|
The Hitachi C10FSB 10-Inch Sliding Dual Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, decorative panels, soft fiberboard, hard board, and aluminum sashes. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C10FSB offers professional-grade performance with its dual-bevel cutting action, soft start function, electric brake feature, electronic speed control, and more. C10FSB...
|
|
|
This miter saw has a dual slide rail system which allows for cutting up to 12 inch wide boards. Ideal for crosscutting of miters, bevels and compound cuts. The AC laser projects a laser accurate line on workpiece for precise pre-alignment. Powerful 15 Amp Ball Bearing Motor with electric brake provides the power for heavy duty jobs. The 60-tooth carbide tipped blade stays sharp and makes clean cuts. Built-in positive miter and bevel stops for the most commonly utilized cutting angles. Two retractable extension wings with stop plate provide extra support of workpiece on both sides of the table. Lightweight, portable design with built-in carry handle for easy transporting from worksite to worksite.
|
|
|
DEWALT 10" Double Bevel Sliding Compound Miter Saw
Three-Year Limited Warranty. DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives...
|
$479
See 2 Stores
See All Stores
|
|
The JET® B3NCH 10" dual bevel sliding compound miter saw is precise enough for all your home projects and portable enough to take with you when you need a great saw on the job. With dual bevel capacities of 0°, 33.9°, and 45° left and right, a quick cam miter lock, our Innovative Green XACTA Laser, the high performance laser system Exclusively from JET® that projects an accurate, high-visibility guide line for precision cuts, even outdoors, and a powerful 15 amp, 4800 RPM motor, this saw is the...
|
|
|
Hitachi C10FSH 10" Sliding Dual Compound Miter Saw with Laser Marker
Hitachi C10FSH 10" Sliding Dual Compound Miter Saw with Laser Marker Technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products. Hitachi C10FSH 10" Sliding Dual Compound Miter Saw with Laser Marker Features; Unique, adjustable laser marker, for precise cutting lines easily adjustable to users preference 12 Amp motor, intense power for the toughest cutting jobs 57° miter angle, to the right for ultra flexibility with 45° miter angle to the left 45° bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place Positive stops on miter and bevel scale, for easy to read measurements and qui
|
$489
See 6 Stores
See All Stores
|
|
Cut with confidence. Metabo saws' superior engineering and innovative design give you accuracy every time, plus versatility and ease of use. You can count on Metabo saws' technical quality for efficiency and long life. Metabo. Work. Don't play.
|
|
|
Item:9708 Manufacturer Model # TSS100L Ryobi 10" Sliding Compound Miter Saw With Laser Great Value on this easy to use saw!
|
|
|
45 Degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place
|
|
|
Festool 561287 KAPEX KS 120 EB Sliding Compound Miter Saw
Festool 561287 KAPEX KS 120 EB Sliding Compound Miter Saw Portability - The ergonomically designed carrying position combined with its light weight (47 lbs.) make the Kapex easy to move around the job site. When being transported, the Kapex's head is locked down making it compact and preventing movement. Light Weight, Compact Footprint - The magnesium alloy base of the Kapex was designed to be extremely ridgid and durable yet very lightweight when compared to other 10" miter saws. Deck Height - The deck height matches the height of your systainer 1 storage containers. On the jobsite, you can use one or more systainers to support the material being cut. Counter Spring Balanced - The bevel adjustment is counter spring balanced meaning that you can position the bevel at any angle and the head will stay in position even when it is not locked in place. This makes angle adjustment much less tedious and more accurate. Bevel gauges are on both sides of the saw for quick, easy reference. Dust Hood - The Kapex features
|
$1,300
See 5 Stores
See All Stores
|
|
DeWalt Recon DW717R 10 Dual Compound Sliding Miter Saw
DeWalt DW717R Factory Reconditioned DW717 10-Inch Double-Bevel Sliding Compound Miter Saw, 15 Amps
|
$439
See 3 Stores
See All Stores
|
|
TD Industrial 10024L 10-inch Sliding Miter Saw Get clean, accurate crosscuts with the 10-inch sliding miter saw from TD Industrial Power saw comes equipped with a dust bag and material support arm Tool features a laser guide for extremely accurate and efficient cutting Safety lock off switch Blade lock button Weight of 53.75 pounds C-UL Listed Cutting Capacity: Miter cross cuts @ 90 x 90: 2.5 x 11.57 inches Miter cuts @ 45 x 90: 2.5 x 7.48 inches left Miter cuts @ 45 x 90: 2.5 x 7.48 inches right...
|
|
|
5300 RPM. Bevels 45° to the left; 45°and 90° cutting angles. Cutting capacities: 2-3/4" x 12-3/16" at 90°; 1-9/16" x 12-3/16" at 45°. 10" diameter, 60 tooth C2 carbide tipped steel blade. Precision machined aluminum table top with cast aluminum base. Easy access brushes. Comes with clamp, arbor wrench, and dust bag. 120 volts, 60 Hz. 5/8" arbor.
|
|
|
Bosch 10" Slide Compound Miter Saw
Powerful 13 Amps, 4,700 RPM, 2.8 max. HP. Crown miter detents 31.6° miter and 33.9° bevel detents for quick, accurate crown cuts. Large 25" aluminum base with 3" sliding extension for 28" total length Provides extra support. Tall 3-1/2" fence For easy bevel set-ups and increased crown molding cutting capacities. Dual rail design For superior accuracy. Exclusive wedge-and-slot miter detent system Consistent and precise miter angles. Miter detent override For easy setting of any neighboring angle...
|
$399
See 2 Stores
See All Stores
|
|
SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H...
|
|
|
Cuts Steel, Aluminum, Wood and Plastics using a single blade. Produces virtually no sparks with no coolant required. Blade capable of making 750 cuts in 2" mild steel box section. Laser guide for accuracy.
|
|
|
Freud LU91R010 - 10" 60-Tooth Industrial Teflon Coated Sliding Compound Miter Saw Blade
5/8-inch arbor. Perma-SHIELD-S coating. 5-degree negative hook. Ideal working range: 1/2- to 2-3/4 inches. Use with Hitachi C8FB, Makita LS111, radial-arm saws.
|
$64
See 3 Stores
See All Stores
|
|
Blade Diameter (in.): 10. Amps: 10.8. Bevel: Single. HP: 2. Max. Degree Miter Cuts - Left: 45. Max. Degree Miter Cuts - Right: N/A. Max. Degree Bevel Cuts - Right: N/A. Fence: Adjustable pivoting. Laser Guide: Yes. Wrench Included: Yes. Dust Bag Included: Yes.
|
|
|
Thin kerf saw blade used for sliding compound miter saws and radial arm saws. Designed for applications where minimum removal of saw is required. Computer designed hardened blade body with heat expansion slots give blade the capacity to execute 45 x 45 de gree compound miters without burning the wood. Alternate top bevel, .063" plate, .087" kerf, 15 degree hook angle.
|
|
|
Makita 10" Dual Slide Compound Miter Saw with Laser LS1016L
Makita. Largest crown molding cutting capacity in its class. Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free "dead-on" accurate cuts. Increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" cross cuts at 90º. Miters 0º-52º left and 0º-60º right, with positive stops at 0º, 15º, 22.5º, 31.6º, and 45º (left...
|
$575
See 3 Stores
See All Stores
|
|
Festool KS120 10 Inch Sliding Compound Miter Saw
Features The KAPEX was developed with one goal in mind: to be the best sliding compound miter saw. The KAPEX KS 120 is the first miter saw with variable speed, enabling the user to match the speed of the blade with the requirments of the material for perfect cuts. Finally, a sliding compound miter saw that combines a large cutting capacity with a compact lightweight design. The twin column forward rail design gives this saw greater precision in a small footprint. Features a swiveling dust extraction...
|
$1,300
See 2 Stores
See All Stores
|
|
Double Bevel Sliding Miter Saw, Blade Dia 10 In, Arbor Hole 5/8 In, Bevel Double, 4, 000 No Load RPM, 15 Amps @ 120V, Crosscut @ 90 Deg H 12 In, Crosscut @ 90 Deg W 12 In, Crosscut @ 45 Deg H 4 In, Crosscut @ 45 Deg W 8 In, Tool Weight 51 Lb, Miter Capacity 60 Left And 52 Right Deg, Bevel Capacity 0-48 Deg, Bevel Stops 7, Includes Blade And Dust Bag
|
|
|
Makita 10" Dual Slide Compound Miter Saw
Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free dead-on accurate cuts. Increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" cross cuts at 90º. Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity. Miters 0º-52º left and 0º-60º right, with positive stops...
|
$549
See 5 Stores
See All Stores
|
|
The world's first truly multipurpose Miter Saw which cuts Steel, Aluminum and Wood (even wood with nails) with the same blade. This machine is an essential addition to any workshop or tool kit. The RAGE3 Miter Saw offers all the accuracy and functionality of a normal Miter saw, but through materials never thought possible before - THE RAGE3 WILL CUT A COMPOUND MITER THROUGH STEEL BOX SECTION!
|
|
|
|
|
|
17282 30713 This thin kerf (090”) ATB blade has a 5 degree negative hook angle to provide a superior finish when used on a sliding compound miter saw. This hook angle helps prevent the blade from being overly aggressive and pushes work pieces down and into the fence. The thin kerf and Freud’s premium Perma-SHIELD(TM) non-stick coating allow faster feed rates while reducing horsepower requirements and material waste. 10” has a 5/8” arbor hole. 12” has a 1” arbor hole. Italy Cross Reference (Hartville...
|
|
(US)
