5
10" Smoothing Plane
$0
$330
/10%22+Smoothing+Plane?
|
Used for final finishing work, this Plane has a perfectly flat sole that will smooth any wood surface. Features include rosewood handles and knobs, full plane iron adjustments, cast iron bases, frog and lever caps, chip breakers and knurled brass adjusting nuts. Ground serrated sole improves sliding action by reducing resistance. Beautifully made with precision fit and finish.
|
|
|
HNT Gordon A55 Smoothing Plane - Gidgee
Length overall: 10 in. Blade size: 2 in. wide x 1/4 in. thick. Blade material: High Carbon Steel (HCS) Hardened to Rc 62-64. 55 degree cutting angle works well on figured grain and reverses to 85 degree cutting angle creating a scraper plane useful on difficult grain - HSS blade recommended for scraping work. Brass insert reduces wear at mouth. Body material: Gidgee. Adjustment: Fine thread screw with lateral movement (1/10th turn gives a meaningful change in depth). Well illustrated instructions...
|
|
|
The 260 is the latest and largest addition to the RALI line, and offers unique advantages along with the longest bed (260mm, or 10") of any RALI plane. If you prefer the feel of a conventional plane together with the unique benefits of RALI design and quality, the 260 is your answer! With its extra length and weight, this smoothing plane eagerly welcomes its tasks, and leaves you with perfect results! Offering a design more similar to common planes, the 260 is also the only RALI to incorporate...
|
|
|
The handle and front knob of the bench style models are hardwood and provide a nice touch in lieu of plastic. Frog surfaces are milled well. Lever caps are fitted with levers, another welcome improvement over the late Record screw design. More importantly, Anants throat openings are discreet and properly milled. They average just under .200 wide; with the frog set correctly, the opening forward of the blade is only about 3/64. The rear edge of the throat opening has been milled, exactly as it should...
|
|
|
The Lie-Nielsen No. 4 1/2 Bench Plane is based on the Stanley Bedrock model. Bedrocks were the top of the line; heavier and better made than the standard. The frog design is unique; a fully machined mating fit between the frog and the body. The design also allows precise and easy adjustments of the mouth opening from the rear without having to remove the cap and blade.These features, in addition to our A-2 cryogenically treated, double-tempered Tool Steel blade, make for a very solid tool that will give excellent...
|
|
|
(US)
