|
CMT 219.080.10 10-Inch by 80 Tooth, .012 Kerf, 5/8-Inch Bore Miter and Radial Arm Circular Saw Blade
Miter and radial arm saws offer you a wide range of uses, so CMT gives you a compound blade designed to meet their specifications. - the -5° hook angle, thin kerf and high tooth count allow you to make splinter-resistant top and bottom cuts in plywood, hardwoods, softwoods and laminates. - the negative hook keeps the blade from climbing at aggressive feed rates. With these features, CMT blades offer super performance on radial arm and miter saws and guarantee you a safer, more efficient working environment.
|
|
|
10 Inch, 100T Melamie/Veneer Table/Miter Saw Blade
-Hi-ATB design with negative (-5) rake angle tooth geometry - NO TEAR OUT!-Traditional full-kerf, European Style blade design-C-4 hardness, super fine grain, anti-corrosive carbide tips for the keenest edges and extended sharp life-Specially developed, top-grade, super fine grain carbide tip-NEW Additional, resin-filled, laser cut body slots succeed in vibration dampening to an even greater extent-Exhaustive, hand-hammer plate tensioning assures truer and smoother cuts-Longer Lasting than our competitors...
|
|
|
* Optimized for straight or compound angles where precise cuts are critical. * Miter Saw Blades. * Item # PRO1072SM. * Diameter 10″. * # of Teeth 72. * Arbor Size 5/8″. * Tooth Design TRI. * Hook Angle 0°. * Plate Thickness .086″. * Kerf .118″. * Tool Type Miter / Table / Radial Arm. * Max. RPM 6500.
|
|
|
The Super 10" 3-piece saw blade package contains a dedicated ripping blade, a dedicated cross-cut blade and the ultimate blade for your 10" miter saw. This blade package gives you the three most useful sawblades in the shop at an unbeatable value. Experienced woodworkers understand how important it is to use the right blade for each job and this package has been specially designed to give you the tools you need at the price you want. Use our 10" x 24-tooth Ripper to produce rips so smooth that they are ready...
|
|
|
Makita A-93550 10 70 Tooth Carbide Tipped Quiet Cut Miter Saw Blade
makita A 93550 10 70 Tooth Carbide Tipped Quiet Cut Miter Saw Blade Makita A 93550 Specifications: 70 Tooth Carbide Tipped 10 Blade Makita A 93550 Features: For use with Makita LS1011
|
|
|
-Laser cut, fully-hardened tool steel plates for industrial use-Individually hand-tensioned plates for true, accurate cuts-Built-in dampening system to minimize vibration and reduce noise-Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life
|
|
|
Jet JMS-10CMS, 10 Compound Miter Saw
Arbor Size Bevel Stops3 at 0, 45 and 90 left Cut Capacity @ Cross x 5-1/2 Miter Capacity0 45 left and right Miter Stops9 stops, -45 to 45 Blade Diameter10' Blade Speed4800RPM BrandJet Height17.3inch Length23.2inch Model NumberJMS-10CMS Motor Current15A Ne
|
|
|
Makita LS1040 10 Compound Miter Saw
* Powerful 15 AMP motor for improved performance. * Dual post compound pivoting arm. * Bevel cuts up to 45° to the left. * Miter cuts 0-45° left and 0-52° right. * Positive stops at 9 settings; 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts). * Weighs only 24.2 lbs. for easy portability. * Precision machined aluminum base ensures accurate cuts. * Performs compound cutting operations. * Shaft lock for easy blade changes. * Includes 10" 40 tooth carbide tipped blade. * Blade Diameter...
|
|
|
Hitachi C10FSH 10 Sliding Dual Compound Miter Saw with Laser
Unique, adjustable laser marker, for precise cutting lines easily adjustable to users preference. 12 Amp motor, intense power for the toughest cutting jobs. 57° miter angle, to the right for ultra flexibility with 45° miter angle to the left. 45° bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place. Positive stops on miter and bevel scale, for easy to read measurements and quick settings. Linear ball bearing slide system...
|
|
|
Makita A-94758, 10" x 40 tooth miter saw blade is Ultra coated to reduce pitch build up Quiet Cutting: Resin Bond Filled Laser Cut Slots Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness equals Premium Crosscutting Ideal for: Construction Lumber and Plastics
|
|
|
Bosch PRO1072SM 10" 72T TRI Miter Saw Blade
* Tensioned plates maintain flatness and stability for the life of the blade
|
|
|
Porter Cable Miter Saw Blade, RipTide 10", 40T, Slide Compound Miter Saw Blade - 12900
Get more power out of your saw with Porter-Cable's Riptide saw blades. The thin-kerf design reduces drag on the motor, allowing the saw to cut more effectively. The teeth are made of fine-grained tungsten-carbide to stay sharp longer. Each tooth is ground on all four exposed sides for maximum sharpness. Even though the blade is thinner than standard blades, the body is fully heat hardened and has computer-mapped cooling vents to maintain trueness.
|
|
|
#400 grit diamond ground teeth for a smooth finish Precision tensioned and balanced blade for an accurate cut Construction grade carbide teeth for longer life Thin kerf for fast cuts
|
|
|
Makita A-93675 10 Inchx5/8 Inch 60T Micro Polished, Miter Saw Blade
Makita A-93675 is a 10-Inch 60T Micro Polished Miter Saw Blade. It has an ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting. The Japanese Ultra Thin Kerf Carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Fully hardened and expertly hand-tensioned steel saw plates for true cuts. Micro-grain Carbide Teeth are honed with up to 600 grit for a mirror finish
|
|
|
Comment: I've had a Freud ripping blade on my table saw for quite a while and have been impressed. So when I got tired of the raw cuts from my SCMS (that's Sliding Compound Mitre Saw) I bought the Freud LU91M010 60 tooth blade on and it cuts like butter. No tear out and glides across the board. I upgraded from some 40 tooth dewalt crosscut blade that was probably more suited for construction. (...)it is a pretty good deal compared to the forest. I didn't get the teflon version because every one complains...
|
|
|
Diameter: 10". Teeth: 24. Arbor: 5/8". Kerf: .095". Hook Angle: 20°. Grind: ATB.
|
|
|
Irwin 14070 10 40T Marathon Miter/Table Saw Blade
irwin 14070 10 40T Marathon Miter/Table Saw Blade Marathon Miter/Table Saw Blade 14070 Features: #400 grit diamond ground teeth for a smooth finish Precision tensioned and balanced blade for an accurate cut Construction grade carbide teeth for longer life Thin kerf for fast cuts 14070 Specifications: Diameter: 10 Teeth: 40 Arbor: 5/8 Kerf: 0.095 Hook Angle: 20 Degrees Grind: ATB Package Type: Carded
|
|
|
Powerful 2.5 HP, 15 amp motor provides the power needed for heavy duty jobs. Crosscut work pieces up to 2-5/8" x 5-1/2" at 90 deg. Bevel cuts. 10 inch diameter carbide tipped blade stay sharp and makes clean cuts. Dust collection bag helps keep work area clean. Die cast aluminum fence has a permanent marked rule for quick and easy line ups. Electric blade brake stops the blade quickly after the trigger switch is released. Extension wing and stop block provides additional support when cutting...
|
|
|
#400 grit diamond ground teeth for a smooth finish Precision tensioned and balanced blade for an accurate cut Construction grade carbide teeth for longer life Thin kerf for fast cuts
|
|
|
Product Description 10" Carbide Blades for Miter Saws - For Cutting Wood - 5/8" Arbor - 60 teeth - MAX 5,900rpm
|
|
|
|
|
|
Makita LS1013 10 Slide Dual Compound Miter Saw
* Award Winning Accuracy and Performance. * Dual steel rails with two linear ball bearings ensures stable, accurate and vibration-free cutting. * Precision bevel cutting up to 45° both left and right. * Miter cuts 52° right and 47° left with 9 positive stops at 15°, 22.5°, 31.6°, 45° left or right and 0°. * Adjustable pivot fence for supporting larger stock. * Cuts a 2 x 12 at 90° and a 2 x 8 at compound 45° left. * Powerful 15 AMP motor. * Includes 70 tooth carbide tipped blade. * Blade...
|
|
|
Irwin 24070 10 40T Marathon Miter/Table Saw Blade
irwin 24070 10 40T Marathon Miter/Table Saw Blade Marathon Miter/Table Saw Blade 24070 Features: #400 grit diamond ground teeth for a smooth finish Precision tensioned and balanced blade for an accurate cut Construction grade carbide teeth for longer life Thin kerf for fast cuts 24070 Specifications: Diameter: 10 Teeth: 40 Arbor: 5/8 Kerf: 0.095 Hook Angle: 20 Degrees Grind: ATB Package Type: Bulk
|
|
|
For crosscutting. Patented C-3 Dyanite® carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6X longer than standard carbide. Impact resistant tri-metal shims between each carbide tip and the blade act as shock absorbers in tough applications. A fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true. Expansion slots reduce blade warping.
|
|
|
120V, 13A motor w/electric brake and spindle lock - 5/8" arbor. Upfront controls provide easy and efficient access to miter and bevel angle settings. 52° left/60° right miter angle range - exclusive wedge & slot miter detent. Soft grip, horizontal D-handle. Sliding fence has "quick release" for fast and easy adjustment. Dual workpiece support extends from 21" to 36". Includes 40T carbide tipped blade, quick clamp, wrenches, dust bag, directional dust chute and complete instructions. 54 lbs...
|
|
(US)
