|
2-6 Cell Lipo Pack Balancer
Ultra-Balancer is the simplest method of keeping your Lipo packs balanced. It can be used for packs up to 22.2 volts (6S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged. 2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required. offer an adapter in the "Accessories" category to facilitate the balancing of Thunder Power packs...
|
|
|
Intelligent LiPo Balancer. 2-6 Cell
Features Protect, maximize the performance and extend the life cyles of 2- to 6-cell LiPo batteriesAutomatic cell count detectionConfirms each cell condition by displaying the actual voltage of individual cellsThree adapter styles are compatible with Losi, Thunder Power and E-flite brandsThis maintenance balancer can be used in conjunction with a LiPo balance charger or independently with a LiPo battery onlyPlease note, the Intelligent LiPo Balancer (LOSB9625) does not replace the need for a LiPo...
|
|
|
Features and Benefits. Smart universal charger for Li-Ion and polymer Li-ion battery pack with capacity > 500mAh. 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V. Charges pack made of 1 to 4 cells. Universal 100V - 240V AC input for worldwide power usage. 500 mA constant charging current. Automatic charging stop when battery pack is fully charged , or when each cell 's voltage reaches 4.2V peak. LED indication: Red means " In Charging " and Green means " Full " or "open circuits ". With...
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
|
Over Discharging of Lipo Batteries i.e. below 3v per cell (6v - 2 cell battery packs) may lead to irreversable damage. It is recommended you install a on board battery volt meter and/or enable the low voltage lipo cut off function on your speed controller.
|
|
|
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 6 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer, 6.0V LiPo Regulator Recommended
|
|
|
Factory-matched cells for maximum performance and reliability. 30C (117 amp) continuous and 60C (234 amp) burst discharge capabilities. Extremely low-resistance, factory-installed 10-gauge main power leads and Deans® Ultra Plug® connector. Thunder Power balance connector and leads compatible with all TP balancers and chargers with balancers. Impact-resistant case for added protection and improved durability throughout a variety of driving conditions. Rounded-corner case design fits even the...
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer, 6.0V LiPo Regulator Recommended
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
|
Equipment Needed: LiPo Balance charger capable of charging 2 cell LiPo batteries, Or a LiPo charger with an External Balancer
|
|
(US)
