reversible Battery pack allows user to change drill balance for overhead work or in...
|
|
|
3Com 325W Power Module - 3C16075
3Com SuperStack 3 Switch 4900. 3Com SuperStack 3 Switch 4924. 3Com SuperStack 3 Switch 4900 SX. 3Com SuperStack 3 Switch 4400 PWR. 3Com SuperStack 3 Switch 4950. 3Com SuperStack 3 Switch 3870, 24-Port. 3Com SuperStack 3 Switch 3870, 48-Port. 3Com SuperStack 3 Switch 3848. 3Com SuperStack 3 Switch 3226. 3Com SuperStack 3 Switch 3250.
|
|
|
|
|
|
Product IDDC910. ondition USED,IN GOOD CONDITION,WORKS GREAT!. Package DEWALT DC910,1 hour charger ,(1) 28V XRP battery. Volt 18V. priceUS $305.80. sale priceUS $271.5.
|
|
|
*Low Cost Power Supply. *2 Lamps, 20 Watts. *NEOBE Flash. *RFI Filters. *.
|
|
|
High Power Relay
A big guy. This chassis-mounted relay is rated for 30A at 300VAC, 15A at 600VAC, 25A at 28VDC, 1 hp at 120VAC, and 2 hp at 240VAC. Coil will draw approx 40mA at 120VAC, and needs at least 80VAC to engage the (2) sets of SPST contacts. Measures 2" x 1-3/8" x 1-1/2" with 1/4" Q/D terminals on the bottom and a 1/8"-32 mounting hole and a mounting tab on one side. Deltrol part number 23063-70
|
|
|
A490T CF SINGLE POWER SUPPLY
Lightweight, compact unit for installation in the wingtips and tail of the aircraft, eliminating long runs of high voltage interconnecting cables. Only an 18 gauge low voltage wire supplies power to each power supply and between wingtip mounted power supplies and switch. This system is not synchronized. Flashes 50 times per minute (comet flash).
|
|
|
Preferred Power Products 12 or 24 VDC / 5 AMP / 28 VDC DPDT Contacts
Preferred Power Products 12 or 24 VDC / 5 AMP / 28 VDC DPDT Contacts
|
|
|
Oval Shaped, 3 pin external power receptacle, designed to mount in opening in the skin of aircraft. Mates with AN2551 type plugs. Use with Oval Plug 405-0001.
|
|
|
Power Supply, Output 24Vdc @ 12A OR 28V @ 10A Input:100/120/215/230/240 - 50/60Hz 6.8/5.8/3.2/3.0Amp Condor
|
|
|
Aqua Power AQP 95004 EYEBALL, REPLACEMENT 28V-WHITE
Protect your boat from damage while docking at night. 30,000 cp. bulb illuminates below the deckline. makes night time docking safe & easy. Newly-designed housing is fully sealed. Water cannot enter hull through docking light. Intended for docking only; not for continuous use. 10-1/8" long x 7-1/8" height and 5/1/8 recess.
|
|
|
85-264 VAC Input Range. Overvoltage and Short Circuit Protection. 1% Ripple Voltage. 2% Total Regulation. Approved to UL, CSA and EN Standards. Small 50 mm × 80 mm Footprint. EN60601-1 Approval. Class II Model Available (G2T30).
|
|
|
200 or 300 VA torroid transformer w/12 inch leads, Dual 115 vac primary. Large electrolytic, filter capacitor. Full Wave Bridge Rectifier. 12v and 5v Voltage Regulator. Drilled and tapped, aluminum heatsink/mounting plate, with 4, 3/16 dia. mounting holes. Terminal strips. Component mounting hardware (screws, brackets, etc). Circuit schematic.
|
|
|
Milwaukee 48-55-0935 CASE CARRYING 28V HAMMER DRILL
|
|
|
Power Relay
Plug-in relay, DIN mount base (included). 8 A. Ballast. 12 A. General purpose. 10 A. Tungsten. Coil: 60mA @ 12VDC. Normally Open (N.O.) contact. UL C9805 CSA, CE approved).
|
|
|
|
|
|
The T1P3003028-SP is a Power Band™ discrete pHEMT, depleti on mode, RF Power transistor designed to operate from 500MHz to 2GHz in wide-band circuits. The device has an instantaneous band-width P1dB output power of 30Watts across the entire band when operated in the TriQuint wide-band test fixture. The T1P3003028-SP can also be used in narrow band applications and is rated at 40Watts P1dB at 2GHz.
|
|
|
Sight flow indicators are a low-cost, durable rotor-style flow indicator. Choose from models that provide basic visual flow indication or models with output for remote flow monitoring. Units are constructed of clear plastic, enabling 360deg viewing of the spinning rotor for easy flow indication. Models constructed of polysulfone (PSF) have excellent chemical compatibility, high pressure and temperature ratings, and all wetted materials are FDA/NSF rated for potable water applications. Models that...
|
|
|
Power-One - PFC500-1028F - Allied
Fully-regulated outputs. Remote sense. Logic level inhibit. Current share, power fail, and power good Signals. Overtemperature, overvoltage, and overcurrent protected. Wide Range Input. Single, Triple, and Quad Output Models. Power Factor Correction Meets EN61000-3-2. CISPR 22 Level B, FCC Level B. Fan Option — Add “F” Suffix. Main Output Remote Sense. Fully Regulated Outputs. >0.98 Power Factor Correction. UL 1950 and EN60950 Approved.
|
|
|
|
Solid-State Power Sensing Module - 2.5 to 28VDC
Input Resistance: 10 kohm. Control Resistance: 200 ohm. Output Supply Voltage Range: 4.5 to 6 VDC. Turn-on time: 10msec. Turn-off time 10msec. Output Leakage With No Input: 0.01 mA @ 30 VDC.
|
|
|
|
|
|
|
*Low Cost Power Supply. *2 Lamps, 20 Watts. *NEOBE Flash. *RFI Filters. *.
|
|
(US)
