|
This slip resistant ramp is designed to be used on any surface and can easily be trimmed or notched for a custom fit. Made of 100% recycled materials. Ideal for indoor and outdoor use and can easily be moved to another location if needed. Ramp does not interfere with door tracks, making it great for use with sliding glass doors. Usable width is 36 in. (42 in. overall including bevels) with a maximum height of 1-1/2 in and a length of 12 in.
|
|
|
All threshold ramps are: For scooters and wheelchairs to make doorways sliding glass doors and raised landings easy to travel over * Easily installed * Made of extruded anodized aluminum that will not rust or corrode * 600 Lbs. weight capacity * Limit of use: 1 1/4 to 1 3/4 * Lengths: 9 1/2 * Used for sliding doors thresholds raised landings etc. * Dimensions: 9 1/2 L x 34 W
|
|
|
This self-supported Threshold Ramp from EZ-Access works for both scooters and wheelchairs. It's durable and light weight and because it's self-supported you don't have to worry about it getting caught by a door. EZ-Access Threshold Ramps can be used by themselves or combined with others sizes to make entry and exit easy and safe. All aluminum construction won't rust or corrode.
|
|
|
EZ-ACCESS Threshold Ramp - Threshold Ramp The EZ-ACCESS Threshold Ramp is a durable, inexpensive alternative when a ramp is not feasible or available. It bridges most standard and sliding door entries, allowing wheelchairs and scooters to enter and exit doorways with ease. The EZ ACCESS Threshold Ramp may be used for rises and features a durable 34" (86cm) wide, non-skid driving surface for maximum safety and support. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. EZ-ACCESS Threshold Ramp Features: Smooth and safe bridge door access Bridges most standard and sliding door entries Non-skid driving surface for fall prevention Affordable alternative to more expensive mobility ramps Anodized aluminum finish resists scratches and won't rust No tools required, simply place the ramp down and it's ready to use All Ramps can hold up to 600 lbs EZ-ACCESS Threshold Ramp Dimensions: 1" ramp: works best for 0.75" to 1.25" rise. Dimensions: 6
|
|
|
Designed for doorways that swing out. Aligns directly against the doors threshold. Durable welded construction. Anti-slip, high traction surface. Weight Limit: 600 lbs.
|
|
|
Rubber Beveled Threshold Ramps from EZ-Access create an easy ground-to-sill transition for your scooter or wheelchair while preventing skidding or slipping. Are you looking for something more environmental friendly, too? Don't fret, these ramps are made from 100% recycled tires and can withstand years of punishing use.
|
|
|
Self-supporting 1.5-inch Threshold Ramp Self-supporting threshold ramp is designed for doorways that swing out Ramp provides the perfect solution for overcoming thresholds Ramp designed to rest directly against the door's threshold Made of aluminum and surfaced with anti-slip traction tape Lightweight yet durable Threshold will accommodate a threshold height of 1 inch Ramp weighs 8 pounds Measures 16 inches long x 36 inches wide Maximum single axle capacity of 300 pounds and 600 pounds for double...
|
|
|
EZ-Access 1.5" Rubber Threshold Ramp (EZ-THR150)
Made from 100% recycled tires. Available in 1.5" and 2.5" heights. Two rubber ramps and a pair of optional Rubber Risers can be combined for a max height of 4.75". Rubber Risers (1 pair) are 24"x24" and weigh 23.5 lbs each. Slip-resistant rubber. Standard width is 48" - for wider openings, simply put two ramps side by side. Can easily be trimmed to fit lower heights and widths. Ideal for sliding doors, doorsills, thresholds.
|
|
|
this threshold ramp is 1.5" high and is a lightweight yet durable modular ramp designed to get your scooter or wheelchair across doorways sliding glass doors and other raised landings. threshold ramps may be used either one by itself or two combined to make entry and/or exit convient and safe. simply measure the height of the door entry and choose the correct size. they are constructed of extruded anodized aluminum that will not rust or corrode. made of aluminum non-skid surface different heights can be used together length: 2 10" width: 0 9.5" weight capacity: 600 lb
|
|
|
For scooters and wheelchairs. The EZ-ACCESSTM Threshold is a lightweight yet durable modular ramp designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size. Constructed of extruded, anodized aluminum that will not rust or corrode. Features a durable non-skid driving surface. Easy installation.
|
|
|
For use with manual wheelchairs, scooters, power wheelchairs. Constructed of extruded, anodized aluminum construction. Non-skid surface. Easy installation. Modular design. Use one or combine two to make entry and/or exit convenient and safe. Simply measure the rise of the place you want to use a threshold ramp and choose the correct ramp size.
|
|
|
2.5" threshold ramp (THRBE 250-1) is 43" x 25" x 2.5"H with a usable width of 36"; weighs approximately 40 pounds. Weight capacity: 850 pounds. Width is 48". For wider entrances, place two ramps side by side. Alternately, this ramp can easily be trimmed for lower heights and narrower widths to fit any entrance or threshold.
|
|
|
|
|
|
Low Bariatric Threshold Ramp
PVI's Low Bariatric Threshold Ramp is compatible with sills and drops from 1.5" to 2.5". It supports up to 800 pounds and comes with an anti-slip, high traction coating.
|
|
|
View Product Images This small threshold ramp is designed for doorways. These ramps are available in 8", 10", 12", 16", and 24" lengths by 32" wide. It has holes punched in each of the top corners for easy installation. Made of aluminum, surfaced with anti-slip, high traction safety tape, it is lightweight yet durable. Load capacity of this ramp is 300 lbs. per axle. Product Features Designed for doorways Lightweight and durable
|
|
|
1.5" Rubber Beveled Threshold Ramp by EZ-Access (BOX OF 2)
Rubber Beveled Threshold Ramps from EZ-Access create an easy ground-to-sill transition for your scooter or wheelchair while preventing skidding or slipping. Are you looking for something more environmental friendly, too? Don't fret, these ramps are made from 100% recycled tires and can withstand years of punishing use.
|
|
|
Non-skid surface for traction. 850 lb. Capacity. 1 Year Warranty. 1 1/2" rise for extra threshold clearance. Made of 100% recycled rubber. Free Shipping!. Order Two Ramps (Part #: THRW36-150-2) For Both Sides of Doorway.
|
|
|
The EZ-ACCESS® Threshold is a lightweight yet durable modular ramp designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size.
|
|
|
This slip-resistant ramp works on any surface. Trim or notch for a custom fit. Made of 100% recycled materials. Ideal for indoor and outdoor use. Does not interfere with door tracks, making it ideal for use with sliding glass doors, wheelchairs and scooters Usable width is 36 (42 overall including bevels).Weight capacity 850 lbs.
|
|
|
Sets up in seconds and no tools are required. Simply place ramp against threshold or raised landing for immediate use. For added safety, the free standing ramp can attached using pre-drilled holes and your own screws appropriate for the surface (wood, concrete, etc.).
|
|
|
For scooters and wheelchairs. The EZ-ACCESSGäó Threshold is a lightweight yet durable modular ramp designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size.
|
|
|
Threshold Ramp
Make your home accessible for a scooter, wheelchair or rolling walker with this easy-to-install threshold ramp. Lightweight anodized aluminum with durable non-skid surface will not rust or corrode; yet is rugged enough to support 600 lbs. Works on doorways, sliding glass doors and raised landings. 1.5" x 9.5" x 34". 5 lbs.
|
|
|
The threshold ramp is lightweight yet durable modular ramp designed for doorways, sliding glass doors, and raised landings. These ramps may be used either one by itself or two combined to make entry and or exit convenient and safe. Constructed of extruded, anodized aluminum that will not rust or corrode. Features a durable non-skid driving surface. Easy installation with a weight capacity 600 lbs.
|
|
|
These Bariatric Threshold Ramps provide a smooth transition over doorways and other raised edges. They are built extra strong and work well for larger scooter and wheelchair users. Built from lightweight aluminum with an anti-slip high traction coating.
|
|
|
Dambach Ramps sells aluminum steps and ramps for commercial businesses and residential use. We have aluminum ATV ramps, car ramps, trailer ramps, van ramps, wheelchair ramps, scooter ramps, automotive ramps, oil change ramps, walk boards, lawn and garden ramps, pet ramps and much, much more. We also have gift certificates and take Mastercard, Visa, Discover and American Express credit cards.
|
|
(US)
